TEST INSTRUCTIONS - Geotech Environmental Equipment
TEST INSTRUCTIONS - Geotech Environmental Equipment
TEST INSTRUCTIONS - Geotech Environmental Equipment
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PROCEDURE<br />
1. Press and hold ON burton until colorimeter turns on.<br />
2. Press ENTER to start.<br />
3. Press ENTER to select <strong>TEST</strong>ING MENU.<br />
4. Select ALL <strong>TEST</strong>S (or another sequence containing 28 Color)from<br />
<strong>TEST</strong>ING MENU.<br />
5. Scroll to and select 28 Color from menu.<br />
6. Rinse a tube (0290) with color-free water (distilled or deionized water).<br />
Fill to 10 mL line with color-free water.<br />
7. Insert the tube into chamber, close lid and select SCAN BLANK.<br />
8. Remove tube from colorimeter. Empty tube.<br />
9. Rinse tube with sample water. Fill to 10 mL line with water sample.<br />
10. Insert tube with sample water, close lid and select SCAN SAMPLE. Record<br />
result in color units.<br />
11. Press OFF button to turn the colorimeter off or press EXIT button to exit<br />
to a previous menu or make another menu selection.<br />
Color 2/2 Smart2 <strong>TEST</strong> PROCEDURES 2.04
Change language