Thermo Ramsey - Hoferick Engineering GmbH

Menus
A.12.5. The PRINT Key
The PRINT key enables the printer to print data.
The following screen is displayed:
- PRINTER SCROLL 9P-
Position running tm
X = 0 , Y = 0
ENTER X-Pos Y-Pos
The second line gives the status of the printer:
NO DATA Indicates the printer is idle, no data are being sent to
the printer.
IS RUNNING The system is sending data to the printer.
The third line indicates what kind of data is printed if the PRINT key is pressed.
The UP and DOWN keys select between:
TOTALS Print totals.
BATCH Only if load out option is active, print load out
information.
SETUP Print the setup data of the instrument.
TRAILS If audit trails option is active, audit trail data is printed
Print starts after the PRINT key is pressed.
The COM key allows the operator to select the printer in case more than one is
installed.
Here are some examples of data that can be printed:
Print TOTALS
TOTALS REPORT
DATE: 01-22-2003
TIME: 8:12a
MASTER TOTAL: 0.00 Tons
RESET TOTAL: 0.00 Tons
OPERATOR TOTAL: 0.00 Tons
RATE: 0.00 Tph
Print BATCH:
BATCH REPORT
DATE: 01-22-2003
Password: Not required
Thermo Fisher Scientific Weighbridge Physical Parameters A-79
REC 4175 Rev B