SFCD: Federal Commander Digital System - Federal Signal
SFCD: Federal Commander Digital System - Federal Signal
SFCD: Federal Commander Digital System - Federal Signal
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Federal</strong> <strong>Commander</strong> <strong>Digital</strong> <strong>System</strong><br />
4. Click <strong>SFCD</strong>WARE.msi. This will launch the automatic installation program. The<br />
installation program will prompt the user for information at various stages of the process.<br />
If you are not familiar with Windows setup procedures, enter the default option for all<br />
prompts. Upon completion, the <strong>SFCD</strong>WARE software will be installed and a shortcut<br />
icon will appear on the Windows Startup Group and All Programs Menu. After<br />
successfully installing the software, refer to section three for instructions on running the<br />
<strong>SFCD</strong>WARE program.<br />
IO Board<br />
If your system is equipped with the PCI-PDIS08 IO board the following steps must be performed<br />
AFTER the installation of the <strong>Commander</strong> software.<br />
Installing the hardware<br />
The PCI-PDISO8 board is completely plug-and-play. There are no switches or jumpers to set on<br />
the board. Configuration is controlled by your system‟s BIOS. To install your board, follow the<br />
steps below.<br />
34<br />
Installation
Change language