Firestop Products for Construction Joints Applications - RH Keleher ...
Firestop Products for Construction Joints Applications - RH Keleher ...
Firestop Products for Construction Joints Applications - RH Keleher ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Firestop</strong> <strong>Products</strong> <strong>for</strong><br />
<strong>Construction</strong> <strong>Joints</strong> <strong>Applications</strong><br />
The industry’s most complete line of firestop products<br />
and systems <strong>for</strong> head-of-wall, curtain wall, and general<br />
construction joints applications<br />
www.stifirestop.com
<strong>Firestop</strong>ping <strong>Construction</strong> <strong>Joints</strong><br />
Virtually all linear openings in buildings are referred to as joints. Although joints are<br />
found in many areas of construction, clearly they are not all alike. Additionally, test<br />
methods, test apparatus, and codes can confuse even experienced specifiers,<br />
installers, or inspectors. As a recognized leader in this area, STI offers more than just<br />
products. We are the knowledge resource. This Product and Application Guide provides<br />
complete solutions to seal these critical areas safely and economically.<br />
Static vs Dynamic<br />
The word joint often implies movement. Accordingly, some gaps are created to allow<br />
expansion and contraction, or compression and deflection of structural members.<br />
Events such as seismic, wind sway and vertical shear, as well as temperature changes<br />
are also factors that dictate dynamic joint systems. Conversely, static joint systems<br />
are designed <strong>for</strong> openings that will see little to no appreciable movement. In most<br />
cases, these openings simply represent a line of demarcation between two building<br />
surfaces or conditions.<br />
<strong>Construction</strong> <strong>Joints</strong> – Three Basic Types:<br />
• Head-of-Wall or Top of Wall (HOW)<br />
• Curtain Wall (CW)<br />
• General <strong>Construction</strong> <strong>Joints</strong> such as Floor to Floor (FF), Floor to Wall (FW) and<br />
Wall to Wall (WW)<br />
Choosing the Right <strong>Construction</strong> Joint <strong>Firestop</strong> Product<br />
Applies to both static and dynamic joints.<br />
<strong>Construction</strong> Joint Width<br />
Joint Type Narrow Wide<br />
HOW ES Sealant AS Spray<br />
PENSIL ® Sealant<br />
CW ES Sealant AS Spray<br />
PENSIL ® Self-Leveling Sealant Fast Tack Spray<br />
PENSIL ® Self-Leveling Sealant<br />
FF ES Sealant AS Spray<br />
FW PENSIL ® Sealant<br />
WW
Innovative Solutions <strong>for</strong> <strong>Firestop</strong>ping<br />
<strong>Construction</strong> <strong>Joints</strong><br />
Knowledge, Technology, Systems<br />
STI has the most UL ® Classified head-of-wall, curtain wall, and general<br />
construction joints systems <strong>for</strong> static and dynamic applications. User<br />
driven products and designs provide the correct tested system <strong>for</strong> your<br />
application. While some manufacturers rely on risky engineering judgements,<br />
STI offers tested solutions!<br />
Head-of-Wall<br />
STI’s head-of-wall package is second to none! From routine to “out of<br />
the ordinary” conditions that seem to appear on almost every project,<br />
STI has you covered. Fireproofed beams, fireproofing in flutes and<br />
conduits through the head-of-wall are just a few of the exceptional systems<br />
in our extensive head-of-wall package.<br />
SpecSeal ® AS Spray SpecSeal ® ES Sealant<br />
Curtain Wall<br />
The industry’s most complete curtain wall UL Classified system base,<br />
featuring tubular mullion, I-mullion, steel stud, and pre-cast configurations.<br />
Our systems provide specifiers and installers with the most<br />
choices, such as multiple mineral wool manufacturers and several<br />
SpecSeal ® firestop sealants to choose from depending on the application<br />
and field condition.<br />
SpecSeal ® AS Spray<br />
PENSIL ® Sealant<br />
SpecSeal ® Fast Tack <strong>Firestop</strong> Spray<br />
General <strong>Construction</strong> <strong>Joints</strong><br />
STI offers sealant, spray and self-leveling sealant systems to accommodate<br />
the many variations found in floor-to-floor, floor-to-wall, and wallto-wall<br />
joints. Our efficient spray systems save labor and are the<br />
installers’ choice <strong>for</strong> larger and hard-to-access joints.<br />
SpecSeal ® ES Sealant SpecSeal ® AS Spray<br />
PENSIL ® Sealant<br />
Engineering Support<br />
STI firestop products and systems are backed by our renowned engineering<br />
and technical support teams. It’s your assurance of a costeffective,<br />
code compliant, correct solution.<br />
1<br />
<strong>Firestop</strong> <strong>Products</strong><br />
and Systems<br />
Engineered in the industry’s most<br />
intensive, research, development,<br />
and testing program.<br />
SpecSeal ® AS Spray<br />
SpecSeal ® ES Sealant<br />
Fast Tack Spray<br />
PENSIL® Sealant<br />
1-800-992-1180
SpecSeal ® Series AS Elastomeric<br />
Spray<br />
www.stifirestop.com<br />
SpecSeal ® Series AS Elastomeric Spray<br />
The Professional’s Choice For Spray-Applied<br />
<strong>Firestop</strong> Protection of <strong>Joints</strong> and Penetrations<br />
The <strong>Firestop</strong> Spray that Hangs Tough!<br />
SpecSeal ® Series AS elastomeric spray is<br />
a non-halogenated, latex-based, highly<br />
elastomeric spray coating designed to<br />
provide passive smoke and fire protection<br />
in curtain wall, head of wall, and<br />
general construction joint applications.<br />
Its unique user driven <strong>for</strong>mulation provides<br />
exceptional non-sag characteristics<br />
<strong>for</strong> head of wall and overhead spray<br />
applications.<br />
Highly Flexible, Acoustically Tested<br />
AS elastomeric spray has been tested in<br />
both static and dynamic applications.<br />
AS spray is also engineered to restore<br />
sound attenuation properties to acoustically<br />
rated ceilings and partitions.<br />
Please contact the factory <strong>for</strong> individual<br />
designs and application requirements.<br />
Large System Base<br />
SpecSeal ® Series AS Elastomeric Spray is tested and approved <strong>for</strong> use on<br />
a broad range of construction joint systems. A wide variety of curtain<br />
wall, head of wall, and general construction joint systems addressing both<br />
common and unique specialty applications feature all major mineral wool<br />
manufacturers and have been successfully tested in one, two, three, and<br />
four hour joints.<br />
Water Based <strong>for</strong> Easy Installation, Touch Ups and Cleanup<br />
SpecSeal ® Series AS Elastomeric Spray is engineered to adhere to virtually<br />
all construction surfaces and may be applied using standard industrial<br />
spray equipment. It has excellent auto bonding characteristics <strong>for</strong> easy<br />
touch ups using a brush or spray, and is fully compatible with ES caulk.<br />
Cleanup is simple using soap and water.<br />
UL ® Classified and FM Approved<br />
A wide variety of user driven systems have been UL ® Classified and<br />
FM Approved.<br />
Product<br />
AS205<br />
Refer to product data sheet <strong>for</strong> physical properties.<br />
2<br />
Features<br />
• Acoustically tested: reduces<br />
sound transmission.<br />
• ES sealant compatible <strong>for</strong><br />
versatility in application<br />
or repair.<br />
• Auto bonding.<br />
• Water-resistant: will not reemulsify<br />
when dry.<br />
• Low abrasion: longer pump<br />
life with less maintenance.<br />
• Low VOCs: safe. No solvents.<br />
Non-halogenated.<br />
• UL ® Classified and FM<br />
Approved.<br />
• Tested with direct applied<br />
fireproofing.
SpecSeal ® Series ES Elastomeric<br />
Sealant<br />
A Great <strong>Firestop</strong> Caulking Product that Remains<br />
Flexible, and Reduces Sound Transfer<br />
SpecSeal ® Series ES elastomeric<br />
sealant is a non-halogenated, highly<br />
elastomeric caulk designed to provide<br />
passive smoke and fire protection in<br />
construction joints while maintaining<br />
acoustical properties.<br />
Highly Flexible, Acoustically Tested<br />
All tested systems have been cycled<br />
500 times with total movement of up<br />
to 50%. ES sealant is also engineered<br />
to restore sound attenuation properties<br />
to acoustically rated ceilings and<br />
partitions. Please contact the factory<br />
<strong>for</strong> individual designs and application<br />
requirements.<br />
Large System Base<br />
SpecSeal ® Series ES Elastomeric Sealant is tested and approved <strong>for</strong> use<br />
on a broad range of construction joint systems. It has been successfully<br />
tested in one, two, three and four hour joints when tested in accordance<br />
with UL 2079 (ASTM E1966).<br />
Water Based <strong>for</strong> Easy Installation, Touch Ups and Cleanup<br />
SpecSeal ® Series ES Elastomeric Sealant is engineered to adhere to virtually<br />
all construction surfaces and may be applied using standard caulking<br />
equipment or by troweling. It has excellent auto bonding characteristics<br />
<strong>for</strong> easy touch ups and is fully compatible with SpecSeal ® Series AS<br />
Spray. Cleanup is simple using soap and water.<br />
UL ® Classified and FM Approved<br />
A wide variety of user driven systems have been UL ® Classified and<br />
FM Approved.<br />
<strong>Products</strong><br />
ES100, ES105, ES120, ES129.<br />
Features<br />
Refer to product data sheet <strong>for</strong> physical properties.<br />
• Water-based <strong>for</strong> easy installation<br />
and cleanup.<br />
• Acoustically tested: reduces<br />
sound transmission.<br />
• AS Spray compatible <strong>for</strong><br />
versatility in application or<br />
repair.<br />
• Auto bonding: good retro-fit<br />
adhesion<br />
• Water-resistant: will not reemulsify<br />
when dry.<br />
• Low VOCs: safe. No solvents.<br />
Non-halogenated.<br />
• UL ® Classified.<br />
3<br />
SpecSeal ® Series ES Elastomeric<br />
Sealant<br />
1-800-992-1180
SpecSeal ® Series FT Fast Tack<br />
<strong>Firestop</strong> Spray<br />
www.stifirestop.com<br />
SpecSeal ® Series FT Fast Tack<br />
<strong>Firestop</strong> Spray<br />
The Curtain Wall <strong>Firestop</strong> Spray That Does What<br />
Others Cannot!<br />
Tough, Water-Resistant, Flexible<br />
Shield Against Fire and Smoke<br />
SpecSeal ® Fast Tack <strong>Firestop</strong> Spray is<br />
an elastomeric single component silicone/urethane<br />
hybrid spray coating<br />
designed to provide passive smoke<br />
and fire protection in construction<br />
joints.<br />
Skins Over Quickly to Resist Water<br />
Traditional water-based sprays can take<br />
days to dry. SpecSeal ® Fast Tack<br />
<strong>Firestop</strong> Spray skins over and is capable<br />
of direct water contact within 45<br />
minutes of installation.<br />
Cures in Cold Temperatures<br />
Unlike water-based sprays, Specseal ® Fast Tack <strong>Firestop</strong> Spray cures at<br />
temperatures as low as 20°F(-10°C). Fast Tack cures in the presence of<br />
atmospheric moisture to <strong>for</strong>m a durable, flexible, water-resistant shield<br />
against the propogation of fire, smoke and combustion byproducts.<br />
Excessive water or extreme cold may affect cure times. Contact STI<br />
Application Engineering <strong>for</strong> additional in<strong>for</strong>mation.<br />
Can be Top Coated<br />
Like AS205 spray, Fast Tack has excellent auto bonding characteristics<br />
<strong>for</strong> easy touch-ups!<br />
UL ® Classified<br />
SpecSeal ® Fast Tack Spray has been successfully tested to the exacting<br />
criteria of ASTM E 1966, ANSI/UL2079, ASTM E 1399 and to the timetemperature<br />
requirements of ASTM E 119 (ANSI/UL 263) in one, two<br />
and three hour rated joint and perimeter fire containment systems.<br />
<strong>Applications</strong><br />
SpecSeal ® Fast Tack <strong>Firestop</strong> Spray is designed primarily <strong>for</strong> the<br />
protection of construction joints and excels in curtain wall safing gap<br />
conditions.<br />
Product<br />
FT305<br />
4<br />
Features<br />
• All weather <strong>for</strong>mula<br />
• Tack Free in 2-4 hours<br />
• Skins over quickly to resist<br />
water<br />
• Apply in low temperatures<br />
• Unique spray or self leveling<br />
<strong>for</strong>mula<br />
• Auto Bonds <strong>for</strong> easy,<br />
economical touch ups
PENSIL ® Series PEN300 Silicone<br />
Sealant<br />
A Highly Elastomeric Silicone Product<br />
PENSIL ® 300 Silicone Sealants are one-part neutral curing sealants that<br />
provide outstanding per<strong>for</strong>mance con-<br />
trolling the spread of fire, smoke, and<br />
water during fire conditions.<br />
Highly Flexible, Excellent Adhesion<br />
and Aging<br />
PENSIL ® 300 Silicone Sealants are premium<br />
silicones that provide excellent<br />
adhesion characteristics while allowing<br />
up to ± 50% movement. These<br />
sealants also offer exceptional aging<br />
per<strong>for</strong>mance.<br />
<strong>Applications</strong><br />
PENSIL ® 300 Silicone Sealants are<br />
used to seal general construction,<br />
curtain wall and head of wall joints in<br />
both static and dynamic applications. PENSIL ® 300 Silicone Sealant is<br />
available in spray (PEN300) and self<br />
leveling (PEN300SL) grades.<br />
UL ® Classified<br />
A wide variety of user driven systems have been UL ® Classified and<br />
tested to UL2079 (ASTM E1966) in one, two, three, and four hour joints.<br />
<strong>Products</strong><br />
PEN300, PEN305, PEN305SL.<br />
Features<br />
Refer to product data sheet <strong>for</strong> physical properties.<br />
• Premium silicone: excellent<br />
long-term aging.<br />
• Neutral cure: odorless application.<br />
• Excellent adhesion: positive,<br />
long lasting bond.<br />
• Auto bonding: allows repairs<br />
and modifications.<br />
• Highly elastomeric: allows<br />
±50% movement.<br />
• Also approved <strong>for</strong> a variety<br />
of through-penetration<br />
firestop applications.<br />
5<br />
PENSIL ®<br />
PENSIL ® Series PEN300 Silicone<br />
Sealant<br />
1-800-992-1180
www.stifirestop.com<br />
<strong>Products</strong> and Specs At a Glance...<br />
Product Application Per<strong>for</strong>mance<br />
Application Material Application Tack-Free Clean Application UL ® 2079 % Movement<br />
Method Type Temperature Time* Up Productivity Tested<br />
Series ES Caulk Gun Acrylic 40-95°F 2 Hours Water Better Yes ±15%<br />
Series AS Spray Acrylic 60-90°F 2 Hours Water Best Yes ±18.75%<br />
Fast Tack Spray or Silicone 0-90°F 30 Minutes Low VOC Best Yes ±50%<br />
Self Leveling Co-Polymer Min. Spirits<br />
Series Pen Caulk Gun or<br />
Self Leveling<br />
Silicone (35)-140°F 5-9 Hours Min. Spirits Good Yes ±50%<br />
*Tack Free time dependent upon temperature and humidity.<br />
Consult appropriate product data sheet <strong>for</strong> more in<strong>for</strong>mation.<br />
Joint Estimation Table*<br />
Per 1/8" Installed Depth Per 1/4" installed Depth Per 1/2" Installed Depth Per 1" Installed Depth<br />
Joint Cu. In. Ft./Gal. Gal./ Cu.In. Ft./Gal. Gal./ Cu.In. Ft./Gal. Gal./ Cu.In. Ft./Gal. Gal./<br />
Width Per Ft. 100 Ft. Per Ft. 100 Ft. Per Ft. 100 Ft. Per Ft. 100 Ft.<br />
0.5 0.8 308.0 0.3 1.5 154.0 0.6 3.0 77.0 1.3 6.0 38.5 2.6<br />
0.75 1.1 205.3 0.5 2.2 102.7 1.0 4.5 51.3 1.9 9.0 25.7 3.9<br />
1.0 1.5 154.0 0.6 3.0 77.0 1.3 6.0 38.5 2.6 12.0 19.3 5.2<br />
1.5 2.2 102.7 1.0 4.5 51.0 2.0 9.0 25.7 3.9 18.0 12.8 7.8<br />
2.0 3.0 77.0 1.3 6.0 38.0 2.6 12.0 19.3 5.2 24.0 9.6 10.4<br />
2.5 3.8 61.6 1.6 8.0 31.0 3.3 15.0 15.4 6.5 30.0 7.7 13.0<br />
3.0 4.5 51.3 1.9 9.0 25.0 3.9 18.0 12.8 7.8 36.0 6.4 15.6<br />
3.5 5.2 44.0 2.3 11.0 22.0 4.6 21.0 11.0 9.1 42.0 5.5 18.2<br />
4.0 6.0 38.5 2.6 12.0 19.0 5.2 24.0 9.6 10.4 48.0 4.8 20.8<br />
5.0 7.5 30.8 3.2 15.0 15.0 6.5 30.0 7.7 13.0 60.0 3.9 26.0<br />
6.0 9.0 25.7 3.9 18.0 12.0 7.8 36.0 6.4 15.6 72.0 3.2 31.2<br />
Look up the joint width in left hand column. Calculations <strong>for</strong> depths ranging<br />
from 1/8" (0.125") to 1" are provided. Stated values are <strong>for</strong> caulking. To<br />
calculate spray requirements, add actual joint width + overspray to determine<br />
JOINT WIDTH. For example: actual joint width = 4", overspray = 1"<br />
on both sides. JOINT WIDTH in table would be 6". For wider joints such as<br />
8" joints, double the values shown in the 4" JOINT WIDTH estimation.<br />
* Metric conversions are available. Please contact Tech Support at 800-992-1180.<br />
6
Product Estimation and Installation<br />
Series AS Spray Equipment and Estimation<br />
SpecSeal ® Series AS200 Elastomeric Spray, as compared to paint, is a heavier architectural coating. It is<br />
designed to be applied at a wet coating thickness of 1/8 in. (0.125 in., 125 mils). At this coating thickness, the<br />
pump will consume one gallon of coating <strong>for</strong> every 12.8 sq. ft. Thus, the equipment used to apply it must be<br />
properly sized and matched in order to provide the required production rate. A few factors are critical in the<br />
selection of the right spray equipment.<br />
Pump: The spray pump must be capable of supplying sufficient material to the gun to properly atomize the<br />
coating when sprayed through a 0.026 in. spray tip (orifice) and provide a continuous spray without excessive<br />
surging or pausing. The pump will need to be capable of developing 3000 PSI (or more). The flow rate must<br />
be one gallon per minute (G.P.M.) minimum.<br />
We recommend a 1 G.P.M. pump or higher in order to satisfy higher production requirements and to allow<br />
<strong>for</strong> larger hoses or tip sizes at the higher end of the range.<br />
A SPRAY UNIT CAPABLE OF SPRAYING BLOCK FILLERS OR OTHER HEAVIER ARCHITECTURAL COATINGS<br />
SHOULD BE ADEQUATE.<br />
Tip Size: The tip size may vary from approximately 0.023 in. to 0.026<br />
in. The smaller tip will allow <strong>for</strong> spraying at a lower delivery rate which<br />
may af<strong>for</strong>d the applicator better control in certain applications.<br />
Moving to the larger size will increase delivery rates but may also<br />
require a larger pump or shorter fluid lines. Keep in mind that the tip<br />
will gradually wear and become larger. A reversible tip will help clear<br />
the occasional clog.<br />
We recommend that the applicator use a new 0.023 in. to 0.026 in.<br />
spray tip. If higher production rates are required and the pump can<br />
support it, the larger tip size may be used. Consult the spray gun<br />
manufacturer <strong>for</strong> tips that will produce the desired spray pattern.<br />
Fluid Lines: The diameter and length of the fluid lines will also effect<br />
the ability of the pump to supply the tip at an adequate rate. Longer<br />
hoses and the need to raise the material up from floor level to high ceilings will also be a factor in the pump’s<br />
ability to supply the gun.<br />
We Recommend a minimum of 3/8 in. I.D. hose <strong>for</strong> up to 50 ft. runs and 1/2 in. to 3/4 in. <strong>for</strong> longer runs.<br />
NOTE: Pump discharge ports and all fittings must be minimally as large as the hose in order to benefit from<br />
increasing the hose size.<br />
