Thermo Ramsey - Hoferick Engineering GmbH

Thermo Fisher Scientific Operation
REC 4175 Rev B
Operation
2.6.1.3.4 Pivot to 2nd Weigh Idler (Optional)
As indicated in Figure 2-11, measure the distance from the pivot centerline to
the second weigh idler’s centerline to the nearest 0.032 (1/32”). Record the
distance below.
(Pivot to 2 nd Weigh Idler Distance)
(Model 10-22 belt scale, 10-17-2 similar.)
Figure 2-11: Pivot to 2nd Weigh Idler
Note: Up to six (6) weigh idlers on a single weighbridge may be entered during
programming. Measure and record the same as Section 2.6.1.3.4 for each
additional weigh idler.
2.6.1.3.5 Pivot to 1 st , 2 nd , 3 rd and 4 th Weigh Idler
As indicated in Figure 2-12, measure the distance from the pivot centerline to
the weigh idler’s centerline to the nearest 0.032 (1/32”). Record the distance
below.
(Pivot to Weigh Idler Distance)
Figure 2-12: Pivot to 1st, 2nd, 3rd, and 4th Weigh Idler
2.6.1.4 Calibration Using Test Weights
Complete the steps in Sections 2.6.1.4.1, 2.6.1.4.2, 2.6.1.4.3, and 2.6.1.4.4
below only if test weights are used for calibration.
2-19