MKS Implementer 2006 Administration Guide

Deactivating Standard Object Codes
PeopleSoft World Integration
You can deactivate any standard object codes not needed for PeopleSoft World special
environments.
To deactivate standard object codes for PeopleSoft World environments
1 From the Implementer Menu, type option 42, Environments, and press ENTER.
2 In the Opt field, type 2=Change, and press ENTER. The Change Environment panel
displays.
3 Press F8=Object Codes. The Change Environment Object Code Overrides panel displays.
4 In the Act Flg field, type N next to each object code to deactivate in the environment.
5 Press ENTER to save the changes.
Installing the Interface on Remote Systems
Implementer supports the distribution of PeopleSoft World soft coding items such as User
Defined Code, DreamWriters, and Member Masters to remote systems. This section pertains
to sending PeopleSoft World soft coding items to remote systems using the Implementer
Receiver.
The interface objects are shipped with Implementer in save file IMJDESAVF, which is
automatically installed when you install the Implementer Receiver. You must restore the
save file to the Implementer Receiver product library, MKSIR. After installing the
Implementer Receiver, perform the following tasks to configure the remote system.
To restore interface save file objects on a remote system
1 Sign on to the remote system as the system security officer.
2 Issue the following command:
RSTOBJ OBJ(*ALL)
SAVLIB(DSSII)
DEV(*SAVF)
SAVF(MKSIR/IMJDESAVF)
RSTLIB(MKSIR)
IMPORTANT On the Implementer Receiver, restore the interface objects into the
Implementer Receiver library MKSIR. If you changed the name of the Implementer
Receiver library, replace MKSIR with the new name.
Because any subsequent upgrades to the MKSIR library overwrite the restored save
file objects, when upgrading the Implementer Receiver you must perform these
tasks again to reinstall the interface objects.
361