Thermo Ramsey - Hoferick Engineering GmbH

Menus
-- SC DATA SCROLL 3 --
Belt scale code #
>1<
CHOICE DETAIL
Default: 1
Min: 0
Max: 500
Press ENTER to accept the displayed selection (refer Appendix B, Thermo
Scientific Weighbridge Physical Parameters.).
Note: If the default is used, the scrolls from 3A to 3J are not displayed.
Press DETAIL if you want to force the following scrolls to be displayed even if
the default was chosen.
• 3A – 30
Enter 0 if you want to define the weighbridge not using the database. This
should only be done for special weighbridges that are not part of the standard set
of Thermo Scientific scales. Entering 0 forces the following menus to be
displayed:
A.6.4. Detailing the Mechanical Parameters of the Frame
These menus only display if OTHER or DETAIL was selected in Section A.4.23.
Pivot to Load Cell Distance (Parameter LA)
The distance from the pivot to load cell should be measured to within 0.032 inch
(1/32”) (1mm). Using the numeric keys enter the distance recorded in Section
2.6.1.3.1 and press ENTER.
For weighbridges, which do not have a pivot, enter zero (0).
-- SC DATA SCROLL 3A --
Pivot to load cell
distance: IN
ENTER
English/Mixed Metric
Default: 32 in Default: 1000 mm
Min: 0.00 in Min: 0 mm
Max: 150.00 in Max: 3800 mm
Thermo Fisher Scientific Weighbridge Physical Parameters A-21
REC 4175 Rev B