Thermo Ramsey - Hoferick Engineering GmbH

Menus
- AUDIT TRAILS 1 -
Audit trails
NO
CHOICE ENTER
Default: No
Selections: Yes, No
If the audit trails are enabled, meaning YES is selected, the following screen
appears for a short time (3 seconds):
- AUDIT TRAILS -
Use scroll keys or
enter trail number
After 3 seconds, the next screen is shown:
TRAIL EVENT No. 0000
hh:mm dd-mm-yyyy
nnnnnn = vvvvvvv/N
nnnnnn = vvvvvvv/O
Password: Service
hh:mm Time of change
dd-mm-yyyy Date of change
nnnnnn Parameter's name
vvvvvv Parameter's values, after change new (N) and before
change old (O)
A.13.2.
Time and date are shown only if an optional Communication board is installed.
The user can scroll between events, which are displayed in order of date, and
time. The user can also enter a number to display a specific event.
Linearization
Linearization is not normally used with conveyor belt scales. In case of extreme
instances where calibration at multiple flow rates may be required, please
consult the factory.
A-82 Weighbridge Physical Parameters Thermo Fisher Scientific
REC 4175 Rev B