SAFETY NOTE: AIRLESS SPRAY EQUIPMENT OPERATES AT VERY HIGH PRESSURE. PROTECTIVE CLOTHING, GLOVES,<br />
AND EYE PROTECTION ARE REQUIRED. CONSULT SPRAY EQUIPMENT MANUFACTURER FOR RECOMMENDATIONS<br />
CONCERNING THE SAFE USE AND HANDLING OF THIS EQUIPMENT. THOROUGHLY REVIEW MSDS AND PRODUCT<br />
DATA SHEETS PRIOR TO USE.<br />
Elastomeric Spray Estimation <strong>for</strong> Fluted Deck<br />
W<br />
L<br />
H<br />
L = Length of Joint (ft)<br />
W = Width of Joint (in)<br />
H = Height of Joint (in)<br />
Area of Flutes (sq. in.) = (L x 12 x H)/2<br />
Area of Joint (sq. in.) = L x 12 x W<br />
Area of Overspray (sq. in.) = L x 12<br />
Volume (cu. in.) = (Area of Flutes + Area of Joint +<br />
Area of Overspray) x .125*<br />
Multiply by 2 <strong>for</strong> both sides.<br />
One 5-gallon pail of Series AS Elastomeric Spray<br />
contains 1,155 cubic inches<br />
*Based on 1/8 in. wet coating thickness<br />
7<br />
The following equipment is manufactured<br />
by Titan Tool, Inc.,<br />
Franklin Lakes, NJ.<br />
PowrTwin<br />
Model 3500<br />
Sprayer<br />
Electric or gas<br />
powered airless<br />
sprayer<br />
Important Note: This<br />
in<strong>for</strong>mation is provided<br />
<strong>for</strong> estimational purposes<br />
only. No waste or excess<br />
overspray has been<br />
included and applicator<br />
skill may affect requirements.<br />
1-800-992-1180
Gypsum Wall <strong>Construction</strong><br />
HW-D-0086 HW-D-0041<br />
HW-D-0039<br />
www.stifirestop.com<br />
Head-of-Wall Systems<br />
System No. Description Floor/Roof Hourly Rating Product(s)<br />
HW-D-0034 Max. 1” joint. Caulk and backing.<br />
1/4" sealant depth.<br />
Steel Deck 1 or 2 Hrs ES<br />
HW-D-0043 Max. 1 to 2” joint. Optional metal or Steel deck<br />
plastic conduit. Perpendicular wall.<br />
1,2,3 or 4 Hrs AS200<br />
HW-D-0044 Max. 1 to 2” joint. Concrete slab 1,2,3 or 4 Hrs AS200<br />
HW-D-0054 Max. 2” joint. Parallel wall. Steel deck 2 Hrs ES/LCI*<br />
HW-D-0079 Max. 3/4” joint. Caulk only. Concrete slab 1 or 2 Hrs ES<br />
HW-D-0137 Max. 1” joint. Parallel wall. Steel deck 1 or 2 Hrs AS200<br />
HW-D-0194 Max. 3/4" joint. Shaft wall system.<br />
Caulk only.<br />
Concrete slab 1 or 2 Hrs ES<br />
HW-D-0210 Max. 3/4" joint. Parallel wall.<br />
Caulk only.<br />
Steel deck 1 or 2 Hrs ES<br />
HW-D-0241 Max. 3/4" joint. Castle cut gypsum<br />
board. Caulk only.<br />
Steel deck 1 or 2 Hrs LCI*<br />
HW-D-0242 Max. 3/4" joint. Caulk only. Concrete slab 1 or 2 Hrs LCI*<br />
HW-D-0243 Max. 3/4" joint. Parallel wall.<br />
Caulk only.<br />
Steel deck 1 or 2 Hrs LCI*<br />
HW-D-0363 Max. 3/4” joint. Perpendicular wall. Steel deck 1 or 2 Hrs AS200<br />
HW-D-0365 Max. 1” joint. Parallel wall offset on<br />
valley of flute.<br />
Steel deck 1 or 2 Hrs AS200<br />
HW-D-0371 Max. 3/4” joint. Concrete slab 1 or 2 Hrs AS200<br />
HW-S-0043 Max. 3/4" joint. Caulk only.<br />
Allows point contact.<br />
Concrete slab 1 or 2 Hrs ES<br />
HW-S-0044 Max. 3/4" joint. Castle cut gypsum. Steel deck<br />
Caulk only. Allows point contact.<br />
1 or 2 Hrs ES<br />
Please reference individual UL ® Classified Systems <strong>for</strong> movement.<br />
*See LCI Product Data Sheet <strong>for</strong> further in<strong>for</strong>mation.<br />
Concrete/Block Wall <strong>Construction</strong><br />
System No. Description Floor/Roof Hourly Rating Product(s)<br />
HW-D-0039 Max. 1” joint. Caulk and backing. Steel Deck 1 or 2 Hrs ES<br />
1/4" sealant depth. Perpendicular wall.<br />
HW-D-0041 Max. 1” joint. Caulk over backer rod. Concrete slab 1,2 or 3 Hrs ES<br />
HW-D-0055 Max. 1” joint. Parallel wall. Steel deck 1 or 2 Hrs AS200<br />
HW-D-0086 Max. 1 to 2” joint. Optional metal or Steel deck 1,2,3 or 4 Hrs AS200<br />
plastic conduit. Perpendicular wall.<br />
HW-D-0156 Max. 2” joint. Caulk and backing. Concrete slab 1,2,3 or 4 Hrs ES<br />
HW-D-0157 Max. 2” joint. Caulk and backing. Concrete slab 1,2,3 or 4 Hrs PEN300<br />
HW-D-0236 Max. 3/4" joint. Parallel wall. Steel deck 1 or 2 Hrs ES<br />
Caulk only.<br />
HW-D-0244 Max. 3/4" joint. Caulk only. Concrete slab 1 or 2 Hrs LCI*<br />
HW-D-0245 Max. 3/4" joint. Parallel wall. Steel deck 1 or 2 Hrs LCI*<br />
Caulk only.<br />
HW-D-0312 Max. 1” joint. Caulk over backer rod. Concrete slab 1,2 or 3 Hrs PEN300<br />
HW-D-0366 Max. 1” joint. Parallel wall offset on Steel deck 1 or 2 Hrs AS200<br />
valley of flute.<br />
HW-D-1001 Max. 4” joint. Caulk and backing. Concrete slab 1,2, or 3 Hrs PEN300<br />
HW-D-1004 Max. 4” joint. Silicone foam. Concrete slab 1 or 2 Hrs PEN200<br />
HW-D-1005 Max. 4” joint. Spray and backing. Concrete slab 1 or 2 Hrs AS200<br />
HW-D-1006 Max. 4” joint. Caulk and backing. Concrete slab 1,2, or 3 Hrs ES<br />
HW-D-1018 Max. 4” joint. Caulk and backing. Concrete slab 1 or 2 Hrs PEN300<br />
1/4" sealant system.<br />
HW-D-1034 Max. 4” joint. Spray and backing. Concrete slab 1,2, or 3 Hrs AS200<br />
= optimum system<br />
8<br />
HW-D-0043<br />
HW-D-0079 HW-D-0194<br />
Please reference individual UL ® Classified Systems <strong>for</strong> movement.<br />
*See LCI Product Data Sheet <strong>for</strong> further in<strong>for</strong>mation.
Head of Wall Systems <strong>for</strong> Fireproofing and Special Conditions<br />
System No. Description Floor/Roof Hourly Rating Product(s)<br />
HW-D-0088 Max. 1” joint. Perpendicular wall. Steel deck 1 or 2 Hrs AS200<br />
Fireproofed deck. Cafco ® or<br />
Monokote ® Fireproofing.<br />
HW-D-0099 Max. 1” joint. Parallel gypsum wall. Steel deck 1 or 2 Hrs AS200<br />
Fireproofed deck and beam/joist<br />
penetration. Cafco ® or Monokote ®<br />
Fireproofing.<br />
HW-D-0102 Max. 1 to 2” joint. Perpendicular wall. Steel deck 1,2,3 or 4 Hrs AS200<br />
Fireproofing in the flutes. Cafco ®<br />
or Monokote ® Fireproofing<br />
HW-D-0103 Max. 3/4" joint. Castle cut gypsum Steel deck 1 or 2 Hrs ES<br />
board. Caulk only. Optional Cafco ®<br />
or Monokote ® Fireproofing<br />
HW-D-0136 Max. 1” joint. Perpendicular gypsum Steel deck 1 or 2 Hrs AS200<br />
wall. Fireproofing in the flutes.<br />
Cafco ® or Monokote ® Fireproofing<br />
HW-D-0139 Max. 1” joint. Perpendicular concrete Steel deck 1, 2 or 3 Hrs AS200<br />
wall. Fireproofed deck. Cafco ® or<br />
Monokote ® Fireproofing.<br />
HW-D-0140 Max. 1” joint. Parallel concrete wall. Steel deck 1, 2 or 3 Hrs AS200<br />
Fireproofed deck and beam/joist<br />
penetration. Cafco ® or Monokote ®<br />
Fireproofing.<br />
HW-D-0152 Max. 1 to 2” joint. Perpendicular Steel deck 1,2,3 or 4 Hrs AS200<br />
gypsum wall. Fireproofing in the flutes.<br />
Cafco ® or Monokote ® Fireproofing<br />
HW-D-0153 Max. 1” joint. Parallel gypsum wall. Steel deck 1 or 2 Hrs AS200<br />
Fireproofed deck and beam/joist<br />
penetration. Cafco ® or Monokote ®<br />
Fireproofing.<br />
HW-D-0252 Max. 1” joint. Gypsum wall to Floor supported 1 or 2 Hrs AS200<br />
bottom of beam. Cafco ® or by beam.<br />
Monokote ® Fireproofing<br />
HW-D-0253 Max. 1” joint. Concrete wall to Floor supported 1,2 or 3 Hrs AS200<br />
bottom of beam. Cafco ® or by beam.<br />
Monokote ® Fireproofing<br />
HW-D-0260 Max. 3/4” joint. Flutes and joint Steel deck 1 or 2 Hrs AS200<br />
filled with fireproofing. Cafco ® or<br />
Monokote ® Fireproofing<br />
HW-D-0377 Fireproofed Beam Parallel to Gypsum Fireproofed steel 1 and 2 hr AS200<br />
Wall with Gap Between Wall and deck<br />
Beam Sealed.<br />
HW-D-0378 Fireproofed Beam Parallel to Concrete Fireproofed steel 1 and 2 hr AS200<br />
Wall with Gap Between Wall and deck<br />
Beam Sealed.<br />
Please reference individual UL ® Classified Systems <strong>for</strong> movement.<br />
Bottom of Wall Systems<br />
System No. Description Floor/Roof Hourly Rating Product(s)<br />
BW-S-0003 Max. 3/4” joint. Caulk only. Concrete floor 1 or 2 Hrs ES, LCI*<br />
Please reference individual UL ® Classified Systems <strong>for</strong> movement.<br />
*See LCI Product Data Sheet <strong>for</strong> further in<strong>for</strong>mation.<br />
= optimum system<br />
9<br />
HW-D-0099 HW-D-0103<br />
HW-D-0260 BW-S-0003<br />
1-800-992-1180
CW-S-1002<br />
CW-S-2003<br />
www.stifirestop.com<br />
Curtain Wall Systems<br />
Steel Stud Curtain Walls<br />
System No. Description Product(s)<br />
CW-S-1002 Gyp.sheathing/steel studs, min. wool insulation. AS200/Fast Tack (T)<br />
Exterior surfaces opt.<br />
CW-S-1003 Gyp.sheathing/steel studs, fiberglass insulation. AS200/Fast Tack (T)<br />
Exterior surfaces opt.<br />
CW-S-1006 Gyp.sheathing/steel studs, min. wool insulation. AS200/Fast Tack (I)<br />
Exterior surfaces opt.<br />
CW-S-1010 Gyp.sheathing/steel studs, min. wool. AS200/Fast Tack (T)<br />
Ext. opt. No Int. Gyp. Below slab.<br />
CW-S-1012 Gyp.sheathing/steel studs, min. wool insulation. AS200/Fast Tack (R)<br />
Exterior surfaces opt.<br />
CW-S-1013 Gyp.sheathing/steel studs, fiberglass insulation. AS200/Fast Tack (R)<br />
Exterior surfaces opt.<br />
CW-S-1014 Gyp.sheathing/steel studs, min. wool. Ext. opt. AS200/Fast Tack (R)<br />
No Int. Gyp. Below slab.<br />
Insulation Key: T=Thermafiber, I=IIG, R=Roxul<br />
Aluminum Tubular Mullion Curtain Walls - Glass Spandrel<br />
System No. Description Product(s)<br />
CW-D-2008 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
5% vertical shear.<br />
CW-D-2011 4-in. 4 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
5% vertical shear.<br />
CW-D-2022 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (I)<br />
5% vertical shear.<br />
CW-D-2031 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (R)<br />
5% vertical shear.<br />
CW-D-2039 Thermafiber Light Gauge Framing Components, AS200/Fast Tack (T)<br />
max. 4-in. wide safing slot. 5% vertical shear.<br />
CW-S-2003 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
CW-S-2009 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (R)<br />
CW-S-2034 4-in. 4 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
CW-S-2039 2-in. 8 pcf CW insulation, max.8-in. wide safing slot. AS200/Fast Tack (F)<br />
CW-S-2044 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (I)<br />
CW-S-2050 2-in. 8pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (I)<br />
3 Hr System!<br />
CW-S-2055 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (R)<br />
CW-S-2058 Thermafiber Light Gauge Framing Components, AS200/Fast Tack (T)<br />
max. 4-in. wide safing slot.<br />
Insulation Key: T = Thermafiber, I = IIG, R = Roxul, F = Fibrex<br />
NOTE: Unless otherwise noted, STI Curtain Wall Systems are all 2-hour systems. The “D” suffix<br />
systems are dynamic; the “S” suffix systems are static.<br />
= optimum system<br />
10
Aluminum Tubular Mullion Curtain Walls - Aluminum Spandrel<br />
System No. Description Product(s)<br />
CW-D-2009 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
5% vertical shear.<br />
CW-D-2012 4-in. 4 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
5% vertical shear.<br />
CW-D-2023 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (I)<br />
5% vertical shear.<br />
CW-D-2032 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (R)<br />
5% vertical shear.<br />
CW-D-2040 Thermafiber Light Gauge Framing Components, AS200/Fast Tack (T)<br />
max. 4-in. wide safing slot. 5% vertical shear.<br />
CW-S-2006 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
CW-S-2010 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (R)<br />
CW-S-2035 4-in. 4 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
CW-S-2040 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (F)<br />
CW-S-2045 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (I)<br />
CW-S-2051 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (I)<br />
3 Hr System!<br />
CW-S-2056 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (R)<br />
CW-S-2059 Thermafiber Light Gauge Framing Components, AS200/Fast Tack (T)<br />
max. 4-in. wide safing slot.<br />
Insulation Key: T = Thermafiber, I = IIG, R = Roxul, F = Fibrex<br />
Aluminum Tubular Mullion Curtain Walls - Stone Spandrel<br />
System No. Description Product(s)<br />
CW-D-2010 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
5% vertical shear.<br />
CW-D-2013 4-in. 4 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
5% vertical shear.<br />
CW-D-2024 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (I)<br />
5% vertical shear.<br />
CW-D-2033 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (R)<br />
5% vertical shear.<br />
CW-D-2041 Thermafiber Light Gauge Framing Components, AS200/Fast Tack (T)<br />
max. 4-in. wide safing slot. 5% vertical shear.<br />
CW-S-2008 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
CW-S-2011 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (R)<br />
CW-S-2036 4-in. 4 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
CW-S-2041 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (F)<br />
CW-S-2046 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (I)<br />
CW-S-2052 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (I)<br />
3 Hr System!<br />
CW-S-2057 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (R)<br />
CW-S-2060 Thermafiber Light Gauge Framing Components, AS200/Fast Tack (T)<br />
max. 4-in. wide safing slot.<br />
Insulation Key: T = Thermafiber, I = IIG, R = Roxul, F = Fibrex<br />
= optimum system<br />
11<br />
CW-S-2006 CW-S-2008<br />
1-800-992-1180
CW-S-2021<br />
CW-S-2014<br />
www.stifirestop.com<br />
Curtain Wall Systems (Continued)<br />
Aluminum I Mullion Curtain Walls - Glass Spandrel<br />
System No. Description Product(s)<br />
CW-D-2001 4-in. 4 pcf CW insulation, max. 10-in. wide safing slot. AS200/Fast Tack (T)<br />
5% vertical shear.<br />
CW-S-2021 4-in. 4 pcf CW insulation, max. 10-in. wide safing slot. AS200/Fast Tack (T)<br />
CW-S-2049 3-in. 8 pcf CW insulation, max. 4-in. wide safing slot. AS200/Fast Tack (I)<br />
3 Hr System!<br />
Insulation Key: T = Thermafiber, I = IIG<br />
Aluminum I Mullion Curtain Walls - Aluminum Spandrel<br />
System No. Description Product(s)<br />
CW-D-2002 4-in. 4 pcf CW insulation, max. 10-in. wide safing slot. AS200/Fast Tack (T)<br />
5% vertical shear.<br />
CW-S-2022 4-in. 4 pcf CW insulation, max. 10-in. wide safing slot. AS200/Fast Tack (T)<br />
Insulation Key: T = Thermafiber<br />
Aluminum I Mullion Curtain Walls - Stone Spandrel<br />
System No. Description Product(s)<br />
CW-D-2003 4-in. 4 pcf CW insulation, max. 10-in. wide safing slot. AS200/Fast Tack (T)<br />
5% vertical shear.<br />
CW-S-2023 4-in. 4 pcf CW insulation, max. 10-in. wide safing slot. AS200/Fast Tack (T)<br />
Insulation Key: T = Thermafiber<br />
Pre-Cast Concrete Curtain Walls - Non Insulated<br />
System No. Description Product(s)<br />
CW-D-2004 Non-insulated panels, max. 8-in. wide safing slot. AS200/Fast Tack (R)<br />
5% vertical shear.<br />
CW-D-2005 Non-insulated panels, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
5% vertical shear.<br />
CW-D-2020 Non-insulated panels, max. 8-in. wide safing slot. AS200/Fast Tack (I)<br />
5% vertical shear.<br />
CW-S-2013 Non-insulated panels, max. 8-in. wide safing slot. AS200/Fast Tack (R)<br />
CW-S-2014 Non-insulated panels, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
CW-S-2047 Non-insulated panels, max. 8-in. wide safing slot. AS200/Fast Tack (I)<br />
Insulation Key: T = Thermafiber, I = IIG, R = Roxul<br />
Pre-Cast Concrete Curtain Walls - Insulated<br />
System No. Description Product(s)<br />
CW-D-2006 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
5% vertical shear.<br />
CW-D-2007 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (R)<br />
5% vertical shear.<br />
CW-D-2021 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (I)<br />
5% vertical shear.<br />
CW-S-2025 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (T)<br />
CW-S-2026 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (R)<br />
CW-S-2048 2-in. 8 pcf CW insulation, max. 8-in. wide safing slot. AS200/Fast Tack (I)<br />
3 Hr System!<br />
Insulation Key: T = Thermafiber, I = IIG, R = Roxul<br />
12
Anatomy of a Curtain Wall<br />
1. Concrete Floor<br />
2. Safing System<br />
2A. Forming Material<br />
2B. Fill, Void, or Cavity Material<br />
3. Curtain Wall Assembly<br />
3A. Framing<br />
3A.1. Aluminum Mullions<br />
3A.2. Aluminum Transoms<br />
3B. Sprandrel Panels<br />
3C. Vision Panels<br />
3D. Stiffener Tees<br />
3E. Spandrel Panel Perimeter<br />
Angles<br />
3F. Curtain Wall Insulation<br />
3G. Framing Covers-<br />
Curtainwall Insulation<br />
13<br />
1<br />
3A.1<br />
Mineral Wool Orientation...<br />
Sometimes It Pays To Go Against The Grain!<br />
2B<br />
3A.2<br />
Mineral wool orientation can be critical in rated designs. The ability to compress<br />
and rebound allows joints to move and assures a fit that starts and stays<br />
tight!<br />
Oriented parallel to the<br />
floor, mineral wool is<br />
hard to compress and<br />
has no rebound.<br />
3D<br />
3F<br />
Oriented perpendicular<br />
to the floor, mineral wool<br />
can be compressed <strong>for</strong> a<br />
tight fit and rebounds to<br />
keep the seal tightly<br />
closed.<br />
2A<br />
3G<br />
3E<br />
3B<br />
3C<br />
1-800-992-1180
FF-D-0005<br />
FF-D-1001<br />
FF-D-1010<br />
FF-D-1025<br />
www.stifirestop.com<br />
General <strong>Construction</strong> <strong>Joints</strong><br />
Floor-to-Floor Concrete Systems<br />
System No. Description Hourly Rating Product(s)<br />
FF-D-0001 Max. 1” joint. Caulk over backer rod 1,2 or 3 Hrs PEN300 or<br />
(both sides). PEN300SL (top)<br />
FF-D-0005 Max. 1” joint. Caulk over backer rod<br />
(both sides).<br />
1,2 or 3 Hrs ES<br />
FF-D-0015 Max. 2” joint. Caulk and backing. 1,2,3 or 4 Hrs ES<br />
FF-D-0016 Max. 2” joint. Caulk and backing. 1,2,3 or 4 Hrs PEN300 or<br />
PEN300SL<br />
FF-D-0019 Max. 1” joint. Caulk and backing. 1 or 1-1/2 Hrs PEN300 or<br />
Precast, autoclaved, aerated<br />
concrete.<br />
PEN300SL<br />
FF-D-0028 Max. 2” joint. Spray and backing. 1,2,3 or 4 Hrs AS200<br />
FF-D-0035 Max. 1/2" joint. Caulk only. 1 or 2 Hrs ES<br />
FF-D-0036 Max. 1/2" joint. Caulk only. 1 or 2 Hrs PEN300 or<br />
PEN300SL<br />
FF-D-1001 Max. 4” joint. Caulk and backing. 1,2 or 3 Hrs PEN300 or<br />
PEN300SL<br />
FF-D-1006 Max. 4” joint. Silicone foam. 1 or 2 Hrs PEN200<br />
FF-D-1007 Max. 4” joint. Spray and backing. 1 or 2 Hrs AS200<br />
FF-D-1008 Max. 4” joint. Caulk and backing. 1, 2 or 3 Hrs ES<br />
FF-D-1010 Max. 4” joint. Caulk and backing. 1 or 2 Hrs PEN300 or<br />
1/4” of sealant. PEN300SL<br />
FF-D-1025 Max. 4” joint. Spray and backing. 1, 2 or 3 Hrs AS200<br />
FF-S-0013 Max. 3/4" joint. Caulk and 1 or 2 Hrs PEN300 or<br />
ULTRA BLOCK ® <strong>for</strong>ming. PEN300SL<br />
FF-S-0020 Max. 2" joint. Caulk and 1,2, 3 or 4 Hrs PEN300 or<br />
ULTRA BLOCK ® <strong>for</strong>ming. PEN300SL<br />
FF-S-1009 Max. 4" joint. Caulk and 1 or 2 Hrs PEN300 or<br />
ULTRA BLOCK ® <strong>for</strong>ming. PEN300SL<br />
= optimum system<br />
Typical Modes of Joint Failure<br />
Know and avoid the pitfalls by careful PLANNING, PREPARATION,<br />
and APPLICATION!<br />
14<br />
Adhesive Failure<br />
Problem: Sealant<br />
pulls away from<br />
substrate.<br />
Solution: Improve<br />
bond by cleaning<br />
all contact areas<br />
Substrate Failure<br />
Problem: Contact<br />
surfaces fail due to<br />
stress applied by<br />
sealant.<br />
Solution: Repair<br />
substrate and/or<br />
choose a more<br />
flexible joint<br />
design.<br />
Cohesive Failure<br />
Problem: Sealant<br />
tears when<br />
extended.<br />
Solution: Choose<br />
a more flexible<br />
joint design.
