SFCD: Federal Commander Digital System - Federal Signal
SFCD: Federal Commander Digital System - Federal Signal
SFCD: Federal Commander Digital System - Federal Signal
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Federal</strong> <strong>Commander</strong> <strong>Digital</strong> <strong>System</strong><br />
<strong>System</strong> Log: Displays a comprehensive log of all system activity<br />
Command Log: Displays a log of outgoing and eavesdropped activation commands<br />
The Command Log will automatically be displayed when an activation command from another<br />
base station is received.<br />
Reports<br />
This selection will cause the report selection menu to be displayed.<br />
Map<br />
This selection will cause the interactive map screen to be displayed.<br />
Activate<br />
This selection will cause the siren activation hotkey screen to be displayed.<br />
<strong>System</strong> Setup<br />
This selection will cause the <strong>System</strong> Setup dialog to be displayed. The <strong>System</strong> Setup dialog is<br />
used to configure system wide parameters.<br />
RTU<br />
This selection will display the RTU dialog. The RTU dialog is used to setup individual RTU<br />
parameters and access status information.<br />
Sinad<br />
This selection will pop up the SINAD test dialog box. SINAD test allows the measurement of<br />
signal strength between any two RTUs in the system. This selection is not applicable for<br />
Codespear enabled systems (Communication Mode = Codespear).<br />
Note Pad<br />
Allow operators to leave and retrieve messages.<br />
Logout/Login<br />
This selection will logout the current user and displays the Login dialog. The system will be<br />
“Locked” while the Login dialog is displayed.<br />
44<br />
<strong>SFCD</strong>WARE Main Screen
Change language