User Manual

8
Overview of viewing, deleting
and copying images
Basic image browsing
The large, full-colour display enables you to inspect your shots while you are still onlocation.
It offers full-screen previews, high-magnification zoom, two levels of thumbnails
and analysis tools including a full histogram and camera settings.
When you first turn on the camera, the display opens in standard browse mode, showing
the last image taken (if any) for the current medium and batch. Likewise, after each new
shot, the display shows a preview of the shot.
To browse the images of the current batch, simply press the left () and right () arrows
of the navigator button.
Choosing the current batch
When you browse using the navigator button, you will only see images from the current
batch on the current medium. To view another batch, you must navigate to it by zooming
out to the batch or media level and then zooming in on the appropriate folder. See
Navigating Media and Batches for complete details about how to select the current
medium and/or batch.
Browsing by approval status
It is possible to set the camera to browse only images of one or more specific approval
levels from the current batch. You can use this, for example, to review all of your redstatus
shots to make sure you don’t need them or to review all of your yellow-status shots
to decide whether they should be moved to green or red status. When you use the browse
filter, you will not see images excluded by the filter, but they are still there.
See Using Instant Approval Architecture for complete details about how to check and
set the browse filter.
Zooming in and out
As illustrated below, you can use the Zoom in/out button to see various levels of detail
in your images. You can furthermore zoom all the way out to view and select batches
and media.
– – – – –
+ + + + +
Media list Batch list 9-Thumbnail view 4-Thumbnail view Normal view Zoomed
Continue to press (+)
to zoom further
47