SFCD: Federal Commander Digital System - Federal Signal
SFCD: Federal Commander Digital System - Federal Signal
SFCD: Federal Commander Digital System - Federal Signal
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Federal</strong> <strong>Commander</strong> <strong>Digital</strong> <strong>System</strong><br />
Client passwords may consists of 1-19 characters and are case sensitive. Click “Save” to save<br />
changes and close dialog. Click “Quit” to close dialog without saving changes.<br />
IP Address<br />
For security, only clients that appear in this list will be able to connect. Enter the clients IP<br />
address in dotted decimal format. If the first IP Address field is left blank, the system is open and<br />
all client connections will be accepted.<br />
All passwords are applicable to all IP Addresses.<br />
Codespear Server<br />
The Codespear Server items are only enabled when the mode selection is set for “Codespear”.<br />
IP<br />
Set the IP address of the Codespear server. This must match the Default Server setting<br />
assigned to <strong>SFCD</strong>WARE (Ref: Codespear SmartMsg Deployment Guide).<br />
TOS (Type Of Service)<br />
The TOS setting for <strong>SFCD</strong>WARE – Codespear communication; enter 0-7 if using IP TOS<br />
Precedence (RFC791) or 0-63 if using DSCP (RFC2474).<br />
Code Names<br />
The Code Names list box is used to assign names to activation codes for the various codes<br />
programmed into each RTU (Siren Controller). This name applies to all RTUs in the system. To<br />
106<br />
<strong>System</strong> Setup