Thermo Ramsey - Hoferick Engineering GmbH

Operation
2.7 Programming the Micro-Tech 3101 (Initial Setup)
2-24
When power is first applied to the Integrator, the system steps the operator
through menus and options that bring the system to a weighing state. Soft keys,
numeric keys, and the scroll control keys are used to select choices. The RUN
and MENU control keys are inactive during this procedure.
CAUTION
VERIFY 115/230 VOLT SELECTION IS CORRECT.
IMPROPER CONNECTION MAY RESULT IN DAMAGE TO YOUR
INTEGRATOR.
• Turn the belt scale conveyor belt on. Run the conveyor empty during setup
and calibration.
• The programming mode begins the first time power is applied. Information
requested by the instructional screens should be entered before moving to
the next screen. The belt scale is calibrated at the end of this procedure
provided the correct information is entered. The alarm light flashes during
the programming procedure and clears when calibration is complete.
The programming mode begins with the following instructional screens.
-- MEMORY ERASED --
Chose the language
key to continue to
ESP USA
2.7.1 Language
The Micro-Tech 3101 is a dual language instrument. USA is always the
first language. The standard configuration profides Spanish (ESP) as the
second language. Other languages, such as German (GER), are available
upon request (consult factory). Press the desired language.
Initial scale setup
and calibration
Press down SCROLL.
Press the DOWN SCROLL key.
Operation Thermo Fisher Scientific
REC 4175 Rev B