SFCD: Federal Commander Digital System - Federal Signal
SFCD: Federal Commander Digital System - Federal Signal
SFCD: Federal Commander Digital System - Federal Signal
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Unit Type<br />
<strong>Federal</strong> <strong>Commander</strong> <strong>Digital</strong> <strong>System</strong><br />
Contains the current unit type from the configuration screen.<br />
Unit Address<br />
Contains the current unit address from the configuration screen.<br />
Program Number<br />
The current program number displayed.<br />
Program Entries<br />
The number of program entries that are currently stored in memory. This number will always be<br />
six for FCD type sirens.<br />
DTMF (optional)<br />
If this code is to be activated by DTMF, enter the DTMF digits here. Acceptable DTMF digits are:<br />
0-9, A, B, C, D, *, #. For wildcard digits, precede the digit with an apostrophe (a wild card digit is<br />
valid for pound sign as well as the specified digit). Note: The DTMF selection is only applicable<br />
on systems that use DTMF signaling. If DTMF signaling is not used, this field should be left<br />
blank.<br />
Duotone (optional)<br />
If this is a tone type code, enter the A Tone and B Tone frequencies for this function here. The<br />
acceptable frequency range is 300-3000 Hz. Note: The duotone selection is only applicable on<br />
systems that use duotone signaling. If duotone signaling is not used, this field should be left<br />
blank.<br />
EAS Event (optional)<br />
148<br />
RTU