02.05.2013 Views

MKS Implementer 2006 Administration Guide

MKS Implementer 2006 Administration Guide

MKS Implementer 2006 Administration Guide

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Implementer</strong> Conversion<br />

Control Properties<br />

Description<br />

Generating and Configuring the Conversion Properties File<br />

mks.implementer.dr.issue_type Defines the <strong>MKS</strong> Integrity issue type to use for DRs, for example,<br />

Defects.<br />

mks.implementer.sr.issue_type Defines the <strong>MKS</strong> Integrity issue type to use for SRs, for example,<br />

Features.<br />

Design Request and Service Request Field Conversion<br />

Properties and Definitions<br />

Referring to the table on page 448, the field definitions for the design request and service<br />

request conversion properties are as follows:<br />

mks.implementer.dr and mks.implementer.sr indicate whether this field is part of<br />

a design request or service request.<br />

intmgrfield is the <strong>MKS</strong> Integrity field to contain the converted DesignTracker data for<br />

a specific DesignTracker field.<br />

In the following example, the <strong>MKS</strong> Integrity field Priority contains the converted<br />

requester priority for a DR<br />

mks.implementer.dr.intmgrfield.requester_priority=Priority<br />

value is the value to assign in <strong>MKS</strong> Integrity that replaces the value in DesignTracker<br />

In the following example, the <strong>MKS</strong> Integrity field Priority uses the new values of High<br />

for A, Medium for B, and Low for C:<br />

mks.implementer.dr.value.requester_priority.A=High<br />

mks.implementer.dr.value.requester_priority.B=Medium<br />

mks.implementer.dr.value.requester_priority.C=Low<br />

NOTE<br />

The initial <strong>MKS</strong> Integrity field values specified in the conversion properties file<br />

come from the description of the value in DesignTracker. Alternately, you can<br />

edit the description in DesignTracker and recreate the conversion properties file.<br />

For more information, see the table on page 438.<br />

Any spaces in DesignTracker values automatically translate to an underscore “_”<br />

in the value entry. Because this file is built from master files, if any values used in<br />

the DesignTracker database are not listed in the master file, you need to add<br />

those values. If the values contain blanks, you must substitute an underscore for<br />

the blanks. Underscore values are not required when specifying the new<br />

<strong>MKS</strong> Integrity value.<br />

447

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!