Thermo Ramsey - Hoferick Engineering GmbH

Thermo Fisher Scientific Operation
REC 4175 Rev B
Operation
2.9.7 Partial Test Duration Acquisition
If PARTIAL is pressed, the operator is asked to enter the length between two
marks on the belt.
Pressing ABORT returns the screen to Cal Data Scroll 11.
Enter length between
two marks on belt.
Length: 200.0 Ft
ENTER ABORT
If English Default: 200 Ft
or Mixed: Min: 1.0 Ft
Max: 10000.0 Ft
If Metric: Default: 50.0 m
Min: 0.5 m
Max: 3000.0 m
After the length of the belt has been entered, the system automatically moves to
the following screen, which prompts the operator to press START when the
mark passes the reference point.
The belt must be running at the maximum speed before executing this function.
If not, the prescaler is improperly calculated.
Pressing ABORT returns the screen to Cal Data Scroll 11.
Start belt. Press
START when 1 st mark
passes reference
START ABORT
When START is pressed above, the system automatically moves to the next
instructional screen. The operator presses COUNT each time a mark passes the
reference point until both marks have passed. Then press DONE.
Pressing ABORT returns the screen to Cal Data Scroll 11.
Zero Cal light illuminates indicating zero calibration in progress.
Press COUNT each
Time a mark passes.
00000 secs 000 revs
START ABORT
2-41