Floor-to-Wall Concrete Systems<br />
System No. Description Hourly Rating Product(s)<br />
FW-D-0005 Max. 1” joint. Caulk over backer rod 1,2 or 3 Hrs ES<br />
(both sides).<br />
FW-D-0009 Max. 2” joint. Caulk and backing. 1,2,3 or 4 Hrs ES<br />
FW-D-0010 Max. 2” joint. Caulk and backing. 1,2,3 or 4 Hrs PEN300 or<br />
PEN300SL<br />
FW-D-0014 Max. 1” joint. Caulk and backing. 1 or 1-1/2 Hrs PEN300 or<br />
Precast autoclaved, aerated concrete. PEN300SL<br />
FW-D-0023 Max. 2” joint. Spray and backing. 1,2,3 or 4 Hrs AS200<br />
FW-D-0030 Max. 1/2" joint. Caulk only. 1 or 2 Hrs ES<br />
FW-D-0031 Max. 1/2" joint. Caulk only. 1 or 2 Hrs PEN300 or<br />
PEN300SL<br />
FW-D-0032 Max. 1” joint. Caulk over backer rod 1,2 or 3 Hrs PEN300 or<br />
(both sides). PEN300SL (top)<br />
FW-D-1001 Max. 4” joint. Caulk and backing. 1,2 or 3 Hrs PEN300 or<br />
PEN300SL<br />
FW-D-1005 Max. 4” joint. Silicone foam. 1 or 2 Hrs PEN200<br />
FW-D-1006 Max. 4” joint. Spray and backing. 1 or 2 Hrs AS200<br />
FW-D-1007 Max. 4” joint. Caulk and backing. 1, 2 or 3 Hrs ES<br />
FW-D-1010 Max. 4” joint. Caulk and backing. 1 or 2 Hrs PEN300 or<br />
1/4” of sealant. PEN300SL<br />
FW-D-1035 Max. 4” joint. Spray and backing. 1, 2 or 3 Hrs AS200<br />
= optimum system<br />
Beware of Three Sided Adhesion<br />
Bond breaker tapes, foam backer rods, even mineral wool used properly<br />
can prevent cohesive failures!<br />
WRONG!<br />
Sealant<br />
bonds to the<br />
deflection<br />
track. The<br />
wall may<br />
become load<br />
bearing.<br />
RIGHT!<br />
Bond breaker<br />
prevents<br />
adhesion to<br />
the track.<br />
15<br />
Flexing the<br />
joint either<br />
tears the<br />
sealant when<br />
extended or<br />
damages the<br />
substrate when<br />
compressed.<br />
Sealant<br />
stretches<br />
freely as<br />
the joint is<br />
flexed.<br />
FW-D-0005 FW-D-0010<br />
FW-D-0032 FW-D-1010<br />
FW-D-1035<br />
1-800-992-1180
WW-D-0001<br />
WW-D-0004<br />
WW-D-1006<br />
www.stifirestop.com<br />
General <strong>Construction</strong> <strong>Joints</strong> (Continued)<br />
Wall-to-Wall Concrete Systems<br />
System No. Description Hourly Rating Product(s)<br />
WW-D-0001 Max. 1” joint. Caulk over backer rod 1,2 or 3 Hrs PEN300<br />
WW-D-0004 Max. 1” joint. Caulk over backer rod 1,2 or 3 Hrs ES<br />
WW-D-0018 Max. 2” joint. Caulk and backing. 1,2,3 or 4 Hrs ES<br />
WW-D-0019 Max. 2” joint. Caulk and backing. 1,2,3 or 4 Hrs PEN300<br />
WW-D-0020 One side seal. Max. 2” joint. 1,2,3 or 4 Hrs PEN300<br />
Caulk and backing.<br />
WW-D-1001 Max. 4” joint. Caulk and backing. 1,2, or 3 Hrs PEN300<br />
WW-D-1002 One side seal. Max. 4” joint. 1,2, or 3 Hrs PEN300<br />
Caulk and backing.<br />
WW-D-1005 Max. 4” joint. Silicone foam. 1 or 2 Hrs PEN200<br />
WW-D-1006 Max. 4” joint. Spray and backing. 1 or 2 Hrs AS200<br />
WW-D-1007 Max. 4” joint. Caulk and backing. 1,2, or 3 Hrs ES<br />
WW-D-1027 Max. 4” joint. Caulk and backing. 1 or 2 Hrs PEN300<br />
1/4" sealant system.<br />
WW-D-1037 Max. 4” joint. Spray and backing. 1,2, or 3 Hrs AS200<br />
WW-S-0017 One side seal. Max. 3/4" joint. 1 or 2 Hrs PEN300<br />
Caulk and ULTRA BLOCK ® <strong>for</strong>ming.<br />
WW-S-0023 Max. 2" joint. Caulk and 1,2,3, or 4 Hrs PEN300<br />
ULTRA BLOCK ® <strong>for</strong>ming.<br />
WW-S-0029 Max. 2" joint. Caulk and 1,2,3, or 4 Hrs PEN300<br />
ULTRA BLOCK ® <strong>for</strong>ming.<br />
WW-S-0038 Max. 1” joint <strong>for</strong> precast panels. 1 or 2 Hrs ES on<br />
Various exterior sealants. Interior<br />
WW-S-1009 Max. 4" joint. Caulk and 1 or 2 Hrs PEN300<br />
ULTRA BLOCK ® <strong>for</strong>ming.<br />
WW-S-1010 Max. 4" joint. Caulk and 1 or 2 Hrs PEN300<br />
ULTRA BLOCK ® <strong>for</strong>ming.<br />
= optimum system<br />
16
Ordering In<strong>for</strong>mation<br />
<strong>Construction</strong> <strong>Joints</strong> <strong>Products</strong><br />
Catalog<br />
Number<br />
UPC<br />
730573 Description<br />
SpecSeal ® ES Elastomeric Sealant<br />
ES100<br />
08100<br />
ES129<br />
08129<br />
ES120<br />
08103<br />
ES105<br />
08105<br />
SpecSeal<br />
AS205<br />
07107<br />
® Spray <strong>Products</strong><br />
FT305<br />
01190<br />
PENSIL ® Silicone Joint Sealant<br />
PEN300<br />
PEN305<br />
PEN305SL<br />
Accessories<br />
SSAMW<br />
SSACG<br />
SSAQCG<br />
SSASCG<br />
01120<br />
01125<br />
01126<br />
05001<br />
05020<br />
05021<br />
05022<br />
Elastomeric Sealant 10.1 oz. Tube, 18.2 cu. in. (300 ml)<br />
Elastomeric Sealant 29 oz. Tube, 52 cu. in. (858 ml)<br />
Elastomeric Sealant 20 oz. Sausage, 36 cu. in. (592 ml)<br />
Elastomeric Sealant 5 gal. Pail, 1,155 cu. in. (19.0 liters)<br />
Elastomeric Spray (<strong>Construction</strong> <strong>Joints</strong>) 5 gal. Pail,<br />
1,155 cu. in. (19.0 liters)<br />
Fast Tack <strong>Firestop</strong> Spray, 5 gal. Pail, 1,155 cu. in. (19.0 liters)<br />
Silicone 10.3 oz. Tube, 18.6 cu. in. (305 ml)<br />
Silicone 5 gal. Pail, 1,155 cu. in. (19.0 liters)<br />
Self-Leveling Silicone 5 gal. Pail, 1,155 cu. in. (19.0 liters)<br />
Mineral Wool Boards (2) - 2'x4'x1.5" Per Box<br />
Caulk Gun (11 oz.)<br />
Caulk Gun (Quart Size)<br />
Caulk Gun (Sausage Size)<br />
Unit<br />
Package<br />
Quantity<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
Standard<br />
Package<br />
Quantity<br />
12<br />
10<br />
12<br />
1<br />
1<br />
1<br />
24<br />
1<br />
1<br />
1<br />
4<br />
1<br />
1<br />
Weight<br />
Each<br />
1.12 lbs. (0.51 kg.)<br />
3.04 lbs. (1.38 kg.)<br />
1.96 lbs. (0.89 kg.)<br />
62.00 lbs. (28.12 kg.)<br />
50.00 lbs. (22.68 kg.)<br />
49.00 lbs. (22.23 kg.)<br />
1.10 lbs. (0.50 kg.)<br />
56.00 lbs. (25.40 kg.)<br />
56.00 lbs. (25.40 kg.)<br />
12.00 lbs (5.44 kg.)<br />
1.49 lbs. (0.68 kg.)<br />
2.50 lbs. (1.13 kg.)<br />
2.90 lbs. (1.32 kg.)
STI Rep./Distributor<br />
IFC<br />
For more in<strong>for</strong>mation on the complete STI line,<br />
please call 1-800-992-1180 or visit us at www.stifirestop.com.<br />
200 Evans Way<br />
Somerville, NJ 08876<br />
Toll Free: 800-992-1180<br />
Fax: (908) 526-9623<br />
e-mail: specseal@stifirestop.com<br />
EZ-Path and High-Traffic are trademarks of Specified Technologies, Inc.<br />
SpecSeal ® and Triple S ® are registered trademarks of Specified Technologies, Inc.<br />
UL ® is a registered trademark of Underwriters Laboratories, Inc.<br />
ULTRA BLOCK ® is a registered trademark of Backer Rod Manufacturing Inc. Patent #4,756,945<br />
© Copyright 2004. All rights reserved.<br />
ZSTI3129
The eZ-PaTh ® SySTem<br />
The Zero-Maintenance Solution <strong>for</strong> <strong>Firestop</strong>ping Cables<br />
www.stifirestop.com
2<br />
Maximum Fire & Smoke Protection<br />
• Maximum resistance to fire and smoke whether<br />
empty or 100% visually filled.<br />
• Assures fire and smoke protection with every new or<br />
retrofit cable installation.<br />
• Superior fire and smoke leakage vs. standard sleeve<br />
and putty systems.<br />
• Unlike conventional sleeve and putty systems,<br />
EZ-Path ® remains fire and smoke compliant 100% of<br />
the time!<br />
Fast Acting Intumescence<br />
• Engineered <strong>for</strong> rapid expansion when exposed to<br />
fire or high temperatures.<br />
• Intumescent material responds to flames or heat<br />
by quickly sealing the pathway and preventing the<br />
passage of flames and smoke.<br />
• Innovative built-in firestop design assures it is firestopped<br />
and smoke-sealed — even at maximum<br />
cable loading.<br />
The Zero-Maintenance Solution <strong>for</strong><br />
No <strong>Firestop</strong>ping Required<br />
• Built-in firestopping system automatically<br />
adjusts to the number of cables installed.<br />
• Design assures it is firestopped at all stages<br />
of use.<br />
• Mechanical application eliminates the use of<br />
sealant, putty and other products that need<br />
to be removed and replaced.<br />
Toll Free Technical Support - 1-800-992-1180
<strong>Firestop</strong>ping Cables<br />
Specifications<br />
All data, video, and communications cable bundles shall<br />
utilize an enclosed fire rated pathway device wherever said<br />
cables penetrate rated walls. The fire-rated pathway shall<br />
contain a built-in fire sealing system sufficient to maintain<br />
the hourly fire rating of the barrier being penetrated. The<br />
self-contained sealing system shall automatically adjust<br />
to the installed cable loading and shall permit cables to<br />
be installed, removed, or retrofitted without the need to<br />
adjust, remove or reinstall firestop materials. The pathway<br />
shall be UL ® Classified and/or FM Systems Approved and<br />
tested to the requirements of ASTM E814 (UL1479).<br />
Specified Divisions<br />
DIV. 7 07 84 00 Penetration<br />
<strong>Firestop</strong>ping<br />
DIV. 26 26 00 00 Electrical<br />
DIV. 27 27 00 00 Communications<br />
Initial Install<br />
eZ-Path ® — always Compliant<br />
Pays <strong>for</strong> Itself in a Few Cable Changes<br />
• All-in-one design installs in minutes.<br />
• Conveniently packaged kits <strong>for</strong> easy installation — no<br />
additional parts to order.<br />
• Splits apart <strong>for</strong> old work.<br />
• Clean, professional, engineered appearance.<br />
• Easy moves, adds and changes.<br />
• Can be installed as the wall is being built.<br />
Per<strong>for</strong>mance<br />
• UL ® Classified and FM Approved in accordance with<br />
ASTM E814 (UL1479).<br />
• UL systems are available <strong>for</strong> up to 4 hour rated floor and<br />
wall constructions.<br />
• Empty or full, EZ-Path ® is continuously code compliant<br />
— 100% of the time.<br />
• Tested and approved cable capacities range from 0 to<br />
100% visual fill.<br />
• U.S. Patent 6,732,481<br />
Visit us on the web - www.stifirestop.com<br />
FIRESTOP DEVICE FOR USE IN THROUGH-PENETRATION FIRESTOP<br />
SYSTEMS. SEE UL DIRECTORY OF PRODUCTS CERTIFIED FOR<br />
CANADA AND UL FIRE RESISTANCE DIRECTORY.<br />
3
4<br />
Height x Width<br />
Inches (mm)<br />
Choose the Right EZ-PATH ® Configuration<br />
For Your Cabling Needs!<br />
Series 22 Series 33 Series 44<br />
1.5” x 1.5”<br />
(38 mm x 38 mm)<br />
3.0” x 3.0”<br />
(76 mm x 76 mm)<br />
4” x 4-5/8”<br />
(102 mm x 118 mm)<br />
Length<br />
Inches (mm) 10.5” (267 mm) 10.5” (267 mm) 14” (356 mm)<br />
Volume Expansion 40X 16X 16X<br />
Can be Ganged -- Up to 7<br />
Up to 5 in walls<br />
Up to 16 in floors<br />
Can be Lengthened -- 6” (152 mm) increments --<br />
Insert into Cored Hole 2” (51 mm) 4” (102 mm) 6” (153 mm)<br />
Attached to Conduit -- 4” (102 mm) --<br />
Fire Rated in Walls Up to 4 hours Up to 4 hours Up to 4 hours<br />
Fire Rated in Floors -- Up to 4 hours Up to 4 hours<br />
Approx. Max Cable<br />
Capacity<br />
Pathways, Installation Options,<br />
25 + 120 + 244 +<br />
Approx. Max Cable<br />
Capacity (Ganged)<br />
Approx. Max Cable<br />
-- 840 + 1,220 +<br />
Capacity (Grid) -- -- 3,904 + in floors<br />
Cable capacity estimates are based upon using CAT5. Cable diameters vary widely<br />
by manufacturer. Consult STI’s cable estimator online <strong>for</strong> accurate estimates.<br />
www.stifirestop.com/ezpath<br />
Toll Free Technical Support - 1-800-992-1180
and accessories<br />
Series 22 - Pathway Installation Kit<br />
Series 22 is designed <strong>for</strong> new or existing cable installations through walls (only)<br />
up to 9 in. (230 mm) thick and holds up to 24 CAT 5E cables. Pathway can be<br />
mounted as a single unit in either a 2 in. (51 mm) round or a 1.5 in. (38 mm) x<br />
1.5 in. (38 mm) square opening.<br />
Series 33 - Pathway<br />
tCat.<br />
No.<br />
eZD22<br />
This item does not offer wallplates separately.<br />
The Series 33 Pathway is designed <strong>for</strong> new or existing cable installations up to 9 in. (229 mm) thick walls or floors.<br />
Series 33 pathway holds up to 120 CAT 5E cables and can be ganged <strong>for</strong> additional capacity. A wide variety of<br />
accessories easily adapt 33 Series Pathways to a broad range of applications.<br />
tCat.<br />
No.<br />
eZD33FWS<br />
Series 33 - Installation Options<br />
Cat. No.<br />
eZDP133CWK<br />
• Available in semi-custom colors.<br />
• Sold as a complete kit or as individual devices.<br />
• Pathway kits include pathway, wall plates, gaskets, labels, required<br />
set screws and allen key.<br />
• See installation options (p. 5-8) <strong>for</strong> available configurations.<br />
A choice of two wall plate designs are available <strong>for</strong> installing a single Series 33 pathway through<br />
finished walls.<br />
Circular Wall Plate Kits allow a single Series 33 Pathway to be installed<br />
in a 4 in. (102 mm) round opening or 3 in. (76 mm) x 3 in. (76 mm)<br />
square opening.<br />
t<br />
Cat. No.<br />
eZP133CW<br />
Square Wall Plate Kits allow a single Series 33 Pathway to be<br />
installed in a 3 in. (76 mm) x 3 in. (76 mm) square opening.<br />
Cat. No.<br />
eZDP33FWS<br />
t<br />
Pathway only<br />
t<br />
t<br />
Without Pathway<br />
Cat. No.<br />
eZP133W<br />
Without Pathway<br />
Visit us on the web - www.stifirestop.com<br />
5
6<br />
Cat. No.<br />
eZDP233GK<br />
t<br />
Cat. No.<br />
eZDP333GK<br />
t<br />
Cat. No<br />
eZDP433GK*<br />
t<br />
Cat. No.<br />
eZDP433GK-C*<br />
t<br />
*Optional Stud Attachment<br />
Pathways, Installation Options,<br />
Series 33 - Multiple Pathway Installation Options<br />
Using EZ-Path ® Multi-Gang plates, Series 33 pathways can be grouped <strong>for</strong> additional capacity and cable<br />
organization.<br />
The Two Gang Kit is designed to allow two Series 33 Pathways to be installed in a 3 in. (76 mm) x<br />
6” (152 mm) opening. Installs in finished wall.<br />
t Cat. No.<br />
eZP233W<br />
The Three Gang Kit is designed to allow three Series 33 Pathways to be installed in a 3 in. (76 mm)<br />
x 9 in. (229 mm) opening. Installs in finished wall.<br />
For a price premium, Series 33 Pathways can be ordered in a range of custom colors.<br />
t Cat. No.<br />
eZP333W<br />
Four Gang Kit is designed to allow four Series 33 Pathways to be installed in a 3 in (76 mm) x 12 in<br />
(305 mm) opening. Attachment plates can be fastened to studs spaced 16 in (406 cm) O.C. as the<br />
wall is being built or they can be installed in finished walls.<br />
t Cat. No<br />
eZP433W<br />
Seven Gang Kit is designed to allow seven Series 33 Pathways to be installed in a 3 in (76 mm)<br />
x 21 in (533 mm) opening. Attachment plates can be fastened to studs spaced 24 in (610 mm)<br />
O.C. as the wall is being built or they can be installed in finished walls.<br />
Cat. No.<br />
eZDP733GK* t Cat. No.<br />
eZP733W<br />
t<br />
Ordering Details<br />
