TEST INSTRUCTIONS - Geotech Environmental Equipment
TEST INSTRUCTIONS - Geotech Environmental Equipment
TEST INSTRUCTIONS - Geotech Environmental Equipment
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PROCEDURE<br />
1. Press and hold ON button until colorimeter turns on.<br />
2. Press ENTER to start.<br />
3. Press ENTER to select <strong>TEST</strong>ING MENU.<br />
4. Select ALL <strong>TEST</strong>S (or another sequence containing 29 Copper<br />
BCA-LR)from<strong>TEST</strong>ING MENU.<br />
5. Scroll to and select 29 Copper BCA-LR from menu.<br />
6. Rinse a clean tube (0290) with sample water. Fill to the 10 mL line with<br />
sample.<br />
7. Insert tube into chamber, close lid and select SCAN BLANK.<br />
8. Remove tube from colorimeter and add one *Copper Tablet (T-3808).<br />
Cap and shake vigorously until tablet dissolves. Solution will turn purple if<br />
copper is present. Wait 2 minutes.<br />
9. At end of 2 minute waiting period, mix, insert tube into chamber, close lid<br />
and select SCAN SAMPLE. Record result.<br />
10. Press OFF button to turn colorimeter off or press EXIT button to exit to a<br />
previous menu or make another menu selection.<br />
Copper–LR 2/2 Smart2 <strong>TEST</strong> PROCEDURES 2.04
Change language