Thermo Ramsey - Hoferick Engineering GmbH

Menus
ENTER the number of
belt revolutions to
be timed 000 revs
ENTER ABORT
Default: 1
Min: 1
Max: 100
The next entry is the time per revolution.
Pressing ABORT returns the screen to CAL DATA SCROLL 11.
ENTER the time for
revolutions to pass
reference 000 sec
ENTER ABORT
Default: 30 sec
Min: 1 sec
Max: 16200 sec
When ENTER is pressed, the system times the belt travel according to the
above entered parameters.
Pressing ABORT returns the screen to CAL DATA SCROLL 11.
Timing belt travel
000 sec
ABORT
When test duration test is finished, the new values for length of belt and time are
displayed. Press CONTINUE
A.7.8. Defining Auto Zero Tracking
A periodic auto zero procedure can be automatically executed by the system if
the Auto Zero Tracking option is set to YES. If YES is selected, Auto Zero
Tracking is enabled anytime the belt is running at a flow rate less than the range
setting selected below.
-- CAL DATA SCROLL 12--
Auto zero tracking
> Yes <
ACQ MANUAL
Default: NO
Selections: YES, NO
Password: Operator
A-36 Weighbridge Physical Parameters Thermo Fisher Scientific
REC 4175 Rev B