Thermo Ramsey - Hoferick Engineering GmbH

Menus
A.12. MAIN MENU 5
Main Menu 5 is dedicated to the serial option. COMM A is used to set up the
serial line and PRINT is used for setting up the printer output. Main Menu 5
does not appear unless an optional COMM A is installed.
A.12.1. Communication A Scroll
The MT 3101 has one serial channel, which can be configured using jumpers as
an RS232 or an RS485 channel. The serial channel can be used for printing or
for a serial communication with an intelligent device such as a PLC or a PC. An
additional COMM A board can be installed and programmed, typically one for
the printer and one for networking.
The following screens define the communication parameters for the first and the
second channel.
COMM A SCROLL
Baud Rate port #1
Password: Service
> 9600 <
CHOICE ENTER
Default: 9600
Selections: 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200
- COMM. A SCROLL 2 -
Set parity port #1
> No parity <
CHOICE ENTER
Default: NO PARITY
Selections: EVEN PARITY, ODD PARITY, NO PARITY
- COMM. A SCROLL 3 -
Stop bits port #1
> 1 stop bit <
CHOICE ENTER
Default: 1 STOP BIT
Selections: 1 STOP BIT, 2 STOP BITS
Password: Service
Password: Service
A-66 Weighbridge Physical Parameters Thermo Fisher Scientific
REC 4175 Rev B