1. Problems during the application 1.1 Fluidisation ... - BASF Coatings

More documents

Recommendations

Info

Problems during the application 1.6. On objects with corners and recesses (powder coating material is blown off) Detection Possible causes Remedy Parts of the object remain uncoated Hose material unsuitable Wrong gun attachment Feed fair speed in gun too high Geometry of object or suspension unfavourable for coating Use suitable hose material Use suitable gun attachment Reduce feeding fair speed Change object design and/or suspension
for TRIBO application Detection Possible causes Remedy See above Insufficient charging due to: • Excessive powder flow rate • Wrong grain size distribution • Worn detectors in gun Permanently measure leakage current or specific TRIBO charging of powder coating material
Page 1 and 2: 1. Problems during the application
Page 3 and 4: Problems during the application 1.3
Page 5: Problems during the application 1.5
Page 9 and 10: Problems during the application 1.8
Page 11: Problems during the application 1.1

1. Problems during the application 1.1 Fluidisation ... - BASF Coatings

Create successful ePaper yourself

Delete template?

Save as template?