User Manual

11 12
13 14
15 16
17
19
18
11. Press either the + or – button to make an INITIAL DELAY
setting.
This setting controls the amount of time that elapses
before the first capture in the sequence.
12. Press to select DELAY.
13. Press either + or – to make a DELAY setting.
This setting controls the amount of time between each
capture in the sequence.
14. Press to select COUNT.
15. Press either + or – to make a COUNT setting.
This setting controls the number of captures in the
sequence.
16. Press OK to confirm all the settings.
17. The unit is now ready for a sequence start. Note that the
MENU/EXIT button now diplays START instead:
18. Press START to set the sequence running.
19. Note that the EXIT button now displays STOP. The sequence
can be stopped at any time by pressing this button and the
standard menu display returns.
76