• Check factory <strong>for</strong> color availability and lead times.<br />
• Sold with four pathways (ORANGE, BLUE, YELLOW, and WHITE)<br />
and four gang mounting plate pack.<br />
Without Pathway<br />
Without Pathway<br />
Without Pathway<br />
NOTe: Optional mounting screws must be purchased separately.<br />
Without Pathway<br />
These multi-gang kits have optional attachment holes that<br />
allow them to be fastened directly to internal wall framing <strong>for</strong><br />
greater support.<br />
As an option, the wall frames can be attached to the studs<br />
and the pathways can be installed as the wall is being built.<br />
Toll Free Technical Support - 1-800-992-1180
and accessories<br />
Series 33 - Specialty Installation Options<br />
Uniquely engineered attachment plates provide quick and easy mechanical attachment of<br />
Series 33 pathways to a variety of common conditions.<br />
Cat. No.<br />
eZDP133FK<br />
t<br />
New or Existing Cable Installations in 4” Sleeves or Conduit<br />
Cat. No.<br />
eZDP133CaK<br />
t t<br />
Cat. No.<br />
eZDP33WR<br />
EZ-PATH ® devices split apart <strong>for</strong><br />
old work!<br />
New or Existing Cable Installations Through Floors Using Core Drilled Opening<br />
The Kick-In Floor Kit installs a Series 33 Pathway into a 4 in. (102 mm) core drilled round opening.<br />
Built-in, self-locking fasteners securely wedge the pathway into the concrete. Installation<br />
is simple! Insert plate into opening. Insert pathway into plate and tighten set screws. Plate is<br />
locked in place! No fasteners and no sealant required!<br />
The Conduit attachment Kit installs a Series 33 Pathway within a 4 in. (102 mm)<br />
sleeve or conduit. The split plate design allows <strong>for</strong> installation in both new and existing<br />
cabling applications.<br />
Previously Installed Cables Through Walls and Oversized Openings Through Walls<br />
t Cat. No.<br />
eZP133K<br />
t Cat. No.<br />
eZP133Ca<br />
Retrofit/Repair Wall Kit is a multi-purpose split mounting plate designed to facilitate<br />
EZ-Path ® installations around previously installed cables or in new or existing cabling<br />
applications where a large opening or opposing offset openings have been created in<br />
either gypsum board or masonry block walls. The assembled two-piece plates measuring<br />
8 in. x 10 in. (203 mm x 254 mm) can be rotated independently of each other in<br />
90° increments to cover irregular or offset openings. Plates are designed to overlap the<br />
wall openings on both sides by 1 in. (25 mm) in all directions, permitting fasteners to be<br />
attached solidly to undamaged, structurally intact wall surfaces.<br />
Visit us on the web - www.stifirestop.com<br />
Without Pathway<br />
Without Pathway<br />
t Cat. No.<br />
eZP133R<br />
Without Pathway<br />
7
8<br />
Series 33 - Accessories<br />
The extension module attaches to the end of a Series 33 Pathway increasing the effective<br />
length <strong>for</strong> thicker barriers. A single extension can be mounted on one end to increase the<br />
pathway length by 6 in. (152 mm). Extensions can be mounted at both ends to increase<br />
Pathway length by 12 in. (305 mm). Extensions are designed to work with all other<br />
accessories.<br />
• Sold as individual devices.<br />
t<br />
Cat. No.<br />
eZD33e<br />
Positioning Clamps are used to position and secure pathways in applications where standard<br />
wall plates will not be used and the device will be either backfilled or caulked into an opening.<br />
• Sold in pairs.<br />
• Caulk and sealant products sold separately.<br />
t Cat. No.<br />
eZP133PC<br />
Radius Control modules (RCm) snap into the ends of pathways and provide a 1 in. (25 mm)<br />
minimum bend radius <strong>for</strong> cables. UL94 V-O flame retardant, impact resistant polycarbonate,<br />
RCMs support cable bundles at 100% rated loading. Insertion slots are provided <strong>for</strong> support<br />
ties (not included).<br />
• Sold in pairs.<br />
t<br />
Cat. No.<br />
RCm33<br />
Pathways, Installation Options,<br />
Toll Free Technical Support - 1-800-992-1180
and accessories<br />
Series 44 - Pathway<br />
Designed <strong>for</strong> new or existing cable installations up to 10<br />
in. (250 mm) thick through walls or floors, the eZ-Path ®<br />
Series 44 pathway holds up to 240 CAT 5E cables.<br />
Pathways can be ganged <strong>for</strong> additional capacity.<br />
Cat. No.<br />
eZD44<br />
Series 44 - Pathway Installation Options<br />
Cat. No.<br />
eZDP44<br />
Cat. No.<br />
eZDP144FK<br />
t<br />
t<br />
t<br />
Pathway Only<br />
Install a Single Series 44 Pathway Through Finished Walls<br />
Single Wall Plate Kit is designed to allow a single Series 44 Pathway to be<br />
installed in a 6 in. (152 mm) round opening or 4-1/8 in (105 mm) x 4-5/8 in<br />
(118 mm) opening.<br />
Install a Single Series 44 Pathway Through Floors<br />
Cat. No.<br />
eZP144W<br />
The Split Floor Plate Kit is designed to allow a single Series 44<br />
Pathway to be installed in a 6 in. (152 mm) round opening or<br />
4-1/8 in. (105 mm) x 4-5/8 in. (118 mm) opening. Split plate is<br />
designed to permit use with previously installed cables.<br />
NOTE: Suitable concrete fasteners must be purchased<br />
separately.<br />
Multiple or Ganged Pathway Installations<br />
multi-Gang Wall Brackets are designed to allow 1 to 5 Series 44 Pathways<br />
to be installed in finished walls or as the wall is being built. Plates attach<br />
directly to studs and pathways are installed prior to application of gypsum<br />
board. Brackets are suitable <strong>for</strong> attachment to studs spaced up to 24 in.<br />
(610 mm).<br />
Ordering Details<br />
• Plate packs include plates, gaskets, set screws and labels.<br />
• Purchase Pathways (EZD44) and appropriate fasteners separately.<br />
t<br />
Without Pathway<br />
Visit us on the web - www.stifirestop.com<br />
t<br />
t<br />
Cat. No.<br />
eZP144F<br />
Without Pathway<br />
Cat. No.<br />
eZP544W<br />
9
10<br />
Series 44-PathwayInstallationOptions<br />
Modular Floor Grid System<br />
t<br />
An EZ-Path ® Solution <strong>for</strong> High Volume<br />
Cable Penetrations through Floors<br />
Now there is a bolt-in solution <strong>for</strong> riser<br />
applications that brings the safety and<br />
simplicity of EZ-Path ® to your vertical<br />
cable installations.<br />
The EZ-Path Modular Floor Grid System<br />
can handle literally thousands of cables.<br />
Modular Floor Grid Systems utilize the<br />
high volume, EZ-Path 44 Series Pathways<br />
installed in banks of four to provide your<br />
cabling systems with room to grow.<br />
Sturdy steel grids mount one, two or<br />
four banks of pathways in built-in slots<br />
<strong>for</strong> a total of up to sixteen pathways through a single floor opening. A single bank Floor Grid comes complete with<br />
Pathways. Multi-bank Modular Floor Grids are installed with firestop panels sealing each slot. As additional cable<br />
capacity is required, firestop panels are removed and pathway modules containing four<br />
pathways are installed in each slot.<br />
Single Slot Grid<br />
multi-Slot Grids<br />
Cat. No.<br />
eZG844<br />
Capacity: 8 Pathways<br />
Two (2) EZD444MB<br />
Pathways, Installation Options,<br />
and accessories<br />
t Cat. No.<br />
eZDG444<br />
Capacity: 4 Pathways<br />
Sold complete with grid and pathways.<br />
t<br />
Capacity: 16 Pathways<br />
Four (4) EZD444MB<br />
Floor Frame Only.<br />
<strong>Firestop</strong> panels included to seal unused slots.<br />
Pathway modules ordered separately, shown at right.<br />
Cat. No.<br />
eZG1644<br />
Toll Free Technical Support - 1-800-992-1180<br />
Pathway module<br />
t<br />
Cat. No.<br />
eZD444 mB<br />
Includes<br />
4 Pathways<br />
&<br />
Hanger Brackets<br />
(For use in EZG844 and EZG1644)
UPC<br />
730573-<br />
CaTalOG<br />
NUmBeR DeSCRIPTION<br />
Series 22 eZ-Path ® Fire-Rated Pathway Kits*<br />
Ordering In<strong>for</strong>mation<br />
22, 33, and 44 Series EZPATH® Fire Rated Pathways<br />
*All Kits include appropriate quantity of pathways, wall plates, gaskets, labels, required set screws and an allen key.<br />
**All plate packs include wall plates, gaskets, labels, required set screws and an allen key.<br />
Visit us on the web - www.stifirestop.com<br />
All pathway kits are conveniently packaged with<br />
plates, gaskets and labels <strong>for</strong> installation!<br />
mIN. QTy/<br />
CaSe QTy.<br />
00022 EZD22 Series 22 - Fire-Rated Pathway Kit 6<br />
Series 33 eZ-Path ® Fire-Rated Pathway, Kits, accessories and Plate Packs*<br />
00004 EZD33FWS Series 33 - Fire-Rated Pathway Device 6<br />
00034 EZDP33FWS Series 33 - Square Kit - Device with square wall plate pack 4<br />
00035 EZDP133CWK Series 33 - Circular Kit - Device with circular wall plate pack 1<br />
00005 EZD33E Series 33 - Extension Module 1<br />
00533 EZDP33WR Series 33 - Retro-Fit Kit - Device with retro-fit wall plate pack 1<br />
00835 EZDP133FK Series 33 - Kick in Kit - Device with kick-in plate pack 1<br />
00235 EZDP233GK Series 33 - Two-Gang Kit - Two (2) Devices with two-gang plate pack 1<br />
00335 EZDP333GK Series 33 - Three-Gang Kit - Three (3) Devices with three-gang plate pack 1<br />
00435 EZDP433GK Series 33 - Four-Gang Kit - Four (4) Devices with four-gang plate pack 1<br />
00436 EZDP433GK-C<br />
Series 33 - Color Coded Four-Gang Kit<br />
Four (4) Devices (1-orange, 1-blue, 1-yellow, 1-white) with four-gang plate pack<br />
1<br />
00735 EZDP733GK Series 33 - Seven-Gang Kit - Seven (7) Devices with seven-gang plate pack 1<br />
00036 EZDP133CAK Series 33 - Conduit Attachment Kit-Device with conduit attachment plate pack 1<br />
00137 EZP133CW Series 33 - Circular Wall Plate Pack 1<br />
00133 EZP133W Series 33 - Single Square Wall Plate Pack 1<br />
00233 EZP233W Series 33 - Double Wall Plate Pack 1<br />
00333 EZP333W Series 33 - Triple Wall Plate Pack 1<br />
00433 EZP433W Series 33 - Four-Gang Plate Pack 1<br />
00733 EZP733W Series 33 - Seven-Gang Plate Pack 1<br />
00135 EZP133PC Series 33 - One Pair (2) Positioning Clamps 1<br />
00833 EZP133K Series 33 - Single Kick-In Plate Pack - (For use with floor applications) 6<br />
00535 EZP133R Series 33 - Retro-Fit Mounting Plate Pack 1<br />
00138 EZP133CA Series 33 - Conduit Attachment Plate Pack 1<br />
00933 RCM33 Series 33 - One Pair (2) Radius Control Modules 1<br />
Series 44 eZ-Path ® Fire-Rated Pathway, Kits, Grid assemblies, and Plate Packs*<br />
00007 EZD44 Series 44 - Fire-Rated Pathway Device 4<br />
00044 EZDP44 Series 44 - Fire-Rated Pathway Kit - Device with single wall plate pack 1<br />
00045 EZDP144FK Series 44 - Floor Kit - Device with floor plate pack 1<br />
00444 EZDG444 Series 44 - Single Bank Floor Grid - Four (4) Devices with floor frame 1<br />
00048 EZD444MB Series 44 - Single Bank of Devices - Four (4) Devices with hanger bracket 1<br />
00845 EZDG844 Series 44 - Multi-slot Frame Kit <strong>for</strong> 8 Pathways - (Includes eight (8) Series 44 devices with EZG844) 1<br />
00645 EZDG1644 Series 44 - Multi-slot Frame Kit <strong>for</strong> 16 Pathways - (Includes sixteen (16) Series 44 devices with EZG1644) 1<br />
00144 EZP144W Series 44 - Single Wall Plate Pack 1<br />
00544 EZP544W Series 44 - Multi-Gang Wall Plate Pack 1<br />
00834 EZP144F Series 44 - Split Floor Plate Pack 1<br />
00844 EZG844 Series 44 - Multi-Slot Frame <strong>for</strong> Eight (8) Pathways 1<br />
00644 EZG1644 Series 44 - Multi-Slot Frame <strong>for</strong> Sixteen (16) Pathways 1<br />
11
EZ Path ® is a registerd trademark of Specified Technologies Inc.<br />
200 Evans Way | Somerville, NJ 08876 USA<br />
Toll Free: 800-992-1180 | Fax: (908) 526-9623<br />
E-mail: sales@stifirestop.com<br />
www.stifirestop.com<br />
© Copyright 2008. All rights reserved.<br />
ZSTI3154 Rev. 03/2008
1. Product Name<br />
SpecSealª <strong>Firestop</strong> <strong>Products</strong><br />
EZ-Path« Fire Rated Pathway<br />
Pensilª Silicones<br />
Water Based <strong>Firestop</strong> and Joint Sealants and<br />
Sprays<br />
<strong>Firestop</strong> Putty and Putty Pads<br />
<strong>Firestop</strong> Mortar<br />
<strong>Firestop</strong> Pillows<br />
<strong>Firestop</strong> Collars and Intumescent Wrap Strips<br />
2. Manufacturer<br />
Specified Technologies, Inc. (STI)<br />
200 Evans Way<br />
Somerville, NJ 08876<br />
(800) 992-1180<br />
(908) 526-8000<br />
Fax: (908) 526-9623<br />
E-mail: specseal@stifirestop.com<br />
www.stifirestop.com<br />
3. Product Description<br />
BASIC USE<br />
These products are used solely or in combination<br />
to construct firestop systems effective in<br />
sealing through-penetrations, construction joints<br />
and high traffic openings against the spread of<br />
fire, smoke or hot gasses. A wide range of tested<br />
systems is available <strong>for</strong> standard constructions<br />
and penetrants with ratings up to 4 hours.<br />
These products and systems are suitable <strong>for</strong><br />
sealing electrical, plumbing, mechanical, or<br />
data/communications penetrations, including:<br />
Pipes, Conduits or Ducts<br />
Metallic Nonmetallic<br />
Insulated<br />
Cables<br />
Telephone Power<br />
Data and Control<br />
Cable Trays and Bus Ducts<br />
Steel Aluminum and Copper<br />
<strong>Construction</strong> <strong>Joints</strong><br />
COMPOSITION & MATERIALS<br />
STI <strong>Firestop</strong> <strong>Products</strong> are a unique combination<br />
of passive and intumescent (expands<br />
when heated) materials. <strong>Products</strong> utilizing this<br />
expansion mechanism exhibit unusually fast<br />
and aggressive, highly directionalized expansion.<br />
Water Based Sealants<br />
Series SSS, LCI, LC and ES Sealants are latex<br />
based, water resistant, flexible sealants. These<br />
products are available in a multi-viscosity<br />
grade suitable <strong>for</strong> caulking, troweling, pumping<br />
or bulk loading.<br />
Series SSS is a highly intumescent product<br />
well-suited <strong>for</strong> a wide range of combustible<br />
and noncombustible penetrants<br />
Series LCI is an intumescent product custom<br />
suited <strong>for</strong> a specific range of combustible<br />
and noncombustible penetrants<br />
SPEC-DATA TM and MANU-SPEC TM are registered trademarks of Reed Elsevier Inc. The ten part SPEC-DATA <strong>for</strong>mat con<strong>for</strong>ms to the editorial style<br />
of The <strong>Construction</strong> Specifications Institute and is used with their permission. The manufacturer is responsible <strong>for</strong> technical accuracy. ©2004 Reed <strong>Construction</strong> Data. All Rights Reserved.<br />
