Thermo Ramsey - Hoferick Engineering GmbH

Menus
A.6.5.2 Angle of Inclination
Enter the angle of inclination. If an inclination meter is connected to the scale,
after this preliminary set up has been completed, enable the automatic angle
detection in I/O DEFINITION (MENU 4) and calibrate the angle meter.
Default: 0.0
Min: -25.00°
Max: +25.00°
A.6.6. Defining the Load Cell(s)
A.6.6.1 Load Cell Capacity
Enter the load cell capacity as it appears on the label placed on the load cell.
English/Mixed Metric
Default: 250.0 Lbs Default: 100 kg
Min: 1 Lbs Min: 1 kg
Max: 15000 Lbs Max: 5000 kg
A.6.6.2 Load Cell Sensitivity
The sensitivity was entered when the belt scale code was entered. If other (0)
was selected, enter the load cell sensitivity in mV/V as marked on the label of
the load cell. Thermo Scientific load cells are normally 2.000 or 3.000 mV/V.
Default: 3.0 mV/V
Min: 0.500 mV/V
Max: 3.500 mV/V
-- SC DATA SCROLL 5 --
Conveyor’s angle
0 0 Degrees
ENTER +/-
-- SC DATA SCROLL 6 --
Load cell capacity
250 Lbs
ENTER
-- SC DATA SCROLL 7 --
Load cell sens.
3.00 mV/V
ENTER
Password:
Service
Password:
Service
Password:
Service
A-26 Weighbridge Physical Parameters Thermo Fisher Scientific
REC 4175 Rev B