Reg. Nr. L 6790 Wet 36 van 1947 - Bush Encroachment
Reg. Nr. L 6790 Wet 36 van 1947 - Bush Encroachment Reg. Nr. L 6790 Wet 36 van 1947 - Bush Encroachment
TABLE 6 WIPE-TYPE WEED CONTROL APPLICATION 24 Notes: • Use a wipe-type applicator that has been approved by Monsanto South Africa (Pty) Ltd. These applicators make use of an absorbent material to transfer ROUNDUP MAX ® solution onto plants with which the applicator comes into contact. • Ensure that the wiper surface is kept clean. The wiper must NOT come into contact with the crop. Remarks 100 - 150 l/ha solution recommended where conventional spraying is not practical, i.e. low trellised or bush vines, etc. Ensure complete dissolution of ROUNDUP MAX ® granules prior to application. Apply up to 3,0 l/ha solution in situations around tree crops and where weed / crop height differentiation exists, i.e. control of volunteer crop or resistant or late germinating weeds in beans and groundnuts. 25% Solution Annual 2,5% Perennial 5,0% Hand held or Tractor mounted rope-wick applicator. Hand held roller applicators. Applicator type
23 Notes: • Use recommended rates for the control of annual weeds (see Table 1) and perennial weeds (see Table 2) when renewing established pastures. • Use conventional or direct drill planting methods. • Ensure that rank weed growth does not prevent spray from reaching the target plants. • Do not spray old heavy growth of Kikuyu or Common quick grass with a reduced green leaf area. Burn at the end of winter to reduce dry mass. Allow to regrow in summer and spray regrowth late summer. Establish new pastures thereafter in autumn. Conventional: Mechanical plus chemical pasture renovation: Light Pressure: Prepare pasture seedbed. Allow perennial running grass and annual weeds to emerge. Apply ROUNDUP MAX ® at recommended rates for the weeds present (See Table 1). Sow new pasture 3 - 4 days after spraying. Heavy Pressure: Cultivate the weeds and allow regrowth to occur. Spray with the recommended ROUNDUP MAX ® rate. Allow 7 days after spraying. Pre-sowing weed control: New germinating annual weeds can be controlled with 0,5 - 1,5 Kg/ha. Cyperus spp requires 3,2 Kg/ha. Sow pasture 3 - 4 days after spraying. Pasture replacement and veld improvement: Reduce trash levels by mowing or heavy grazing 3 - 4 weeks prior to ROUNDUP MAX ® applications on regrowth. Drill the new pasture 3 - 4 days after spraying. Pasture maintenance: Control perennial and annual weed infestations in pastures by spot spraying with a 1,0% solution or using wipe-type equipment to weeds projecting above the pasture (See Table 6). TABLE 5 PASTURE RENOVATION Perennial running grass infestation
- Page 1: Reg. Nr. L 6790 Wet 36 van 1947 ‘
- Page 4 and 5: VOORSORGMAATREëLS • Moenie die s
- Page 6 and 7: GEBRUIKSAANWYSINGS GEBRUIK ALLEENLI
- Page 8 and 9: MENGINSTRUKSIES Verlangde Volume 5l
- Page 10 and 11: LUGTOEDIENING LUGTOEDIENING ROUNDUP
- Page 12 and 13: ONKRUIDBEHEER TABEL 1 EENJARIGE ONK
- Page 14 and 15: ONKRUID Cleome gynandra *Commelina
- Page 16 and 17: Onkruid Erodium moschatum Lantana c
- Page 18 and 19: TABEL 3 GEWAS AANBEVELINGS Gewasse
- Page 20 and 21: Dosis kg/ha 0,5 - 1,6 Tabel 2 1,0%
- Page 22 and 23: Gewasspesifieke Tenkmengsels Voorso
- Page 24 and 25: TABEL 5 WEIDINGOPKNAPPING Meerjarig
- Page 26 and 27: Die volgende handelsmerke en regist
- Page 30 and 31: 22 • Apply ROUNDUP MAX ® 5 - 10
- Page 32 and 33: Use recommended rates and adhere to
- Page 34 and 35: Apply to nursery and mature plants
- Page 36 and 37: Follow up spray or spotspray on reg
- Page 38 and 39: Apply before 12 leaf stage in tankm
- Page 40 and 41: 800-1100 g/ha 675-800 g/ha Flowerin
- Page 42 and 43: 10 • Stop spraying if the wind sp
- Page 44 and 45: • Ensure a fine, even droplet dis
- Page 46 and 47: • Place a 20 to 30 mesh screen ov
- Page 48 and 49: • For specific information on res
- Page 50: 2 • Consult your supplier in the
23<br />
Notes:<br />
• Use recommended rates for the control of annual weeds (see Table 1)<br />
and perennial weeds (see Table 2) when renewing established pastures.<br />
• Use conventional or direct drill planting methods.<br />
• Ensure that rank weed growth does not prevent spray from reaching<br />
the target plants.<br />
• Do not spray old heavy growth of Kikuyu or Common quick grass with<br />
a reduced green leaf area. Burn at the end of winter to reduce dry<br />
mass. Allow to regrow in summer and spray regrowth late summer.<br />
Establish new pastures thereafter in autumn.<br />
Conventional: Mechanical plus chemical pasture renovation:<br />
Light Pressure: Prepare pasture seedbed. Allow perennial running grass<br />
and annual weeds to emerge. Apply ROUNDUP MAX ® at recommended<br />
rates for the weeds present (See Table 1). Sow new pasture 3 - 4 days<br />
after spraying.<br />
Heavy Pressure: Cultivate the weeds and allow regrowth to occur.<br />
Spray with the recommended ROUNDUP MAX ® rate. Allow 7 days after<br />
spraying.<br />
Pre-sowing weed control: New germinating annual weeds can be<br />
controlled with 0,5 - 1,5 Kg/ha. Cyperus spp requires 3,2 Kg/ha. Sow<br />
pasture 3 - 4 days after spraying.<br />
Pasture replacement and veld improvement: Reduce trash levels by<br />
mowing or heavy grazing 3 - 4 weeks prior to ROUNDUP MAX ®<br />
applications on regrowth. Drill the new pasture 3 - 4 days after spraying.<br />
Pasture maintenance: Control perennial and annual weed infestations in<br />
pastures by spot spraying with a 1,0% solution or using wipe-type<br />
equipment to weeds projecting above the pasture (See Table 6).<br />
TABLE 5<br />
PASTURE RENOVATION<br />
Perennial running grass infestation
Change language