FIRESTOPPING 07840<br />
Specified Technologies, Inc.<br />
Series LC is a nonintumescent sealant<br />
designed as an economical and effective<br />
solution <strong>for</strong> noncombustible penetrants<br />
Series ES is a highly elastomeric and nonhalogenated,<br />
latex based material<br />
designed to provide passive smoke and<br />
fire protection and reduces sound transmission<br />
in construction joints<br />
<strong>Firestop</strong> Putty (Series SSP) and Putty Pads<br />
This nonhardening putty is based upon a<br />
highly water resistant liquid rubber matrix. Its<br />
unique combination of fillers yields a product<br />
that is at once soft and pliable yet extremely<br />
adhesive.<br />
TABLE 1: FIRESTOP PRODUCT SIZES & CATALOG NUMBERS<br />
Water Based Sealants & Spray<br />
10.1 Oz. (19 cu. in.) Caulk Tube SSS100 LC150 LCI300 ES100<br />
29 Oz. (52 cu. in.) Caulk Tube SSS129 LC129 LCI329 ES129<br />
20 Oz. (36 cu. in.) Sausage SSS120 LCI320 ES120<br />
2 Gal. (462 cu. in.) Poly Pail SSS102<br />
5 Gal. (1,155 cu. in.) Poly Pail<br />
Silicone Sealants<br />
SSS105 LC155 LCI305 ES105 AS105 AS205<br />
10.3 Oz. (18.3 cu. in.) Caulk Tube PEN300<br />
5 Gal. (1,155 cu. in.) Poly Pail PEN305 PEN305SL<br />
<strong>Firestop</strong> Putty<br />
2 Lb. (36 cu. in.) Bar SSP100<br />
7.25" X 7.25" X 3/16" Pad SSP4S<br />
9.00” X 9.00” X 3/16” Pad<br />
<strong>Firestop</strong> Mortar<br />
SSP9S<br />
22 Lb. (1,325 cu. in.*) 6 Gal.** Poly Pail SSM106<br />
22 Lb. (1,325 cu. in.*) Multi-Wall Bag<br />
<strong>Firestop</strong> Pillows<br />
SSM22B<br />
1”(2.54cm) x 4” (10.2cm) x 9” (22.9cm) SSB14<br />
2”(5.1cm) x 4” (10.2cm) x 9” (22.9cm) SSB24<br />
2”(5.1cm) x 6” (15.24cm) x 9” (22.9cm) SSB26<br />
3”(7.6cm) x 6” (15.24cm) x 9” (22.9cm)<br />
2 Part Silicone Foam<br />
SSB36<br />
100 Lb. Kit (50# Part A, 50# Part B)<br />
Wrap Strips<br />
PEN200<br />
Red 1/4" X 1-1/2" X 12' Roll SSWRED<br />
Blue 3/16" X 2" X 12' Roll<br />
Restraining Collar<br />
SSWBLU SSWBLU2<br />
25' Roll (28 gauge galvanized steel)<br />
Molded <strong>Firestop</strong> Collars<br />
SSWRC SSWRC2 WSC-8 WSC-8RED<br />
For 1.5" Trade Size Pipe or Conduit SSC151 LCC150<br />
For 2" Trade Size Pipe or Conduit SSC202 LCC200<br />
For 3" Trade Size Pipe or Conduit SSC301 LCC300<br />
For 4" Trade Size Pipe or Conduit SSC400 LCC400<br />
For 6" Trade Size Pipe or Conduit SSC600<br />
EZ-Path Fire Rated Pathway and Accessories<br />
Single Device, full kit includes wall plates & labels EZDP33FWS<br />
Single Device, retrofit kit includes wall plates & labels EZDP33WR<br />
Fire Rated Pathway Device EZD33FWS<br />
One pair (2) single wall plates with wall labels EZP133W<br />
One pair (2) double wall plates with wall labels EZP233W<br />
One pair (2) triple wall plates with wall labels EZP333W<br />
One pair (2) positioning clamps EZP133PC<br />
* Average volume of mixed mortar.<br />
** Packed to weight in 6 Gal. pail to allow headroom <strong>for</strong> mixing in the pail.
PRIMARY USES:<br />
SSS Intumescent <strong>Firestop</strong> Sealant<br />
• Through-Penetration <strong>Firestop</strong>s. Combustible and noncombustible.<br />
All constructions. UL Classified & FM Approved.<br />
LCI Intumescent <strong>Firestop</strong> Sealant<br />
• Through-Penetration <strong>Firestop</strong>s. Combustible and noncombustible.<br />
Most <strong>Construction</strong>s. UL Classified & FM Approved.<br />
LC Endothermic <strong>Firestop</strong> Sealant<br />
• Through-Penetration <strong>Firestop</strong>s. Primarily noncombustible.<br />
Most <strong>Construction</strong>s. UL Classified.<br />
ES Elastomeric Joint Sealant<br />
• <strong>Construction</strong> <strong>Joints</strong> – UL Classified<br />
PHYSICAL PROPERTIES<br />
Property SSS LCI LC ES<br />
Color Red Pale Red Blue Pale Blue<br />
Density (Lbs./Gal) 9.4 ± .4 9.0 ± .4 9.4 ± .4 10.3 ± .4<br />
% Solids 80 ± 2 80 ± 2 80 ± 2 66 ± 2<br />
pH 8.3 ± .5 9.0 8.3 ± .5 7.5 ± .5<br />
Flame Spread1 0 0 0 5<br />
Smoke Development<br />
Water Resistance<br />
10 5 5 5<br />
2<br />
Excellent Excellent Excellent Excellent<br />
Sag/Slump (ASTM C639)
PENSIL ® 300 SEALANT<br />
PRIMARY USES:<br />
• <strong>Construction</strong> <strong>Joints</strong><br />
• Through Penetrations<br />
JOINT TYPES:<br />
• Expansion<br />
• Seismic<br />
• Control<br />
• Head-of-Wall<br />
• Safing or Perimeter<br />
Color Concrete<br />
Flame Spread 1 5<br />
Smoke Development 1 45<br />
Hardness Shore 1 , ASTM D2240 25<br />
Tensile Strength ASTM D412 270<br />
Peel Strength ASTM C794-80 55 ppi<br />
Movement Capability ASTM C719 ±50%<br />
Stress @ 50% Extension 2 35 lbs/in<br />
Tooling Time 30 Minutes<br />
Tack Free Time, ASTM C619 5-9 Hours<br />
Sag: Slump (NS Grade) ASTM C639 0.1"<br />
Ozone & UV Resistance 3 Excellent<br />
Storage Warranty Period 4 12 months<br />
1 @14% coverage, ASTM E84<br />
2 ½"×½" Bead<br />
3 Weatherometer Twin Arc<br />
4 From date of shipment if stored in original<br />
unopened container at 80°F (27°C).<br />
sist of a monolithic, mineral fiber core sealed in<br />
a water resistant, intumescent membrane.<br />
Under fire conditions, this membrane is capable<br />
of expanding the pillow’s volume by up to 250%.<br />
A tough nonirritating, heat sealed fire retardant<br />
poly bag further protects the intumescent core<br />
and makes the installation clean and simple.<br />
<strong>Firestop</strong> Collars (Series SSC and LCC)<br />
Series SSC Collars are factory manufactured<br />
products specifically trade sized <strong>for</strong> pipes<br />
from 1 1/2" - 6" (38 - 152 mm). Series LCI Collars<br />
are designed <strong>for</strong> pipes up to 4" (101 mm).<br />
Systems have been tested <strong>for</strong> most pipe<br />
materials, including:<br />
Polyvinyl chloride (PVC), both solid and<br />
foam core<br />
Chlorinated polyvinyl chloride (CPVC)<br />
Fire retardant polypropylene (FRPP)<br />
PRIMARY USES:<br />
• <strong>Construction</strong> <strong>Joints</strong><br />
• Through Penetrations<br />
JOINT TYPES:<br />
• Expansion<br />
• Seismic<br />
• Control<br />
• Head-of-Wall<br />
• Safing or Perimeter<br />
Color Pale Blue<br />
Odor Mild Latex<br />
Lbs/Gal 12<br />
Coverage 12.8 sq.ft./gal@1/8"<br />
0.31sq.m/l@3.2mm<br />
pH 7.5<br />
Solvent Content None<br />
Flame Spread 1 0<br />
Smoke Development 1 25<br />
Movement Capability ±18.75%<br />
Drying Time - Tack Free 2 2 Hours<br />
Drying Time - Dry-Through 2 24-48 Hours<br />
In-Service Temp.
FIRESTOP PILLOWS<br />
PRIMARY USES:<br />
• Application Requiring Easy<br />
Retrofit Through Small To Medium<br />
Openings – All <strong>Construction</strong>s.<br />
PENETRANTS:<br />
• Cable Trays<br />
• Electrical, Data or Telephone Cable<br />
• Electrical Conduits<br />
• Innerducts<br />
• Piping: Fan Coil Units<br />
PHYSICAL PROPERTIES:<br />
Color Red<br />
Nominal Density 4 PCF (53 kg/m 3 )<br />
Flammability* V-0<br />
Compression** 25%-33%<br />
Expansion Begins 230°F.<br />
In-Service Temp. >130°F.<br />
* Outer poly bag<br />
** As installed<br />
instructions<br />
Water based sealants are subject to freezing<br />
and must be installed and stored at<br />
minimum 40 degrees F (4 degrees C) temperatures<br />
Water based sealants and wet mortar are<br />
conductive until dry and must not be<br />
applied directly to, or adjacent to, energized<br />
electrical conductors<br />
All products referenced herein may be subject<br />
to additional limitations or requirements.<br />
Consult individual product safety<br />
data sheets, product data sheets and<br />
STI Product and Application Guide <strong>for</strong><br />
additional pertinent in<strong>for</strong>mation<br />
4. Technical Data<br />
APPLICABLE STANDARDS<br />
ASTM International<br />
FIRESTOP MORTAR<br />
PRIMARY USES:<br />
• Fill Down Medium To Large<br />
Openings – Concrete Or Masonry<br />
<strong>Construction</strong> For A Wide Variety Of<br />
Penetrants.<br />
PENETRANTS:<br />
• Metallic Pipes.<br />
• Cable Trays, Bus Duct.<br />
• Electrical Or Telephone Cable.<br />
• Certain Nonmetallic Pipes.<br />
PHYSICAL PROPERTIES:<br />
Color Pale Red<br />
Flame Spread 0<br />
Smoke Development 1,000°F<br />
Moisture Resistance Excellent<br />
UL 1978 First Edition of the Standard <strong>for</strong><br />
Safety <strong>for</strong> Grease Ducts<br />
UL 2079 Standard <strong>for</strong> Tests <strong>for</strong> Resistance of<br />
Building Joint Systems<br />
Over 625 tested systems are presently published<br />
in applications ranging from throughpenetration<br />
firestops to fire-rated joint seals.<br />
Through Penetration <strong>Firestop</strong> Systems are<br />
based upon tests conducted in accordance<br />
with ASTM E814. Additionally, appropriate<br />
products and systems are Factory Mutual<br />
Research Corporation (FM) approved<br />
SpecSeal Joint Sealants and Spray have<br />
been tested in a wide variety of joint configurations<br />
with ratings up to 4 hours. Joint<br />
designs have been tested to the<br />
requirements of UL 2079, ASTM E1966 and<br />
ASTM E1399
FIRESTOP COLLARS<br />
PRIMARY USES:<br />
• Plastic Pipes up to 6" Through All<br />
<strong>Construction</strong>s.<br />
PENETRANTS:<br />
• PVC, CPVC Up To 6".<br />
• FR Polypropylene Up To 6".<br />
• ABS & PVC Foam Core Up To 4".<br />
• Two Wall Thicknesses For<br />
Smaller & Larger Annulus.<br />
PHYSICAL PROPERTIES:<br />
Shell <strong>Construction</strong> 22 Gauge<br />
Galvanized Steel<br />
Intumescent Insert Molded One Piece<br />
Expanded Volume 6-24X<br />
Expansion Begins 250°F<br />
Expansion Ends >1,000°F<br />
Moisture Resistance Excellent<br />
5. Installation<br />
PREPARATORY WORK<br />
Proper adhesion and bonding of all sealants,<br />
coatings and mortars require that all contact<br />
surfaces be free of oil, loose dirt, rust or scale.<br />
Forming materials may be required in some<br />
cases to retain fill materials and may contribute<br />
to fire ratings.<br />
METHODS<br />
Consult product data sheets <strong>for</strong> individual<br />
products <strong>for</strong> more complete details concerning<br />
the suggested installation methods and<br />
limitations of these products.<br />
Sealants<br />
Sealants can be applied by troweling, using a<br />
standard mason’s trowel or a common putty<br />
knife. Sealants can be caulked in place using<br />
standard 1/10 gal (0.38 L) caulk tubes or by<br />
bulk loading guns directly from poly pail.<br />
Sealant may be pumped or power caulked<br />
using airless pumps designed <strong>for</strong> this purpose.<br />
STI <strong>Firestop</strong> <strong>Products</strong><br />
Elastomeric Spray<br />
Coating is applied to construction surfaces<br />
using high volume, airless spray equipment.<br />
Consult manufacturer <strong>for</strong> equipment recommendations<br />
and full installation instructions.<br />
Putty<br />
Standard method of application is by hand<br />
packing. While bundled cables have been<br />
successfully fire tested, spacing of cables to<br />
allow placement of putty into interstices is<br />
required to ensure a tight smoke seal.<br />
Mortar<br />
Mortar can be placed using standard<br />
mason’s techniques and tools and may be<br />
pumped using an air operated double<br />
diaphragm pump or a plastering pump.<br />
Combustible penetrants can be protected<br />
using SpecSealª Wrap Strips installed prior to<br />
placing mortar (consult installation instructions).<br />
Contact surfaces should be dampened<br />
with clean water to enhance adhesion.<br />
<strong>Firestop</strong> Pillows<br />
<strong>Firestop</strong> pillows are installed by stacking and<br />
compressing into the opening lengthwise to<br />
<strong>for</strong>m a 9" (229 mm) thick seal. To better con<strong>for</strong>m<br />
to cable bundle and completely fill the<br />
opening, pillows may be installed flat or<br />
upright on edge.<br />
<strong>Firestop</strong> Collars<br />
<strong>Firestop</strong> collars are designed to be installed<br />
SPEC-DATA TM and MANU-SPEC TM are registered trademarks of Reed Elsevier Inc. The ten part SPEC-DATA <strong>for</strong>mat con<strong>for</strong>ms to the editorial style<br />
of The <strong>Construction</strong> Specifications Institute and is used with their permission. The manufacturer is responsible <strong>for</strong> technical accuracy. ©2004 Reed <strong>Construction</strong> Data. All Rights Reserved.<br />
FIRESTOPPING 07840<br />
Specified Technologies, Inc.<br />
on the external surface of walls or floors.<br />
Collars provide appropriate fastening<br />
method <strong>for</strong> closure around the pipe. Installer<br />
provides appropriate fasteners <strong>for</strong> attaching<br />
to the wall or floor surface. Collar is required<br />
at the underside of floors and on both sides of<br />
walls.<br />
Wrap Strips<br />
Wrap strips are designed to be installed by<br />
manually wrapping around the penetrant<br />
being protected. In “tuck-in” applications,<br />
wrap strip is secured to the penetrant using a<br />
steel tie wire or foil tape. A galvanized sheet<br />
metal restraining collar is available from the<br />
manufacturer <strong>for</strong> surface mounted applications.<br />
Installation methods have been developed<br />
<strong>for</strong> steel deck floors or <strong>for</strong> sleeved penetrations<br />
that permit the collars to be installed<br />
from the top surface of the floor and suspended<br />
down into the opening.<br />
28 gauge galvanized steel restraining collar<br />
is available from the manufacturer in 25'<br />
(8 m) long rolls <strong>for</strong> applications up to and<br />
including 4" (102 mm) plastic pipes. Individually<br />
sized restraining collars in required heavier<br />
gauge metals <strong>for</strong> larger plastic pipes are also<br />
available.
EZ-Path Fire Rated Pathways<br />
EZ-Path is designed <strong>for</strong> easy installation in<br />
walls. Tested and approved cable capacities<br />
range from 0 to 100% visual fill. EZ-Path, when<br />
installed with available wall plates, is designed<br />
<strong>for</strong> new cable installations. EZ-Path’s split body<br />
design also allows the device to be easily disassembled<br />
and installed around previously<br />
installed cables in existing construction.<br />
6. Availability & Cost<br />
STI <strong>Firestop</strong> <strong>Products</strong> are available from<br />
authorized STI distributors throughout the<br />
United States. STI warehouses these products<br />
in New Jersey and at strategic regional locations<br />
ensuring ready availability and prompt<br />
delivery. These products are designed to<br />
provide an economical installed cost and<br />
competitive pricing (at suggested resale).<br />
Pricing is available from local distributors. For<br />
the name of the local sales representative<br />
and/or distributor, call toll-free (800) 992-1180<br />
or go online to www.stifirestop.com.<br />
7. Warranty<br />
Specified Technologies, Inc., manufactures its<br />
goods in a manner to be free of defects. All<br />
such products delivered to the Buyer are warranted<br />
to comply with physical and chemical<br />
specifications and description <strong>for</strong> a period of<br />
1 year or such other as stated in the product<br />
data sheet. Specified Technologies, Inc., does<br />
not warrant the workmanship with which its<br />
products are applied by others and obligates<br />
itself to the Buyer only to replace or, at its<br />
option, refund the purchase price of any such<br />
product found to be defective. The liability of<br />
Specified Technologies, Inc., whether based<br />
on its warranties, contract or otherwise, shall in<br />
no case exceed the purchase price <strong>for</strong> the<br />
Specified Technologies, Inc., product and<br />
does not include incidental or consequential<br />
damages.<br />
LIMITATIONS & EXCLUSIONS<br />
The <strong>for</strong>egoing shall constitute the sole and<br />
exclusive remedy of the buyer and the sole<br />
and exclusive liability of Specified<br />
Technologies, Inc. The warranties stated in this<br />
paragraph are in lieu of all other warranties<br />
written or oral, expressed or implied, including<br />
any warranties of merchantability or fitness of<br />
purpose.<br />
8. Maintenance<br />
INSPECTION<br />
Installations should be periodically inspected<br />
<strong>for</strong> subsequent damage. Any damage should<br />
be repaired using the original product and<br />
approved design.<br />
RETROFIT<br />
When adding or removing penetrants, care<br />
should be taken to minimize damage to the<br />
seal. Reseal using appropriate materials and<br />
methods as per the requirements of the<br />
altered installation.<br />
9. Technical Services<br />
Product data sheets are available <strong>for</strong> each<br />
product as well as UL Systems or CAD (.dwg)<br />
compatible files suitable <strong>for</strong> submittal or<br />
design purposes. STI provides toll-free technical<br />
support to assist in product selection and<br />
appropriate installation design.<br />
10. Filing Systems<br />
First Source«<br />
Additional in<strong>for</strong>mation is available from the<br />
manufacturer upon request.<br />
SPEC-DATA TM and MANU-SPEC TM are registered trademarks of Reed Elsevier Inc. The ten part SPEC-DATA <strong>for</strong>mat con<strong>for</strong>ms to the editorial style<br />
of The <strong>Construction</strong> Specifications Institute and is used with their permission. The manufacturer is responsible <strong>for</strong> technical accuracy. ©2004 Reed <strong>Construction</strong> Data. All Rights Reserved.<br />
FIRESTOPPING 07840<br />
Specified Technologies, Inc.
