Thermo Ramsey - Hoferick Engineering GmbH

Operation
2-42
When duration test is finished the new values for length of belt and time are
displayed. Press CONITNUE.
TEST DURATION
Length = 0000.0 Ft
Time = 000 sec
START ABORT
During the Acquire Test Duration, the Integrator performed an unassisted zero
calibration and installed the new zero. Skip to Step 19.
2.9.8 Manual Entry of Test Duration
This procedure allows direct entry of parameters that would otherwise be
generated by the acquire Test Duration modes. This menu is generally used
when the operator cannot see the belt while standing at the front panel.
If MANUAL is pressed, the system prompts the operator for running the belt at
its maximum speed. Then press CONTINUE
Pressing ABORT returns the screen to Cal Data Scroll 11.
Start Belt. Press
CONTINUE when belt
is at maximum speed.
ABORT CONTINUE
The operator is prompted to enter the length of one belt revolution.
Pressing ABORT returns the screen to Cal Data Scroll 11.
ENTER length of one
Belt revolution
Length 000.0 Ft
ENTER ABORT
If English Default: 200.0 Ft
or Mixed: Min: 1.0 Ft
Max: 10000.0 Ft
If Metric Default: 200.0 m
Min: 1.0 m
Max: 1000.0 m
The number of belt revolutions to be timed is than entered.
Pressing ABORT returns the screen to Cal Data Scroll 11.
Operation Thermo Fisher Scientific
REC 4175 Rev B