Thermo Ramsey - Hoferick Engineering GmbH

Operation
2-26
Note: If the Measure units are changed from English to Metric (or vice versa)
after the scale is calibrated, the span number changes but the calibration remains
the same.
2.7.3 Totalization Units
The units to be used for Totalization are selected here. Press ENTER soft key to
accept the default unit, or CHOICES soft key to scroll selections. Press ENTER
to confirm your selection. Scroll down.
-- DISPLAY SCROLL 2 --
Totalization Units
> Tons <
CHOICE ENTER
English/Mixed Metric If Mixed
Default: Tons Default: tones Default: Tons
Choices: Tons, Ltons, Pounds Choices: tones, kg Choices: Tons,
Ltons, kg, Pounds,
tonnes
2.7.4 Length Units
Units used for parameters expressed in length are selected here. Selections are
only available if MIXED units are in use. Press ENTER soft key to accept the
default unit, or CHOICES soft key to scroll selections. Press ENTER to
confirm your selection. Scroll down.
-- DISPLAY SCROLL 3 --
Length Units
> feet <
CHOICE ENTER
English/Mixed Metric If Mixed
Default: Feet Default: Meters Default: Feet
Choices: Feet, Meters
Operation Thermo Fisher Scientific
REC 4175 Rev B