FIRESTOPPING<br />
<strong>Products</strong> <strong>for</strong> Electrical and Datacom <strong>Applications</strong><br />
The Industry’s Most Complete Line of <strong>Firestop</strong> <strong>Products</strong> <strong>for</strong><br />
High-Traffic TM and Permanent <strong>Firestop</strong>ping <strong>Applications</strong><br />
www.stifirestop.com
Specified TechnologieS inc.<br />
Specified Technologies, Inc. (STI) is an<br />
industry leader solely committed to<br />
the development of innovative, reliable<br />
firestopping solutions that help stop the<br />
spread of fire, smoke and toxic fumes.<br />
For over 25 years, our management<br />
team has worked hand in hand with the<br />
construction industry to create innovative<br />
firestop solutions <strong>for</strong> all types of new<br />
construction and retrofit applications.<br />
We offer the broadest range of UL ®<br />
Classified Systems — more than any<br />
other manufacturer. We keep material<br />
requirements to a minimum and we design<br />
systems with the installer in mind. The<br />
result is less labor and significantly lower<br />
installed costs.<br />
2<br />
innovative firestop Solutions <strong>for</strong><br />
electrical and datacom <strong>Applications</strong><br />
Service, Technology, Innovation<br />
Polymer jacketed cables found in datacom applications are considered to be combustible.<br />
Combustible penetrants pose a potentially greater risk than noncombustible<br />
penetrants as they may melt or burn out causing openings to develop within<br />
a firestop. Intumescent firestop technology (expands with heat) is required to compensate<br />
<strong>for</strong> the loss of mass when jackets burn away. Additionally, while some datacom<br />
firestop installations are permanent, future growth requirements to accommodate<br />
cable moves, adds, and changes will likely require a retrofittable system. The<br />
materials and methods selected to seal these penetrations must be chosen with<br />
these per<strong>for</strong>mance requirements in mind.<br />
High-Traffic <strong>Firestop</strong> <strong>Products</strong><br />
Retrofittable product choice is generally driven by penetration opening size and<br />
cable change frequency. At STI we refer to these retrofittable datacom penetrations<br />
as High-Traffic openings. The need <strong>for</strong> communications and data cabling<br />
in today’s buildings continues to explode. Openings made to accommodate the<br />
building’s original cable requirements quickly fill up, making cable moves, adds,<br />
and changes a major task. STI engineers its High-Traffic products from the ground<br />
up to meet your needs. Simply stated, you need to be able to move, add, or<br />
change cables and have re-enterable firestop products and systems that allow you<br />
to do it quickly and economically. Our High-Traffic firestop products can handle all<br />
of your cable penetration requirements.<br />
Choosing the Right Product <strong>for</strong> Your High-Traffic Application<br />
The chart below outlines the product application choices.<br />
cable change<br />
frequency<br />
penetration opening<br />
Small large<br />
More changes EZ-Path ® EZ-Path ®<br />
less changes Putty<br />
Ready Sleeve<br />
Pillows<br />
<strong>Firestop</strong> <strong>Products</strong> <strong>for</strong> Permanent Installations<br />
Sealant systems installed in and around cables are generally considered a permanent<br />
installation and are appropriate <strong>for</strong> external seals including conduits and<br />
sleeves, and where cables will not be changing. Combustible penetrants in all<br />
construction need the protection that only a high quality intumescent firestop<br />
sealant can provide. For cable penetrations where re-entry is neither required nor<br />
desirable, SpecSeal® intumescent sealants provide maximum firestopping protection.<br />
Where non-combustible penetrants exist, our Series LC150 is a high quality,<br />
non-halogenated firestopping sealant designed <strong>for</strong> through-penetrations.<br />
Triple S ® Intumescent Sealant LCI Intumescent Sealant LC150 Endothermic Sealant<br />
1.800.992.1180
producT SelecTor<br />
FIRESTOP SEALAnTS<br />
COMPOSITE SHEET<br />
FIRESTOP MORTAR<br />
FIRESTOP PUTTy<br />
FIRESTOP PILLOWS<br />
www.stifirestop.com<br />
Triple S ® intumescent Sealant — pg. 4<br />
Premium grade, water-based firestop caulk<br />
featuring STI’s patented two-stage intumescent<br />
technology. The perfect choice <strong>for</strong> the broadest<br />
array of combustible and non-combustible electrical<br />
penetrants requiring a permanent, durable<br />
seal.<br />
lci intumescent Sealant — pg. 4<br />
Standard grade, water-based firestop caulk<br />
engineered to address most common combustible<br />
and noncombustible electrical applications<br />
typically found in light commercial construction.<br />
lc endothermic Sealant — pg. 5<br />
An economical, non-intumescent, non-halogenated<br />
caulk <strong>for</strong> non-combustible penetrants.<br />
penSil ® 300 Silicone products — pg. 5<br />
A 100% silicone firestop caulk engineered to<br />
rapidly cure and resist washout (W Ratings) when<br />
used in exposed applications.<br />
intumescent composite Sheet — pg. 6<br />
Lightweight, easily fabricated panel surface<br />
mounts to walls and floors to provide a neat,<br />
clean seal <strong>for</strong> medium to large openings typically<br />
used <strong>for</strong> cable trays, bus ducts, and conduit<br />
banks.<br />
SSM firestop Mortar — pg. 6<br />
A strong, lightweight, cementitious mortar<br />
designed <strong>for</strong> large openings typically used <strong>for</strong><br />
cable trays or banks of conduits.<br />
SSp intumescent putty — pg. 7<br />
non-hardening intumescent putty is easily<br />
installed and removed making it the perfect<br />
choice <strong>for</strong> cable penetrations requiring occasional<br />
retrofitting.<br />
SSB intumescent firestop pillows — pg. 7<br />
Compressible cushions are easily installed and<br />
removed. The perfect firestop solution <strong>for</strong> medium<br />
to large openings including cables bundles,<br />
cable trays, bus ducts and multiple conduits.<br />
PATHWAyS<br />
FIRESTOP SLEEvES<br />
PUTTy PAdS<br />
ELECTRICAL bOx InSERTS<br />
FIRE PROTECTIvE CAbLE COATIng<br />
ACCESSORIES<br />
eZ-path ® fire rated pathway — pg. 8-11<br />
A mechanical cable pathway system utilizing a<br />
self-contained, self-sealing firestop system. Easy<br />
moves, adds, and changes with no firestopping<br />
required ever. Three sizes and a full range of<br />
accessories adapt this system to virtually any<br />
application.<br />
ready Sleeve — pg. 12<br />
Complete firestop sleeve assembly <strong>for</strong> new cable<br />
installations. Includes all mounting hardware and<br />
internal and external firestop sealing materials.<br />
Available in 1”, 2”, and 4” sizes with standard or<br />
large escutcheon plates.<br />
ready Split Sleeve — pg. 12<br />
Complete firestop split sleeve assembly <strong>for</strong><br />
new or existing cable installations. Includes all<br />
mounting hardware and internal and external<br />
firestop sealing materials. Available in 1”, 2”,<br />
and 4”sizes.<br />
SSp putty pads — pg. 13<br />
When used with both metallic and non-metallic<br />
switch and receptacle boxes, pads are UL<br />
Tested and Classified to permit larger boxes and<br />
reduced spacing.<br />
powershield electrical Box inserts — pg. 13<br />
When used within metallic switch and receptacle<br />
boxes, inserts are UL tested and Classified to<br />
permit larger boxes and reduced spacing.<br />
cS cable Spray — pg. 14<br />
Water-based, spray applied coating used to<br />
provide short term circuit integrity and improved<br />
flame spread characteristics <strong>for</strong> grouped electrical<br />
cables.<br />
firestop Accessories — pg. 14<br />
STI has several accessories available <strong>for</strong><br />
installing firestop. Caulk tubes, mineral wool<br />
boards and even warning labels <strong>for</strong> labeling<br />
your barriers.<br />
3
fIrESTop SEaLanTS<br />
ordering in<strong>for</strong>MATion<br />
Triple S ® inTuMeScenT SeAlAnT<br />
Premium grade, water-based firestop caulk featuring STI’s<br />
patented two-stage intumescent technology. The perfect<br />
choice <strong>for</strong> the broadest array of combustible and noncombustible<br />
electrical penetrants requiring a permanent,<br />
durable seal.<br />
feATureS & BenefiTS:<br />
• Suitable <strong>for</strong> all <strong>for</strong>ms of construction including industrial and<br />
complex commercial and institutional facilities.<br />
• Patented two-stage intumescent technology.<br />
• Shear thins when caulked to easily seal between cables and<br />
conduits.<br />
• Broadest range of tested and compliant firestop systems.<br />
• UL Tested and Classified <strong>for</strong> all common constructions up to<br />
and including 4 hours. FM Approved.<br />
• Acoustically tested and proven to reduce sound transmission.<br />
• UL leakage tested (L Ratings).<br />
• Water-based - easy cleanup, installation and disposal.<br />
• Safe to use, low VOCs, no solvents, non-halogenated.<br />
• Red color <strong>for</strong> easy identification and inspection.<br />
UPC # Part # description Qty. Case Qty. Weight<br />
Each - lbs.<br />
01100 SSS100 Intumescent Sealant 10.1 oz. Tube (18.2 Cu. In., 300 ml) 1 12 0.90<br />
01102 SSS102 Intumescent Sealant 2 gal. Pail (462 Cu. In., 7.6 L) 1 n/a 20.00<br />
01105 SSS105 Intumescent Sealant 5 gal. Pail (1155 Cu. In.,19.0 L) 1 n/a 50.00<br />
01103 SSS120 Intumescent Sealant 20 oz. Sausage (36 Cu. In., 592 ml) 1 12 1.55<br />
01129 SSS129 Intumescent Sealant 29 oz. Tube (52 Cu. In., 858 ml) 1 10 2.49<br />
ordering in<strong>for</strong>MATion<br />
lci inTuMeScenT SeAlAnT<br />
Standard grade, water-based firestop caulk engineered to address<br />
most common combustible and non-combustible electrical applications<br />
typically found in light commercial construction.<br />
feATureS & BenefiTS:<br />
• Suitable <strong>for</strong> common <strong>for</strong>ms of construction including light commercial<br />
and grouped residential.<br />
• Wide range of tested and compliant firestop systems.<br />
• UL Tested and Classified <strong>for</strong> all common constructions up to and<br />
including 3 hrs.<br />
• Acoustically tested and proven to reduce sound transmission.<br />
• UL leakage tested (L Ratings).<br />
• Water-based - easy cleanup, installation and disposal.<br />
• Safe to use, low VOCs, no solvents, non-halogenated.<br />
• Pale red color <strong>for</strong> easy identification and inspection.<br />
UPC # Part # description Qty. Case Qty. Weight<br />
Each - lbs.<br />
01170 LCI300 Intumescent Sealant 10.1 oz. Tube (18.2 Cu. In., 300 ml) 1 12 0.94<br />
01175 LCI305 Intumescent Sealant 5 gal Pail (1,155 Cu. In.,19.0 L) 1 n/a 50.00<br />
01172 LCI320 Intumescent Sealant 20 oz. Sausage (36 Cu. In., 592 ml) 1 12 1.59<br />
01179 LCI329 Intumescent Sealant 29 oz. Tube (52 Cu. In., 858 ml) 1 10 2.27<br />
ApplicATionS<br />
• Single or multiple metallic conduits &<br />
tubing.<br />
• Single or multiple non-metallic<br />
conduits & tubing.<br />
• Electrical cables including all common<br />
types & sizes.*<br />
• Cable trays & bus ducts.<br />
*Recommended <strong>for</strong> cables that can be<br />
permanently sealed.<br />
ApplicATionS<br />
• Single or multiple metallic conduits &<br />
tubing.<br />
• Single or multiple non-metallic<br />
conduits & tubing.<br />
• Electrical cables including all common<br />
types & sizes.*<br />
*Recommended <strong>for</strong> cables that can be<br />
permanently sealed.<br />
4 1.800.992.1180
ordering in<strong>for</strong>MATion<br />
lc endoTherMic SeAlAnT<br />
An economical, non-intumescent, non-halogenated<br />
caulk <strong>for</strong> non-combustible penetrants. Provides an<br />
economical solution where the application is primarily<br />
metallic conduits.<br />
UPC # Part # description Qty. Case Qty.<br />
Weight<br />
Each - lbs.<br />
01130 LC150 Endothermic Sealant 10.1 oz Tube 18.2 Cu. In. (300 ml) 1 12 0.94<br />
01135 LC155 Endothermic Sealant 5 gal. Pail 1,155 Cu. In. (19.0 L) 1 n/a 58.00<br />
01133 LC120 Endothermic Sealant 20 oz. Sausage 36 Cu. In. (592 ml) 1 12 1.92<br />
01131 LC129 Endothermic Sealant 29 oz. Tube 52 Cu. In. (858 ml) 1 10 2.60<br />
ordering in<strong>for</strong>MATion<br />
feATureS & BenefiTS:<br />
• Easy and economical to use.<br />
• UL Tested and Classified.<br />
• Water-based - easy cleanup, installation and disposal!<br />
• Safe to use, low VOCs, no solvents, non halogenated.<br />
• Red color <strong>for</strong> easy identification and inspection.<br />
penSil ® 300 Silicone SeAlAnT<br />
A 100% silicone firestop caulk engineered to rapidly<br />
cure and resist washout when used in exposed conditions.<br />
feATureS & BenefiTS:<br />
• Low modulus - excellent adhesion.<br />
• Reacts with atmospheric moisture to <strong>for</strong>m a tough, durable seal.<br />
• Cures quickly to resist washout.<br />
• UL Tested <strong>for</strong> W Ratings.<br />
• UL Tested & Classified with ratings up to and including 3 hours.<br />
UPC # Part # description Qty. Case Qty.<br />
Weight<br />
Each - lbs.<br />
01120 PEn300 Silicone 10.3 oz. Tube (18.5 Cu. In., 304 ml) 1 24 1.10<br />
01125 PEn305 Silicone 5 gal. Pail (1,155 Cu. In., 19.0 L) 1 n/a 56.00<br />
01126 PEn305SL Self-Leveling Silicone 5 gal. Pail (1,155 Cu. In., 19.0 L) 1 n/a 56.00<br />
fIrESTop SEaLanTS<br />
ApplicATionS<br />
• Concrete or masonry floors or walls.<br />
• Multiple metallic conduits & tubing.<br />
• Electrical cables including all common<br />
types & sizes.*<br />
*Recommended <strong>for</strong> cables that can be<br />
permanently sealed.<br />
ApplicATionS<br />
• Bus ducts.<br />
• Single or multiple metallic conduits &<br />
tubing.<br />
• Single or multiple electrical cables.*<br />
*Recommended <strong>for</strong> cables that can be<br />
permanently sealed.<br />
1.800.992.1180 5
fIrESTop CompoSITE ShEET<br />
6<br />
ordering in<strong>for</strong>MATion<br />
fIrESTop morTar<br />
ordering in<strong>for</strong>MATion<br />
coMpoSiTe SheeT<br />
Lightweight, easily fabricated panels surface mount to walls<br />
and floors to provide a neat, clean firestop seal <strong>for</strong> medium<br />
to large openings typically used <strong>for</strong> cable trays, bus ducts,<br />
and conduit banks.<br />
feATureS & BenefiTS:<br />
• Easier to use. Half the weight and thickness of traditional panel<br />
products.<br />
• Easier to cut and fabricate using common sheet metal tools.<br />
• Expands up to 15X original thickness when burned.<br />
• Superior air leakage ratings!<br />
• Broad base of tested systems.<br />
• UL Classified (up to 4 hr.)<br />
• FM Approved.<br />
UPC # Part # description Qty. Case Qty. Weight<br />
Each - lbs.<br />
11628 CS1628 16 x 28 in. (41 x 71 cm) Composite Sheet 1 2 4.40<br />
12436 CS2436 24 x 36 in. (61 x 92 cm) Composite Sheet 1 2 8.40<br />
13636 CS3636 36 x 36 in. (92 x 92 cm) Composite Sheet 1 2 12.60<br />
13641 CS3641 36 x 41 in. (92 x 104 cm) Composite Sheet 1 2 14.40<br />
15228 CS2852 28 x 52 in. (71 x 132 cm) Composite Sheet 1 2 14.20<br />
SSM fireSTop MorTAr<br />
Strong, lightweight, cementitious mortar mixes with water to<br />
seal medium to large openings typically used <strong>for</strong> cable trays<br />
or banks of conduits.<br />
feATureS & BenefiTS:<br />
• Light weight/low density - less <strong>for</strong>ming required. Easier retrofit!<br />
• Economical - highest yield per pound means lower installed cost.<br />
• Combines with pillows <strong>for</strong> an economical High-Traffic firestop<br />
solution.<br />
• Wide range of applications - includes aluminum cable tray.<br />
• Red color <strong>for</strong> easy identification and inspection.<br />
• Chemical adhesion reduces the need <strong>for</strong> expensive and<br />
time-consuming concrete fasteners.<br />
• Versatile per<strong>for</strong>mer <strong>for</strong> a wide range of complex applications.<br />
• UL Classified (up to 3 hr.).<br />
• FM Approved.<br />
UPC # Part # description Qty. Case Qty. Weight<br />
Each - lbs.<br />
04106 SSM106 Mortar 6 gal. Pail (22 Lbs., 10 Kilos) 1 n/a 24.00<br />
04200 SSM22b Mortar bag (22 Lbs., 10 Kilos) 1 n/a 23.00<br />
ApplicATionS<br />
• Medium to large openings through<br />
common constructions.<br />
• Single or multiple cable trays <strong>for</strong><br />
power, voice, data.<br />
• Bus ducts.<br />
• Multiple metallic conduits & tubing.<br />
Multiple mixed penetrants of many<br />
types.<br />
• Blank Openings (penetrants removed).<br />
• Suitable <strong>for</strong> clean room/area<br />
environment.<br />
• Combine with the EZ-PATH® System<br />
<strong>for</strong> cable penetrations through large<br />
openings.<br />
appLICaTIonS<br />
• Concrete or masonry floors or walls.<br />
• Multiple metallic conduits & tubing.<br />
• Cable trays (alone or combined with<br />
firestop pillows).<br />
• Electrical cables including all common<br />
types & sizes.<br />
*Recommended <strong>for</strong> cables that can be<br />
permanently sealed.<br />
www.stifirestop.com
fIrESTop puTTy<br />
ordering in<strong>for</strong>MATion<br />
fIrESTop pILLowS<br />
ordering in<strong>for</strong>MATion<br />
SSp inTuMeScenT fireSTop puTTy<br />
Non-hardening, intumescent putty is easily installed<br />
and removed making it the perfect choice <strong>for</strong> cable<br />
penetrations requiring occasional retrofitting.<br />
feATureS & BenefiTS:<br />
• Non-hardening <strong>for</strong> easy installation and retrofitting of cables.<br />
• Two-stage intumescence provides aggressive expansion.<br />
• Highly adhesive: stays put!<br />
• Unaffected by humidity, condensation, water.<br />
• Soft, pliable, easy to install.<br />
• Tested and proven acoustical properties.<br />
• No tools required.<br />
• UL Classified (up to 3 hr.)<br />
• FM Approved.<br />
UPC # Part # description Qty. Case Qty. Weight<br />
Each - lbs.<br />
02100 SSP100 Putty 36 Cu. In. Tube (.6 L) 1 6 2.30<br />
02200 SSP28 Putty 24 Cu. In. Tube (.39 L) 1 1 1.85<br />
SSB inTuMeScenT fireSTop pillowS<br />
Compressible cushions can be easily installed and removed. The<br />
perfect firestop solution <strong>for</strong> medium to large openings including<br />
cable bundles, cable trays, bus ducts and multiple conduits.<br />
feATureS & BenefiTS:<br />
• Intumescent - expands in all directions <strong>for</strong> a tough, tight seal.<br />
• Re-installable <strong>for</strong> easy retrofitting of cables.<br />
• Single side application makes installation easy <strong>for</strong> tough access<br />
openings.<br />
• Heat-sealed poly cover protects core and makes pillows slide in and out<br />
with ease.<br />
• Superior air leakage ratings!<br />
• Broad base of tested systems.<br />
• UL Classified (up to 4 hr.).<br />
• FM Approved.<br />
UPC # Part # description Qty. Case Qty. Weight<br />
Each - lbs.<br />
06140 SSb14 <strong>Firestop</strong> Pillow 1”x 4”x 9” (2.5 x 10 x 23 cm) 1 20 0.18<br />
06240 SSb24 <strong>Firestop</strong> Pillow 2”x 4”x 9” (5.0 x 10 x 23 cm) 1 10 0.27<br />
06260 SSb26 <strong>Firestop</strong> Pillow 2”x 6”x 9” (5.0 x 15 x 23 cm) 1 22 0.35<br />
06360 SSb36 <strong>Firestop</strong> Pillow 3”x 6”x 9” (7.6 x 15 x 23 cm) 1 16 0.48<br />
ApplicATionS<br />
• Small to medium openings through<br />
common constructions.<br />
• Single or multiple cables <strong>for</strong> power,<br />
voice, data.<br />
• Single or multiple cable trays <strong>for</strong><br />
power, voice, data.<br />
• Sleeved openings <strong>for</strong> cable bundles<br />
• Conduits.<br />
ApplicATionS<br />
• Medium to large openings through<br />
common constructions.<br />
• Loose cable <strong>for</strong> power, voice, data.<br />
• Single or multiple cable trays <strong>for</strong><br />
power, voice, data.<br />
• Bus ducts.<br />
• Multiple metallic conduits & tubing.<br />
• Multiple, mixed penetrants of all<br />
types.<br />
1.800.992.1180 7
paThwayS<br />
®<br />
conTinuouSly STopping fire - wiThouT conTinuouSly fireSTopping<br />
SpecificATionS<br />
• Maximum resistance to fire and smoke whether empty or 100% visually<br />
filled.<br />
• Assures fire and smoke protection with every new or retrofit cable<br />
installation.<br />
• Superior fire and smoke leakage vs. standard sleeve and putty systems.<br />
• Unlike conventional sleeve and putty system, EZ-Path ® remains fire and<br />
smoke compliant 100% of the time!<br />
• U.S. Patent 6,732,481.<br />
• Built-in firestopping system automatically adjusts to the number of<br />
cables installed-assures it is firestopped — even at maximum cable<br />
loading.<br />
• Intumescent material rapidly responds to flames or heat by quickly<br />
sealing the pathways and preventing the passage of flames and smoke.<br />
• Excellent F, T & L Ratings.<br />
• Published total leakage area values - no additional putty or pieces to<br />
maintain ratings.<br />
• UL ® Classified and FM Approved in accordance with ASTM E814 (UL 1479).<br />
• UL systems are available <strong>for</strong> up to 4 hour rated floor and wall constructions.<br />
FIRESTOP dEvICE FOR USE In THROUgH-PEnETRATIOn FIRESTOP<br />
SySTEMS. SEE UL dIRECTORy OF PROdUCTS CERTIFIEd FOR<br />
CAnAdA And UL FIRE RESISTAnCE dIRECTORy.<br />
MAxiMuM fire And SMoKe proTecTion<br />
All data, video, and communications cable bundles shall utilize an enclosed fire<br />
rated pathway device wherever said cables penetrate rated walls. The fire-rated<br />
pathway shall contain a built-in fire sealing system sufficient to maintain the hourly<br />
fire rating of the barrier being penetrated. The self-contained sealing system<br />
shall automatically adjust to the installed cable loading and shall permit cables to<br />
be installed, removed, or retrofitted without the need to adjust, remove or reinstall<br />
firestop materials. The pathway shall be UL ® Classified and/or FM Systems<br />
Approved and tested to the requirements of ASTM E814 (UL1479).<br />
Specified Divisions<br />
dIv. 7 07 84 00 Penetration <strong>Firestop</strong>ping<br />
dIv. 26 26 00 00 Electrical<br />
dIv. 27 27 00 00 Communications<br />
8 1.800.992.1180
SOFTEN<br />
ChooSE ThE rIghT Ez-paTh ® ConfIguraTIon <strong>for</strong> your CabLIng nEEdS!<br />
www.stifirestop.com<br />
pAyS <strong>for</strong> iTSelf in A few chAngeS... A Zero MAinTenAnce SoluTion<br />
1 Height x Width<br />
Inches (mm)<br />
Length<br />
Inches (mm)<br />
paThwayS<br />
Series 22 Series 33 Series 44<br />
1.5” x 1.5”<br />
(38 mm x 38 mm)<br />
3.0” x 3.0”<br />
(76 mm x 76 mm)<br />
4” x 4-5/8”<br />
(102 mm x 118 mm)<br />
10.5” (267 mm) 10.5” (267 mm) 14” (356 mm)<br />
volume Expansion 40x 16x 16x<br />
Can be ganged -- Up to 7<br />
Up to 5 in walls<br />
Up to 16 in floors<br />
Can be Lengthened -- 6” (152 mm) increments --<br />
Insert into Cored Hole 2” (51 mm) 4” (102 mm) 6” (153 mm)<br />
Attached to Conduit -- 4” (102 mm) --<br />
Fire Rated in Walls Up to 4 hours Up to 4 hours Up to 4 hours<br />
Fire Rated in Floors -- Up to 4 hours Up to 4 hours<br />
Approx. Max Cable Capacity 25 + 120 + 244 +<br />
Approx. Max Cable Capacity<br />
