Thermo Ramsey - Hoferick Engineering GmbH

Menus
A.6. Scale Data
Refer to Section 2.6 and Appendix B Weighbridge Physical Parameters.
A.6.1. Scale Capacity
Scale capacity is the maximum rate at which the scale is allowed to work. This
entry also defines the default number of decimal places used for displaying rate.
Use the NUMERIC keys for entering the number. Confirm with ENTER; scroll
DOWN.
-- SC DATA SCROLL 1 --
Max. scale capacity
500.0 TPH
CHOICE ENTER
Default: 500.0
Min: 1
Max: 200000
A.6.2. Scale Divisions
When the SCALE CAPACITY is entered, the number of decimal places is also
defined. For example, the user enters 500.0; this sets the SCALE DIVISIONS
parameter to 0.1.
At the SCALE DIVISIONS menu, the displayed SCALE DIVISION
corresponds to the just entered SCALE CAPACITY. The user can change the
pre-set SCALE DIVISIONS by pressing CHOICES.
-- SC DATA SCROLL 2 --
Scale divisions
>0.1<
CHOICE ENTER
Default: 0.1
Choices: 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50, 0.01, 0.02, 0.05, 0.001, 0.002,
0.005
Make your choice and press ENTER to save the choice.
A.6.3. Selecting the Weighbridge Model
By entering the code number of your Thermo Scientific scale, the Integrator
automatically calculates parameters of the system such as number of load cells
and number of weigh idlers. (Refer to Appendix B for further information
regarding specific weighbridges.)
This menu items is also used for internal calibration calculations. The default
model number is 1, which corresponds to belt scale model 10-20-1.
A-20 Weighbridge Physical Parameters Thermo Fisher Scientific
REC 4175 Rev B