Thermo Ramsey - Hoferick Engineering GmbH

Menus
A.11.1. Define Rate Alarm
Use the CHOICE key to turn on or off the rate alarm. Confirm with ENTER.
Default: NO
Selections: YES, NO
If the selection in the previous screen was YES, enter the low and high set points
for the alarm. Also, enter the desired delay time before the alarm is monitored.
The UNITS key allows the user to specify the set points in engineering units.
The % key selects set points in percent. The SET/DLY switches between the set
point and the delay time.
Default: 10% 10 sec
Min: 0 % 0 sec
Max: 105 % 90 sec
Default: 10 % 10 sec
Min: 0 % 0 sec
Max: 150 % 90 sec
A.11.2. Define Load Alarm
Use the CHOICE key to turn on or off the belt loading alarm. Confirm with
ENTER.
Default: NO
Selections: YES, NO
- ALARM SCROLL 1 -
Rate alarm
YES NO
- ALARM SCROLL 1A -
Low rate set
10 % 105 sec
ENTER SET/DELAY UNITS/%
- ALARM SCROLL 1B -
High rate set
100 % 10 sec
ENTER SET/DELAY UNITS/%
- ALARM SCROLL 2 -
Load Alarm
> NO <
CHOICE ENTER
Password: Operator
Password: Operator
Password: Operator
Password: Operator
Thermo Fisher Scientific Weighbridge Physical Parameters A-63
REC 4175 Rev B