(ganged)<br />
Approx. Max Cable Capacity<br />
(grid)<br />
When compared to<br />
traditional sleeves<br />
sealed with sealant<br />
or putty, EZ-Path ® will<br />
have paid <strong>for</strong> itself<br />
in just three cable<br />
changes or less. The<br />
savings will increase<br />
with each additional<br />
cable change.<br />
• All-in-one design installs in minutes.<br />
• Conveniently packaged kits <strong>for</strong> easy installation — no additional<br />
parts to order.<br />
• Splits apart <strong>for</strong> old work.<br />
• Wide range of accessories.<br />
• Group pathways <strong>for</strong> additional capacity.<br />
• Organizes and manages cables.<br />
• Clean, professional, engineered appearance.<br />
• Easy moves, adds and changes.<br />
• Can be installed as the wall is being built.<br />
-- 840 + 1,220 +<br />
-- -- 3,904 + in floors<br />
Cable capacity estimates are based upon using CAT5. Cable diameters vary widely by manufacturer. Consult STI’s cable estimator online <strong>for</strong> accurate estimates.<br />
www.stifirestop.com/EZ-Path<br />
®<br />
9
paThwayS<br />
®<br />
fireSTopping iS no longer The proBleM... iT’S The SoluTion!<br />
All pathway kits are conveniently packaged with 22, 33, and 44 Series EZ-PATH ® Fire Rated Pathways, plates, gaskets and labels <strong>for</strong> installation!<br />
• An EZ-Path ® Solution <strong>for</strong> high volume cable penetrations through<br />
floors.<br />
• A bolt-in solution <strong>for</strong> riser applications that brings the safety and<br />
simplicity of EZ-Path ® to your vertical cable installations.<br />
• The EZ-Path ® Modular Floor grid System can handle literally thousands<br />
of cables.<br />
• Modular Floor Grid Systems utilize the high volume, EZ-Path ® 44<br />
Series Pathways installed in banks of four to provide your cabling<br />
systems with room to grow.<br />
• Organize cables by type, use or trade.<br />
• Install in walls or floors to provide managed portals to route cables.<br />
• Install one or gang them up <strong>for</strong> additional capacity and better cable<br />
organization!<br />
For our easy-to-use installation guide on the complete EZ-PATH ® Fire Rated Pathway product line,<br />
contact STI customer service or download a copy at www.stifirestop.com/literature.<br />
ModulAr floor grid SySTeM<br />
Sturdy steel grids mount one, two or four banks or pathways in built-in slots <strong>for</strong> a total of up to sixteen pathways through a single<br />
floor opening. A single bank Floor grid comes complete with pathways. Multi-bank Modular Floor grids are installed with firestop<br />
panels sealing each slot. As additional cable capacity is required, firestop panels are removed and pathway modules containing<br />
four pathways are installed in each slot.<br />
10 1.800.992.1180
upc<br />
730573-<br />
www.stifirestop.com<br />
cATAlog<br />
nuMBer deScripTion<br />
Series 22 eZ-path ® fire-rated pathway Kits*<br />
paThwayS<br />
Min. QTy/<br />
cASe QTy.<br />
00022 EZd22 Series 22 - Fire-Rated Pathway Kit 6<br />
Series 33 eZ-path ® fire-rated pathway, Kits, Accessories and plate packs*<br />
00004 EZd33FWS Series 33 - Fire-Rated Pathway device 6<br />
00034 EZdP33FWS Series 33 - Square Kit - device with square wall plate pack 4<br />
00035 EZdP133CWK Series 33 - Circular Kit - device with circular wall plate pack 1<br />
00005 EZd33E Series 33 - Extension Module 1<br />
00533 EZdP33WR Series 33 - Retro-Fit Kit - device with retro-fit wall plate pack 1<br />
00835 EZdP133FK Series 33 - Kick in Kit - device with kick-in plate pack 1<br />
00235 EZdP233gK Series 33 - Two-gang Kit - Two (2) devices with two-gang plate pack 1<br />
00335 EZdP333gK Series 33 - Three-gang Kit - Three (3) devices with three-gang plate pack 1<br />
00435 EZdP433gK Series 33 - Four-gang Kit - Four (4) devices with four-gang plate pack 1<br />
00436<br />
Series 33 - Color Coded Four-gang Kit<br />
EZdP433gK-C<br />
Four (4) devices (1-orange, 1-blue, 1-yellow, 1-white) with four-gang plate pack<br />
1<br />
00735 EZdP733gK Series 33 - Seven-gang Kit - Seven (7) devices with seven-gang plate pack 1<br />
00036 EZdP133CAK Series 33 - Conduit Attachment Kit-device with conduit attachment plate pack 1<br />
00137 EZP133CW Series 33 - Circular Wall Plate Pack 1<br />
00133 EZP133W Series 33 - Single Square Wall Plate Pack 1<br />
00233 EZP233W Series 33 - double Wall Plate Pack 1<br />
00333 EZP333W Series 33 - Triple Wall Plate Pack 1<br />
00433 EZP433W Series 33 - Four-gang Plate Pack 1<br />
00733 EZP733W Series 33 - Seven-gang Plate Pack 1<br />
00135 EZP133PC Series 33 - One Pair (2) Positioning Clamps 1<br />
00833 EZP133K Series 33 - Single Kick-In Plate Pack - (For use with floor applications) 6<br />
00535 EZP133R Series 33 - Retro-Fit Mounting Plate Pack 1<br />
00138 EZP133CA Series 33 - Conduit Attachment Plate Pack 1<br />
00933 RCM33 Series 33 - One Pair (2) Radius Control Modules 1<br />
Series 44 eZ-path ® fire-rated pathway, Kits, grid Assemblies, and plate packs*<br />
00007 EZd44 Series 44 - Fire-Rated Pathway device 4<br />
00044 EZdP44 Series 44 - Fire-Rated Pathway Kit - device with single wall plate pack 1<br />
00045 EZdP144FK Series 44 - Floor Kit - device with floor plate pack 1<br />
00444 EZdg444 Series 44 - Single bank Floor grid - Four (4) devices with floor frame 1<br />
00048 EZd444Mb Series 44 - Single bank of devices - Four (4) devices with hanger bracket 1<br />
00845 EZdg844<br />
Series 44 - Multi-slot Frame Kit <strong>for</strong> 8 Pathways -<br />
(Includes eight (8) Series 44 devices with EZg844)<br />
1<br />
00645 EZdg1644<br />
ordering in<strong>for</strong>MATion<br />
Series 44 - Multi-slot Frame Kit <strong>for</strong> 16 Pathways -<br />
(Includes sixteen (16) Series 44 devices with EZg1644)<br />
00144 EZP144W Series 44 - Single Wall Plate Pack 1<br />
00544 EZP544W Series 44 - Multi-gang Wall Plate Pack 1<br />
00834 EZP144F Series 44 - Split Floor Plate Pack 1<br />
00844 EZg844 Series 44 - Multi-Slot Frame <strong>for</strong> Eight (8) Pathways 1<br />
00644 EZg1644 Series 44 - Multi-Slot Frame <strong>for</strong> Sixteen (16) Pathways 1<br />
*All Kits include appropriate quantity of pathways, wall plates, gaskets, labels, required set screws and an allen key. **All plate packs include wall plates, gaskets, labels, required set screws and an allen key.<br />
1<br />
11
fIrESTop SLEEvES<br />
ordering in<strong>for</strong>MATion<br />
reAdy Sleeve<br />
A complete code compliant firestop sleeve assembly <strong>for</strong><br />
new cable installations. Includes all mounting hardware and<br />
internal and external firestop sealing materials. Available in<br />
1”, 2”, and 4” sizes with standard or large escutcheon plates.<br />
feATureS & BenefiTS:<br />
• Complete! Includes sleeve, all mounting hardware, firestopping<br />
materials.<br />
• Saves money by reducing expensive shop and field labor.<br />
• Standard and large escutcheons available.<br />
• Meets code requirements <strong>for</strong> internal/external firestop sealing.<br />
• Meets code requirements <strong>for</strong> wall attachment.<br />
• Built-in busings protect cables.*<br />
• Includes SpecSeal® Series SSP Intumescent <strong>Firestop</strong> Putty sufficient<br />
<strong>for</strong> 1” (25 mm) depth at both ends.<br />
• UL Classified (up to 4 hr.)<br />
* Standard <strong>for</strong> 2”(60 mm OD) and 4”(114 mm OD) sizes. Separate bushing<br />
provided <strong>for</strong> 1” (25 mm).<br />
UPC # Part # description Qty. Case Qty. Weight<br />
Each - lbs.<br />
20100 FS100 1 in. (25 mm) <strong>Firestop</strong> Sleeve 1 6 1.00<br />
20200 FS200 2 in. (51 mm) <strong>Firestop</strong> Sleeve 1 6 2.00<br />
20400 FS400 4 in. (102 mm) <strong>Firestop</strong> Sleeve 1 6 4.00<br />
20201 FS201 2 in. (51 mm) <strong>Firestop</strong> Sleeve w/ large escutcheon plates 1 n/a 2.90<br />
20401 FS401 4 in. (102 mm) <strong>Firestop</strong> Sleeve w/ large escutcheon plates 1 n/a 4.80<br />
ordering in<strong>for</strong>MATion<br />
reAdy SpliT Sleeve<br />
ReadySleeve convenience <strong>for</strong> existing cable installations.<br />
Split sleeve and two-piece wall plates allow sleeve to be<br />
assembled around cables and locked into the wall or floor.<br />
Available in 1”, 2”, and 4” sizes.<br />
feATureS & BenefiTS:<br />
• Complete! Includes split sleeve, all mounting hardware,<br />
firestopping materials.<br />
• Over-sized plates <strong>for</strong> larger or irregular openings.<br />
• Built-in bushings protect cables.<br />
• Meets code requirements <strong>for</strong> internal/external firestop sealing.<br />
• Optional wall attachment points provided <strong>for</strong> sleeve stabilization.<br />
• Includes SpecSeal® <strong>Firestop</strong> Putty as well as split external firestop<br />
gasket.<br />
• UL Classified (up to 4 hr ).<br />
UPC # Part # description Qty. Case Qty. Weight<br />
Each - lbs.<br />
21000 FSR100 1 in. (25 mm) Split <strong>Firestop</strong> Sleeve 1 4 1.25<br />
22000 FSR200 2 in. (51 mm) Split <strong>Firestop</strong> Sleeve 1 4 2.50<br />
24000 FSR400 4 in. (102 mm) Split <strong>Firestop</strong> Sleeve 1 4 6.25<br />
ApplicATionS<br />
• Protect, support and seal cables<br />
routed through rated and non-rated<br />
walls & floors.<br />
• All common constructions up to 10”<br />
(250 mm) thick.<br />
• Available trade sizes 1” (33 mm OD),<br />
2” (60 mm Od), 4” (114 mm Od).<br />
• Standard small escutcheons <strong>for</strong><br />
accurate gypsum board openings.<br />
• Large escutcheons <strong>for</strong> concrete or<br />
masonry openings.<br />
ApplicATionS<br />
• New or existing cable installations<br />
through walls or floors.<br />
• All common constructions up to 10”<br />
(250 mm) thick.<br />
• Available trade sizes 1” (33 mm OD),<br />
2” (60 mm Od), 4” (114 mm Od).<br />
• Oversized or irregular openings.<br />
12 1.800.992.1180
ordering in<strong>for</strong>MATion<br />
ordering in<strong>for</strong>MATion<br />
SSp inTuMeScenT puTTy pAdS<br />
Externally applied to switch and receptacle boxes, pads are<br />
UL Tested and Classified to permit larger boxes and reduced<br />
spacing in gypsum board walls.<br />
feATureS & BenefiTS:<br />
• Fits common 4S box with no cutting or trimming.<br />
• Two-Stage intumescence provides aggressive expansion.<br />
• Highly adhesive: stays put.<br />
• Unaffected by humidity, condensation, water.<br />
• Soft, pliable, easy to install.<br />
• Tested and proven acoustical properties.<br />
• Poly liner allows hands-off, clean installation.<br />
UPC # Part # description Qty. Case Qty. Weight<br />
Each - lbs.<br />
02200 SSP4S Putty Pad 7.25” x 7.25” x 3/16” 1 20 0.59<br />
02300 SSP9S Putty Pad 9.00” x 9.00” x 3/16” 1 20 0.99<br />
powerShield elecTricAl Box inSerTS<br />
When used within metallic switch and receptacle boxes, inserts<br />
are UL Tested and Classified to permit larger boxes and<br />
reduced spacing.<br />
feATureS & BenefiTS:<br />
• Easy installation! Just peel and stick to inside of box.<br />
• Can be installed be<strong>for</strong>e or after wall is closed.<br />
• Non-conductive liner face.<br />
• Easy retrofit installation.<br />
• Low profile <strong>for</strong> minimum impact on box volume.<br />
• Tested and proven acoustical properties.<br />
• One step installation saves time and labor.<br />
UPC # Part # description Qty. Case Qty. Weight<br />
Each - lbs.<br />
02500 EP44 Electrical box Insert 3 3/4” x 3 3/4” x 1/8” pad 1 20 0.09<br />
02505 EP45 Electrical box Insert 4-1/4” x 4-1/4” x 1/8” pad 1 20 0.10<br />
www.stifirestop.com<br />
fIrESTop puTTy padS<br />
ApplicATionS<br />
• Single & multi-gang metallic boxes up<br />
to 14” (356 mm) long.<br />
• A variety of non-metallic boxes.<br />
• Plastic & steel faceplates.<br />
• 1& 2 hr. wood or steel stud walls.<br />
ELECTrICaL box InSErTS<br />
ApplicATionS<br />
• Single & multi-gang metallic boxes up<br />
to 14” (356 mm) long.<br />
• Plastic & steel faceplates.<br />
• 1 & 2 hr. wood or steel stud walls.<br />
13
fIrE proTECTIvE CabLE CoaTIng<br />
ordering in<strong>for</strong>MATion<br />
cABle SprAy<br />
Water-based, spray-applied coating used to provide short term<br />
circuit integrity and improved flame spread characteristics <strong>for</strong><br />
grouped electrical cables.<br />
feATureS & BenefiTS:<br />
UPC # Part # description Qty. Case Qty. Weight<br />
Each - lbs.<br />
07104 CS105 Cable Spray 5 gal. (1,155 Cu.In., 19.0 L) Pail 1 n/a 55.00<br />
fIrESTop aCCESSorIES<br />
• Easy and economical to use.<br />
• FM Approved.<br />
• Water-based - easy cleanup, installation and disposal.<br />
• Low friction <strong>for</strong>mula - Less pump wear.<br />
• Brushable <strong>for</strong> touch ups and spot repairs.<br />
STI has several accessories available <strong>for</strong> installing firestop. Caulk tubes, mineral wool<br />
boards and even warning labels <strong>for</strong> labeling your barriers.<br />
ordering in<strong>for</strong>MATion<br />
UPC # Part # description Qty. Case Qty.<br />
appLICaTIonS<br />
• Encapsulate grouped cables.<br />
• Apply as fire breaks in cable tray runs.<br />
Weight<br />
Each - lbs.<br />
05001 SSAMW Mineral Wool boards (2) 2’x4’x1.5” Per box (5.08 x 10.16 x 3.81 cm) 1 - 12.00<br />
05020 SSACg Caulk gun (11 oz.) 1 4 1.49<br />
05021 SSAQCg 29 oz. Caulk gun 1 - 2.50<br />
05022 SSASCg 20 oz. Caulk gun 1 - 2.90<br />
09554 Z1002-892-Cg <strong>Firestop</strong> Penetration Warning Label (5 3/8” x 4 1/2”) (13.65 x 11.43 cm) 1 1000/roll 0.01<br />
03775 SSWFT Foil Tape 2” x 30’ 1 6 0.44<br />
14 1.800.992.1180
Specify STi <strong>for</strong> your next project using our Submittal Builder!<br />
Advanced Web-Based Technology is Key to Creating Quick and Easy Submittals<br />
Specified Technologies, Inc.‘s web-based Submittal builder<br />
tool (www.stifirestop.com) allows professional firestop submittals<br />
to be generated quickly and easily. The first of its kind in the<br />
industry, this easy-to-use tool allows users to create a customized<br />
submittal from scratch, or to choose one from a list of STI prebuilt<br />
submittals specially designed <strong>for</strong> a variety of applications.<br />
Features:<br />
• Search by barrier and penetrant.<br />
• Find the correct UL systems <strong>for</strong> a specific project.<br />
• Eliminate unsuitable sealing methods or products.<br />
• Offers the best possible solutions arranged by ease of use.<br />
• Quick Search feature locates the UL system by number.<br />
Additional Items automatically included based on your chosen systems:<br />
• general Certificate of Compliance<br />
• Product data sheets<br />
• MSdSs<br />
The final submittal, complete with a customized project cover sheet, is generated as a PdF that can<br />
be printed or sent via e-mail. Once a submittal is created, it is archived in the user’s personal file<br />
<strong>for</strong> future viewing or modification.<br />
www.stifirestop.com<br />
For a submittal builder test drive, log onto the STI website at<br />
www.stifirestop.com.<br />
15
www.stifirestop.com<br />
200 Evans Way<br />
Somerville, NJ 08876<br />
Toll Free: 800-992-1180<br />
Fax: 908-526-9623<br />
email: sales@stifirestop.com<br />
www.stifirestop.com<br />
SpecSeal®, EZ-Path® and Triple S® are registered trademarks of Specified Technologies Inc.<br />
High-Traffic is a trademarks of Specified Technologies Inc.<br />
PEnSIL® is a registered trademark of general Electric Company.<br />
UL® and the UL Mark are a registered trademarks of Underwriter’s Laboratories, Inc.<br />
© 2007 Specified Technologies Inc. All rights reserved.<br />
ZSTI3116 Rev. 3
FIRESTOPPING<br />
<strong>Products</strong> <strong>for</strong> Life Safety and Code Compliance<br />
www.stifirestop.com
Specified TechnologieS inc.<br />
Specified Technologies Inc. (STI) is an<br />
industry leader solely committed to<br />
the development of innovative, reliable<br />
firestopping solutions that help stop the<br />
spread of fire, smoke and toxic fumes.<br />
For over 25 years, our management<br />
team has worked hand in hand with the<br />
construction industry to create innovative<br />
firestop solutions <strong>for</strong> all types of new<br />
construction and retrofit applications.<br />
We offer the broadest range of UL ®<br />
Classified Systems — more than any<br />
other manufacturer. We keep material<br />
requirements to a minimum and we design<br />
systems with the installer in mind. The<br />
result is less labor and significantly lower<br />
installed costs.<br />
Product Selector<br />
RESIdENTIAl cAulk<br />
Wf300 firestop caulk — pg. 5<br />
Intumescent firestop caulk designed <strong>for</strong> sealing through-penetrations<br />
and gaps in fire resistance-rated wood frame construction.<br />
FIRESTOP SPRAYS & jOINT SEAlANT<br />
eS elastomeric Sealant — pg. 6<br />
Non-halogenated latex-based sealant designed to provide passive smoke<br />
and fire protection in construction joint applications.<br />
d<br />
©2009 Specified Technologies, Inc.<br />
Triple S ® FIRESTOP SEAlANTS<br />
intumescent Sealant — pg. 4<br />
Premium grade intumescent firestop sealant featuring STI’s patented<br />
two-stage intumescent technology. Triple S can be used in most<br />
common through-penetrations as well as a variety of membrane<br />
A penetrations and construction joints.<br />
lci intumescent Sealant — pg. 4<br />
Standard grade intumescent firestop sealant engineered to<br />
economically address many common through-penetration applications<br />
in light commercial construction.<br />
lc endothermic Sealant — pg. 5<br />
High quality, non-halogenated firestopping sealant designed <strong>for</strong><br />
non-combustible penetrants in through-penetrations and construction<br />
joints.<br />
penSil ® Silicone products — pg. 7<br />
A 100% silicone firestop caulk engineered to rapidly cure and<br />
resist washout (W Ratings) when used in exposed applications.<br />
Also used in construction joint applications.<br />
SmokeBlock ® e-136 caulk — pg. 5<br />
Meets the requirement of ASTM E136 <strong>for</strong> use in non-rated applications<br />
<strong>for</strong> fireblocking and draftstopping.<br />
AS elastomeric Spray — pg. 6<br />
Water-based, spray applied coating <strong>for</strong> joints and certain through-penetrations<br />
in fire-rated walls or floors.<br />
e<br />
2<br />
1.800.992.1180
FIRESTOP SPRAYS & jOINT SEAlANT<br />
SMOkE & AcOuSTIcAl PROducTS<br />
Smoke ‘n’ Sound Acoustical Sealant — pg. 8<br />
Sealant grade product <strong>for</strong> sealing openings in<br />
non-rated smoke barriers and partitions.<br />
FIRESTOP cOllARS<br />
firestop collars — pg. 10<br />
Ready-to-use firestop devices designed to<br />
collapse plastic pipe penetrations when exposed<br />
to fire conditions.<br />
c<br />
fast Tack firestop Spray — pg. 7<br />
Quick dry, firestop spray <strong>for</strong> use in curtain wall/<br />
edge of slab, and general construction joints that<br />
are subject to movement.<br />
cONSTRucTION jOINT SYSTEM<br />
Speedflex Joint System — pg. 9<br />
A quick, economical alternative to using strips of<br />
mineral wool <strong>for</strong>ming material in the joint area<br />
between the fire-rated wall assembly and the<br />
bottom of a steel deck or concrete floor.<br />
FIRESTOP ANglE<br />
penSil ® Silicone products — pg. 7<br />
A 100% silicone firestop caulk engineered to<br />
rapidly cure and resist washout (W Ratings)<br />
when used in exposed applications. Also used in<br />
through penetration applications.<br />
Smoke ‘n’ Sound Acoustical Spray — pg. 8<br />
Spray grade product <strong>for</strong> sealing openings in nonrated<br />
smoke barriers and partitions.<br />
fyreflange duct Angle — pg. 9<br />
duct support and firestopping in one product.<br />
Range-Taking collars — pg. 10<br />
Factory-manufactured device designed to seal<br />
plastic pipes penetrating fire resistance rated walls<br />
and floors. SpecSeal ® RTc collars are designed to<br />
allow a single collar to fit 3” and 4” trade size<br />
pipes (89 and 114 mm) and corresponding 3” and<br />
4” couplings (102 and 127 mm).<br />
WRAP STRIPS & RESTRAININg cOllARS<br />
SSW Wrap Strips — pg. 11<br />
Intumescent, flexible wrap strips <strong>for</strong> throughpenetrations.<br />
WSc Restraining collars — pg. 11<br />
Pre<strong>for</strong>med metal restraining collars <strong>for</strong> use with<br />
SSW Wrap Strips in plastic pipe applications.<br />
FIRESTOP AccESSORIES<br />
firestop Accessories — pg. 11<br />
STI has several accessories available <strong>for</strong> installing<br />
firestop. Caulk tubes, mineral wool boards and<br />
even warning labels <strong>for</strong> labeling your barriers.<br />
PATHWAYS<br />
cOMPOSITE SHEET<br />
composite Sheet — pg. 16<br />
lightweight, firestop panels effectively seal<br />
medium to large openings with a variety of<br />
penetrants in fire-rated floors and walls.<br />
FIRESTOP MORTAR<br />
SSM firestop Mortar — pg. 16<br />
lightweight, cementitious, compound suitable<br />
<strong>for</strong> openings of all sizes in fire-rated construction.<br />
B<br />
FIRESTOP PIllOWS<br />
SSB intumescent firestop pillows — pg. 17<br />
Intumescent firestop pillows expand in all<br />
directions <strong>for</strong> a tough, tight seal and easy retrofit<br />
<strong>for</strong> hard-to-fill, multiple penetrants, and large<br />
g openings.<br />
FIRESTOP PuTTY<br />
Product Selector<br />
SSp putty — pg. 17<br />
Two-stage intumescent, non-hardening putty <strong>for</strong><br />
cable and pipe penetrations. Ideal in small<br />
to medium sized applications that will require<br />
re-entry.<br />
FIRESTOP SlEEvES<br />
Ready Sleeve — pg. 18<br />
complete firestop sleeve assembly <strong>for</strong> new cable<br />
installations. Includes all mounting hardware and<br />
internal and external firestop sealing materials.<br />
Available in 1”, 2”, and 4” sizes with standard or<br />
large escutcheon plates.<br />
PuTTY PAdS<br />
Ready Split Sleeve — pg. 18<br />
complete firestop split sleeve assembly <strong>for</strong><br />
new or existing cable installations. Includes all<br />
mounting hardware and internal and external<br />
firestop sealing materials. Available in 1”, 2”,<br />
and 4”sizes.<br />
SSp putty pads — pg. 19<br />
When used with both metallic and non-metallic<br />
switch and receptacle boxes, pads are ul<br />
Tested and classified to permit larger boxes and<br />
reduced spacing.<br />
ElEcTRIcAl bOx INSERTS<br />
powershield electrical Box inserts — pg. 19<br />
When used within metallic switch and receptacle<br />
boxes, inserts are ul tested and classified to<br />
permit larger boxes and reduced spacing.<br />
cable Spray — pg. 19<br />
Water-based, spray applied coating used to<br />
provide short term circuit integrity and improved<br />
flame spread characteristics <strong>for</strong> grouped electrical<br />
cables.<br />
www.stifirestop.com<br />
3<br />
f<br />
h<br />
FIRE PROTEcTIvE cAblE cOATINg<br />
eZ-path ® fire Rated pathway — pg. 12-15<br />
A mechanical cable pathway system utilizing a<br />
self-contained, self-sealing firestop system. Easy<br />
moves, adds, and changes with no firestopping<br />
required ever. Three sizes and a full range of<br />
accessories adapt this system to virtually any<br />
application.
