SFCD: Federal Commander Digital System - Federal Signal
SFCD: Federal Commander Digital System - Federal Signal
SFCD: Federal Commander Digital System - Federal Signal
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Federal</strong> <strong>Commander</strong> <strong>Digital</strong> <strong>System</strong><br />
This parameter is the numerical password that a person must enter when attempting to respond<br />
to a call from the <strong>SFCD</strong>WARE <strong>System</strong>, or when a person is Call-ing into the <strong>SFCD</strong>WARE<br />
<strong>System</strong>. During a Call-out, only the password associated with the phone number called is<br />
allowed. During Call-in, any of the passwords on file will be accepted as a valid password.<br />
Resend alarm notifications each time alarm condition is reported<br />
Select this option if it is desired to callout RTU alarms each time an alarm condition is reported.<br />
RTU alarms are reported each polling cycle.<br />
Do not repeat notification for existing alarms<br />
Select this option to callout only new alarms. This will prevent notification of the same alarm each<br />
time the system is polled.<br />
Map Setup<br />
This selection is used to configure a list of bitmaps for display on the interactive map screen. After<br />
making this selection, the Map Setup dialog box will pop-up:<br />
RTU dot locations linked to host (SfcdwareClient Only)<br />
110<br />
<strong>System</strong> Setup