Thermo Ramsey - Hoferick Engineering GmbH

Operation
2-36
2.9.3 Defining the Load Cell(s)
Enter the load cell capacity as it appears on the label placed on the load cell.
-- SC DATA SCROLL -6-
Load cell capacity
250 Lbs
ENTER
If English Default: 250.0 Lbs
or Mixed: Min: 1 Lb
Max: 15000 Lbs
If Metric Default: 100 kg
Min: 1 kg
Max: 5000 kg
The sensitivity was entered when the belt scale code was entered. If other (0)
was selected, enter the load cell sensitivity in mV/V as marked on the label of
the load cell. Thermo Scientific load cells are normally 1.800 or 3.000 mV/V.
-- SC DATA SCROLL -7-
Load cell sens.
3.000 mV/V
ENTER
Default: 3.000 mV/V
Min: 0.500 mV/V
Max: 3.500 mV/V
Load cell resistance is entered on this screen. The resistance for the load cell
has been recorded on the System Data Sheet in the front of your belt scale
manual. (It is also stamped on the load cell cable.) Enter the ohms for the load
cell. The number of scrolls depends on the number of load cells specified in
scroll 3O.
-- SC DATA SCROLL –8A-
Load cell #1 res
350.000 Ohms
ENTER
Default: 350 Ohms
Min: 10 Ohms
Max: 2000 Ohms
• If # of Load Cells is more than 2:
Operation Thermo Fisher Scientific
REC 4175 Rev B