Thermo Ramsey - Hoferick Engineering GmbH

Menus
Number of Weigh Idlers (Parameter LB1)
The number of weigh idlers affixed to the scale weighbridge. Use the numeric
keys to enter the number of weigh idlers and documented in Section 2.6.1.3.2,
press ENTER.
-- SC DATA SCROLL 3B --
# of weigh idlers
ENTER
Default: 1
Min: 1
Max: 6
Pivot to First Weigh Idler Distance (Parameter LB1)
Measure the distance between the pivot centerline and first weigh idler
centerline. Use the numeric keys to enter the distance 0.032 inch (1/32”)
(1mm). (Refer to Section 2.6.1.3.3.)
For weighbridges without a pivot, enter zero (0). Press ENTER
-- SC DATA SCROLL 3C --
Pivot to first idler
distance In
ENTER
English/Mixed Metric
Default: 24 in Default: 800 mm
Min: 0.00 in Min: 0 mm
Max: 100.00 in Max: 2500 mm
If the number of weigh idlers entered in Scroll 3B is more than one, the
following screens are displayed. Measure the distance between the pivot
centerline and the first weigh idler grease fitting. Enter the distance (within
0.032 inch or 1 mm). For weighbridges, which do not have a pivot, enter zero.
Only if # of weigh idlers ≥ 2
-- SC DATA SCROLL 3D --
Pivot to 2nd idler
distance 000.00 In
ENTER
Password:
Service
English/Mixed Metric
Default: 0.00 in Default: 800 mm
Min: 0.00 in Min: 0 mm
Max: 100.00 in Max: 2500 mm
A-22 Weighbridge Physical Parameters Thermo Fisher Scientific
REC 4175 Rev B