Thermo Ramsey - Hoferick Engineering GmbH

Operation
2-28
2.7.7 Max. Scale Capacity
The next entry is the scale capacity, which is the maximum rate at which the
scale is allowed to work. This entry also defines the default number of decimal
places that are used for displaying rate. Use numeric keys for entering the
number, confirm with ENTER. Scroll down.
-- SC DATA SCROLL 1 --
Max. scale capacity
500.0 Tph
ENTER
Default: 500.00
Min: 1
Max: 200000
2.7.8 Scale Divisions
When the Scale capacity is entered, the number of decimal places is also
defined. If, for example, the User enters 500.0, this sets the "Scale Divisions"
parameter to 0.1. Advancing to the next scroll, the User then sees first the Scale
Division corresponding to the just entered Scale Capacity (in the example 0.1).
If required, the User is able to alter the Scale Division to any of the available
options.
Press the ENTER soft key to accept the default divisions, or the CHOICES soft
key to scroll selections. Press ENTER to confirm your selection. Scroll down.
-- SC DATA SCROLL 2 --
Scale Divisions
> 0.1 <
CHOICE ENTER
Default: 0.1
Choice: 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50, 0.01, 0.02, 0.05, 0.001,
0.002, 0.005
Operation Thermo Fisher Scientific
REC 4175 Rev B