User Manual
User Manual
User Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1<br />
FLASH<br />
3 4<br />
5<br />
5<br />
R<br />
1 2<br />
3 4<br />
F<br />
R<br />
Red warning triangle and green LED flash<br />
symbol to left of viewfinder LCD display.<br />
2<br />
AF<br />
Clr<br />
F<br />
Example of viewfinder display showing<br />
Flash set to Rear sync as well as<br />
´- 1EV´ exposure compensation.<br />
FLASH<br />
ISO/WB<br />
Save<br />
110<br />
To access the controls:<br />
1) Activate the camera and press the FLASH button once.<br />
2) Turn the front control wheel to set the amount of compensation<br />
required:<br />
• from +3EV through -3EV<br />
• press Clr (AF button) to clear the setting quickly if required.<br />
3) Turn the rear control wheel to set:<br />
• normal sync (flash triggered just after the shutter opens)<br />
• rear sync (flash triggered just before the shutter closes)<br />
• flash measure (with non-TTL flash units or TTL units in<br />
<strong>Manual</strong> mode)<br />
4) The grip display shows the flash mode - Normal or Rear - in<br />
the standard display.<br />
5) When set to Flash Measure, a specific screen requests you to<br />
press the AE-L button in order to make a reading. See below<br />
for details.<br />
Integral flash<br />
The integral flash unit features the following specifications:<br />
Guide no. 12<br />
Coverage 56º horizontal, 44º vertical<br />
Maximum light fall-off at side centres - 1EV (50%)<br />
Colour temperature (full flash) 5,000 – 5,600º K<br />
To raise the flash unit into its operative position, slide the flash-unit<br />
catch backwards in the direction of the flash symbol. To return<br />
the flash unit into its closed position, push down on the top of the<br />
unit until it clicks back into place. The flash unit is automatically<br />
activated when it is in the operative position and de-activated when<br />
returned to its stored position.<br />
The green LED flash symbol blinks in the viewfinder when the<br />
flash unit is charging and remains stationary when fully charged.<br />
The flash output can also be adjusted for optimum light balance<br />
in fill-flash situations.<br />
Do not use the integral flash together when another external<br />
TTL flash unit is connected (and used in TTL or A mode)<br />
For full coverage with the integral flash, use 80 mm or longer<br />
lenses (without a lens shade).<br />
Using the integral flash:<br />
1) Slide the flash-unit catch backwards in the direction of the<br />
flash symbol.<br />
2) Press the FLASH button.<br />
3) Choose between Normal or Rear sync by turning the rear<br />
control wheel and the amount of compensation (if required)<br />
by turning the front control wheel.<br />
4) Press Save (ISO/WB ) button. Make an exposure.