MKS Implementer 2006 Administration Guide

Environments
3 The values that display for each code default from the corresponding global object code
definition. Establish the overrides for this environment as follows:
In the Object Library, Source File, and Source Library fields, type the new value in
the appropriate field. The default value *NONE in any of these fields indicates the
field does not allow entry and must first be changed at the global level.
In the Act Flg field, type Y to activate the object code for the environment. The object
code must be active to check out or promote using the object code. Type N to
deactivate the object code.
In the Rmv Obj and Rmv Src fields, specify whether to delete the corresponding
object and/or source upon successful completion of a promotion request from this
environment. Specify Y to delete the item. Specify N to retain the item.
4 Press ENTER to process your changes. The Change Environment panel (or Create
Environment panel) displays.
To set up IFS directories for an environment
1 From the Work with Environments panel, type option 20=Directory setup next to the
environment and press ENTER. The Work with Environments Directory Setup panel
displays.
93