MKS Implementer 2006 Administration Guide

To restore the interface save file objects
PeopleSoft World Integration
After installing Implementer, sign on to the system as the security officer and issue the
following command:
RSTOBJ OBJ(*ALL)
SAVLIB(DSSII)
DEV(*SAVF)
SAVF(MKSIM/IMJDESAVF)
RSTLIB(IMJDE)
IMPORTANT The IMJDE library must be on the system prior to restoring the save file
objects. If it does not exist, use the Create Library (CRTLIB) command to create it,
and then issue the Restore Object (RSTOBJ) command as indicated.
To apply the security codes for the host system
1 Add the Implementer PeopleSoft World interface library to your library list by issuing
the following command:
ADDLIBLE (IMJDE)
2 Type the RESETCOD command, and press F4 to prompt. The Reset Security Codes panel
displays.
In the Implementer library field, type the interface library name, IMJDE.
In the next four fields (Security Code #1 through Security Code #4) specify the
security codes for up to four iSeries systems. Type each code (provided with the
product media) in the appropriate field.
3 Press ENTER.
To define the MWIJOBD job description
Verify the following libraries exist in the MWIJOBD library list:
Implementer PeopleSoft World Interface library (IMJDE).
PeopleSoft World product libraries (JDFDATA and JDFOBJ).
IMPORTANT Your interactive library list must have the IMJDE library above the
PeopleSoft World product libraries.
To enable PeopleSoft World support in Implementer
In System Control Maintenance, set the PeopleSoft installed field to Y.
357