Thermo Ramsey - Hoferick Engineering GmbH

Replacement Parts
4.7.1 No Password Installed
1. If there is no password installed, select MAIN MENU 3
2. Press DIAG soft key and scroll down to the SRVICE PASSWORD screen.
3. Type in a password (example: 123) and press ENTER
4. Re-enter the password and press ENTER
5. Select MAIN MENU 3
6. Select PROT scroll, press PROT
7. Press NONE
8. Enter the password 7832500 and press ENTER. The protection level should
be RAMSEY.
9. Press TOTAL; scroll up or down if needed to reach the MASTER TOTAL
screen.
10. Press RESET and select YES to “Reset Master Total?”
11. Select MAIN MENU 3. Press DIAG and scroll to SERVICE
PASSWORD.
12. Press ENTER twice, erasing the password installed in Step 3.
13. Press RUN to return to normal operation.
4.7.2 Active Password
1. Select MAIN MENU 3
2. Select PROT scroll, press PROT
3. Press NONE
4. Enter the password 7832500 and press ENTER. The protection level should
be RAMSEY.
5. Press TOTAL; scroll up or down if needed to reach the MASTER TOTAL
screen.
6. Press RESET and select YES to “Reset Master Total?”
7. Select MAIN MENU 3
8. Press PROT and choose the password level desired.
4.8 Removing a Forgotten Password
Use the following steps to remove a forgotten password from Integrator
memory.
1. Select MAIN MENU 3
2. Select the PROTECT scroll and press PROT
3. Press NONE
4. Enter the password 7832500 and press ENTER. The protection level should
be RAMSEY.
5. Press NONE
6. Select MAIN MENU 3
7. Press DIAG and scroll to SERVICE PASSWORD
Thermo Fisher Scientific Replacement Parts
REC 4175 Rev B
4-9