User Manual
User Manual
User Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1 2<br />
3 4<br />
5 6<br />
1<br />
3<br />
ISO/WB<br />
ISO/WB<br />
Save<br />
2<br />
F<br />
55<br />
Language<br />
As a practical example, a MAIN MENU > SETTINGS > USER<br />
INTERFACE > Language item instruction would involve the following<br />
procedure:<br />
1. Making sure you feel confident to return to your choice of<br />
language by navigating in another, press the menu (MENU)<br />
button to open the menu.<br />
2. Use and to select the SETTINGS sub-menu.<br />
3. Press to open the SETTINGS menu.<br />
4. Press to select the USER INTERFACE sub-menu.<br />
5. Press either the zoom ( – or + ) button to choose a new language<br />
(in this case Spanish).<br />
6. Press the MENU/EXIT button again to close the menu.<br />
Note also that the menu and approval buttons are situated just<br />
outside the bottom-left and bottom-right corners of the screen.<br />
As you work through the various menu entries, the screen shows<br />
a label for each of these buttons. In the text, we therefore give the<br />
generic name for the button and the screen name. For example we<br />
will refer to: the menu (MENU) button, the menu (EXIT) button,<br />
or the approval (OK) button.<br />
Settings check<br />
ISO, White Balance, Media and Browse settings should be<br />
checked before each session. They are therefore placed at the top<br />
level of the menu for quick and easy access. They are also shown<br />
on-screen in most preview modes, so you can easily keep an eye<br />
on them as your work.<br />
ISO<br />
The ISO setting can be made using the ISO/WB button on the<br />
grip or on the digital capture unit. The “natural” sensitivity of the<br />
CCD is ISO 50 for H3DII 39/50 models and 100 ISO for H3DII<br />
31 models, so you will get best results with this setting if the light<br />
conditions allow.<br />
To set the ISO on the grip:<br />
The ISO/WB button provides immediate access to ISO settings.<br />
The front control wheel is used to make the desired changes. The<br />
settings are automatically and simultaneously transferred from the<br />
camera to the digital capture unit. Please note that the changes are<br />
only displayed on the digital capture unit unit when the settings<br />
have been saved.<br />
1) Press the ISO/WB button on the grip.<br />
2) To make an ISO setting, turn the front control wheel to<br />
choose between:<br />
50, 100, 200 and 400 (39 and 50 Mpix models)<br />
50, 100, 200, 400 and 800 (31 Mpix models)<br />
3) Press SAVE (ISO/WB button) to save the setting.