Thermo Ramsey - Hoferick Engineering GmbH

2.9 Defining Dimensional Parameters of the Application
Thermo Fisher Scientific Operation
REC 4175 Rev B
Operation
2.9.1 Idler Spacing in Scale Area
Parameter LD: Idler Spacing in Scale Area. For better accuracy, average the
distance between the idlers across the scale on both sides. Measure to within
0.032 inch or 1 mm with the numeric keys and press ENTER.
-- SC DATA SCROLL 4--
Idler spacing
36 In
ENTER
If English Default: 36.00 in
or Mixed: Min: 2.00 in
Max: 120.00 in
If Metric Default: 1000 mm
Min: 50 mm
Max: 2500 mm
2.9.2 Angle of Inclination
Enter the angle of inclination. If an inclination compensator is connected to the
scale, after this preliminary set up has been completed, enable the automatic
angle detection in I/O definition (Main Menu 4) and calibrate the incline
compensator.
-- SC DATA SCROLL -5-
Conveyor’s angle
0.0 Degrees
ENTER +/-
Default: 0.0
Min: -25.00
Max: +25.00
Note: Incline angles greater than 16° are not recommended and generally
restrict the system accuracy. Consult the factory on angles with installation
greater than 16°.
2-35