IntumeScent SealantS<br />
oRdeRing infoRMATion<br />
TRiple S ® inTuMeScenT SeAlAnT<br />
Premium, multi-viscosity grade sealant <strong>for</strong> commercial and industrial<br />
applications. The original and still the best multi-purpose sealant.<br />
feATuReS & BenefiTS:<br />
• Patented two-stage intumescent technology - extremely fast and<br />
directionalized expansion.<br />
• Water-based - easy installation, cleanup and disposal.<br />
• Excellent smoke seal.<br />
• Low shrinkage.<br />
• Acoustically tested - reduces noise transmission.<br />
• Sandable and paintable (when dry).<br />
• Water-resistant - will not re-emulsify when dry!<br />
• Safe - low VOCs, no solvents, non-halogenated.<br />
• Red color - easy identification and inspection.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
01100 SSS100 Intumescent Sealant 10.1 oz. Tube (18.2 cu. In., 300 ml) 1 12 0.90<br />
01102 SSS102 Intumescent Sealant 2 gal. Pail (462 cu. In., 7.6 l) 1 n/a 20.00<br />
01105 SSS105 Intumescent Sealant 5 gal. Pail (1155 cu. In.,19.0 l) 1 n/a 50.00<br />
01103 SSS120 Intumescent Sealant 20 oz. Sausage (36 cu. In., 592 ml) 1 12 1.55<br />
01129 SSS129 Intumescent Sealant 29 oz. Tube (52 cu. In., 858 ml) 1 10 2.49<br />
oRdeRing infoRMATion<br />
lci inTuMeScenT SeAlAnT<br />
A Great Combination of Price and Per<strong>for</strong>mance in a <strong>Firestop</strong> Sealant<br />
SpecSeal ® Series LCI is a standard grade intumescent sealant specifically<br />
engineered and tested to economically address many common<br />
firestop applications that represent a significant part of the<br />
overall market.<br />
feATuReS & BenefiTS:<br />
• Commercial grade sealant.<br />
• Fast-acting intumescence - expands up to 10X.<br />
• Water-based - easy installation, cleanup, and disposal.<br />
• Excellent smoke seal.<br />
• Water-resistant - will not re-emulsify when dry.<br />
• Acoustically tested - reduces noise transmission.<br />
• Safe - low VOCs, no solvents, non-halogenated.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
01170 lcI300 Intumescent Sealant 10.1 oz. Tube (18.2 cu. In., 300 ml) 1 12 0.94<br />
01175 lcI305 Intumescent Sealant 5 gal Pail (1,155 cu. In.,19.0 l) 1 n/a 50.00<br />
01172 lcI320 Intumescent Sealant 20 oz. Sausage (36 cu. In., 592 ml) 1 12 1.59<br />
01179 lcI329 Intumescent Sealant 29 oz. Tube (52 cu. In., 858 ml) 1 10 2.27<br />
ApplicATionS<br />
• Metallic pipes including steel, iron, or<br />
copper pipe and tubing.<br />
• Nonmetallic pipes, conduits and<br />
tubing including Pvc, cPvc, PvdF,<br />
PEx, PEx-Al-PEx, AbS and Pb.<br />
• Cable, cable trays and bus duct.<br />
• HVAC ductwork.<br />
• Insulated pipes.<br />
• Multi-service penetrations including<br />
Ac line sets, electrical, telephone,<br />
or Tv service entrance and interior<br />
penetrations.<br />
• Complete wood floor firestopping<br />
package <strong>for</strong> electrical, plumbing,<br />
HvAc, Tv and telephone.<br />
ApplicATionS<br />
• Metallic pipes including steel, iron, or<br />
copper pipe and tubing.<br />
• Nonmetallic pipes, conduits and<br />
tubing including Pvc, cPvc, AbS,<br />
and PEx.<br />
• Electrical and electronic cabling<br />
including service entrance, power<br />
distribution, computer, telephone,<br />
and television.<br />
• Metal duct work including HVAC,<br />
bath and dryer vents.<br />
• Insulated pipes including heating,<br />
cooling, and condensation<br />
applications.<br />
• Complete wood floor firestopping<br />
package <strong>for</strong> electrical, plumbing,<br />
HvAc, telephone, and television.<br />
4 1.800.992.1180
oRdeRing infoRMATion<br />
lc endoTheRMic SeAlAnT<br />
LC Sealant is a latex-based, high solids firestop compound. When<br />
properly installed, it effectively seals penetration openings against<br />
the spread of fire, smoke and toxic gases.<br />
feATuReS & BenefiTS:<br />
• Water-based - easy installation, cleanup and disposal.<br />
• Endothermic fillers - absorb heat and release water.<br />
• High solids <strong>for</strong>mula - no shrinkage!<br />
• Paintable (when dry).<br />
• Safe - low VOCs, no solvents, non-halogenated.<br />
• Red color - easy identification and inspection.<br />
• Excellent caulking properties along with high build capabilities.<br />
• Excellent smoke seal.<br />
• Flexible!<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
01130 lc150 Endothermic Sealant 10.1 oz Tube 18.2 cu. In. (300 ml) 1 12 0.94<br />
01135 lc155 Endothermic Sealant 5 gal. Pail 1,155 cu. In. (19.0 l) 1 n/a 58.00<br />
01133 lc120 Endothermic Sealant 20 oz. Sausage 36 cu. In. (592 ml) 1 12 1.92<br />
01131 lc129 Endothermic Sealant 29 oz. Tube 52 cu. In. (858 ml) 1 10 1.92<br />
oRdeRing infoRMATion<br />
oRdeRing infoRMATion<br />
Wf300 inTuMeScenT fiReSTop cAulk<br />
BlazeStop Series WF300 <strong>Firestop</strong> Caulk is designed <strong>for</strong> use in<br />
sealing through-penetrations and gaps in fire resistance-rated<br />
wood frame construction.<br />
feATuReS & BenefiTS:<br />
• Economical - delivers maximum fire protection at the right price.<br />
• Water-based - easy installation, clean-up and disposal.<br />
• Water-resistant - will not re-emulsify.<br />
• Intumescent - expansion fills gaps or voids caused by wood<br />
shrinkage, or burning or melting of combustible materials.<br />
• Meets ASTM E814 (ANSI/UL 1479).<br />
• Acoustically tested – reduces noise transmission.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
09710 WF310 Wood Frame caulk 10.1 oz. Tube (18.2 cu. In., 300 ml) 1 12 0.94<br />
09705 WF305 Wood Frame caulk 5 gal. Pail (1, 155 cu. In., 19.0 l) 1 n/a 58.00<br />
09720 WF320 Wood Frame caulk 20 oz. Sausage (36 cu. In., 592 ml) 1 12 1.92<br />
SMokeBlock ® e-136 cAulk<br />
SmokeBlock ® Caulk is a non-combustible caulking product that<br />
meets the requirements of ASTM E 136 <strong>for</strong> use in non-rated<br />
applications <strong>for</strong> fireblocking and draftstopping.<br />
feATuReS & BenefiTS:<br />
• Up to 1000˚F and more severe one-time exposures.<br />
• Light red color - easy identification and inspection.<br />
• Quality non-sag sealer.<br />
• Water-based - easy installation, clean-up and disposal.<br />
• <strong>Construction</strong> grade quality - no shaking or mixing required.<br />
• Adheres to wood and masonry building materials.<br />
• Con<strong>for</strong>ms to the Model Energy Code - minimizes airflow within the wall.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
01160 Sb100 draft, Smoke and Fireblocking Sealer 10.1 oz. (300ml) 1 12 1.21<br />
fIreStoP caulkS<br />
ApplicATionS<br />
• Piping: non-combustible steel, iron,<br />
cast iron and copper up to 24” in<br />
diameter.<br />
• Complex multiple penetrants<br />
• Communication cabling systems.<br />
• <strong>Construction</strong> joints.<br />
• HVAC ducts.<br />
reSIdentIal caulkS<br />
ApplicATionS<br />
• Through-penetrations and gaps in<br />
wood frame construction.<br />
NONCOMBUSTIBLE<br />
Draft, Smoke & Fireblocking Sealer<br />
ApplicATionS<br />
• Non-rated construction.<br />
• Wood frame walls and floors.<br />
• Building structures that do not exceed<br />
3 stories.<br />
• Wherever E-136 materials are<br />
required.<br />
Get this product on your shelf today!<br />
For more details contact STI @ 1-800-992-1180<br />
www.stifirestop.com 5
fIreStoP SPraY and JoInt Sealant<br />
6<br />
oRdeRing infoRMATion<br />
eS elASToMeRic SeAlAnT<br />
Flexible <strong>Firestop</strong> Protection <strong>for</strong> Fire Rated <strong>Joints</strong>.<br />
feATuReS & BenefiTS:<br />
• Elastomeric - allows movement.<br />
• Water-based - easy installation, clean up and disposal.<br />
• Auto-bonding.<br />
• Compatible with AS Spray <strong>for</strong> applications or repairs.<br />
• Safe - low VOCs, no solvents, non-halogenated.<br />
• Water-resistant - will not re-emulsify when dry.<br />
• Acoustically tested - reduces noise transmission.<br />
uPc # 3Part # description Qty. case Qty.<br />
Weight<br />
Each - lbs.<br />
08100 ES100 Elastomeric Sealant 10.1 oz. Tube (18.2 cu. In., 300 ml) 1 12 1.12<br />
08105 ES105 Elastomeric Sealant 5 gal. Pail (1, 155 cu. In., 19.0 l) 1 n/a 62.00<br />
08103 ES120 Elastomeric Sealant 20 oz. Sausage (36 cu. In., 592 ml) 1 12 1.96<br />
08129 ES129 Elastomeric Sealant 29 oz. Tube (52 cu. In., 858ml) 1 10 3.04<br />
oRdeRing infoRMATion<br />
AS elASToMeRic SpRAy<br />
See compatible<br />
spray grade AS<br />
Spray<br />
The Professional’s Choice <strong>for</strong> Spray-Applied <strong>Firestop</strong> Protection of<br />
<strong>Joints</strong> and Penetrations.<br />
feATuReS & BenefiTS:<br />
• Original quick-dry elastomeric <strong>for</strong>mula.<br />
• Water-based - <strong>for</strong> easy installation, clean-up and disposal.<br />
• Thixotropic - superior high-build properties.<br />
• Safe - low VOCs, no solvents, non-halogenated.<br />
• Auto-bonding - may be re-coated or repaired using ES Caulk.<br />
• Low abrasion - <strong>for</strong> longer pump life and less maintenance.<br />
• Tested with direct-applied fireproofing.<br />
• Acoustically tested - reduces noise transmission.<br />
• Water-resistant - will not re-emulsify when dry.<br />
See compatible<br />
sealant grade<br />
ES Sealant<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
07107 AS205 Elastomeric Spray (construction joints) 5 gal. (1,155 cu. In., 19.0 l) Pail 1 n/a 50.00<br />
ApplicATionS<br />
• Control/expansion joints.<br />
• Slab edge conditions.<br />
• Head of wall - concrete fluted and<br />
slab.<br />
• Bottom of wall-deck to gypsum wall.<br />
• <strong>Joints</strong> and gaps in sound barriers.<br />
ApplicATionS<br />
• Slab edge/Curtain wall conditions.<br />
• Head of wall - concrete fluted deck to<br />
gypsum wall.<br />
• Head of wall - concrete slab to<br />
masonry wall.<br />
• Control/expansion joints (wall & floor).<br />
• Metallic pipes.<br />
• Steel ducts.<br />
1.800.992.1180
oRdeRing infoRMATion<br />
oRdeRing infoRMATion<br />
www.stifirestop.com<br />
fAST TAck fiReSTop SpRAy<br />
fIreStoP SPraY and JoInt Sealant<br />
The Curtain Wall <strong>Firestop</strong> Spray that Won’t Wash Out!<br />
Silicone/urethane hybrid <strong>for</strong>mula provides fire protection <strong>for</strong><br />
construction joints, curtain walls, and applications in concrete<br />
floors. Fast Tack TM <strong>Firestop</strong> Spray is well suited <strong>for</strong> use around<br />
penetrants subject to vibration or movement or in areas that may<br />
be prone to washouts or exposure to water and moisture.<br />
feATuReS & BenefiTS:<br />
• All-weather <strong>for</strong>mula.<br />
• Skins over quickly to resist water.<br />
• Quick-dry/tack-free in 2-4 hours.<br />
• For use in extreme weather conditions, such as cold or rain.<br />
• Cures below freezing.<br />
• Can be top coated, spray coated or flow applied.<br />
• Auto-bonds <strong>for</strong> easy touch ups.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
01192 FT302 Fast-Tack <strong>Firestop</strong> Spray 2 gal. (7.6 l) Pail 1 n/a 20.00<br />
01190 FT305 Fast-Tack <strong>Firestop</strong> Spray 5 gal. (19.0 l) Pail 1 n/a 49.00<br />
penSil ® Silicone SeAlAnT<br />
A 100% silicone firestop caulk engineered to rapidly cure and resist<br />
washout when used in exposed conditions.<br />
feATuReS & BenefiTS:<br />
• Low modulus - allows up to ± 50% movement in joints.<br />
• Auto-bonding - allows fresh sealant to adhere to cured sealant.<br />
• Excellent water-resistance - <strong>for</strong> water-tight sealing.<br />
• Ozone and UV-resistant - <strong>for</strong> excellent weathering ability and long service life.<br />
• Excellent chemical resistance - protects in polluted or corrosive atmospheres.<br />
• Excellent adhesion to most building substrates.<br />
• UL tested <strong>for</strong> W ratings.<br />
• Acoustically tested - reduces noise transmission<br />
uPc # Part # description Qty. case Qty.<br />
Weight<br />
Each - lbs.<br />
01120 PEN300 Silicone 10.3 oz. Tube (18.5 cu. In., 304 ml) 1 24 1.10<br />
01125 PEN305 Silicone 5 gal. Pail (1,155 cu. In., 19.0 l) 1 n/a 56.00<br />
01126 PEN305Sl Self-leveling Silicone 5 gal. Pail (1,155 cu. In., 19.0 l) 1 n/a 56.00<br />
01123 PEN320 Silicone 20 oz. Tube (36 cu. In. (592ml) 1 12 1.94<br />
ApplicATionS<br />
• Slab Edge/Curtain wall conditions.<br />
• Floor to floor joints.<br />
• Floor to wall joints.<br />
ApplicATionS<br />
• Through penetrations with high<br />
temperatures or movement.<br />
• Electrical, data, or telephone cables.<br />
• Slab Edge/Curtain wall, safing and<br />
construction gaps.<br />
• Seismic and expansion joints.<br />
• Curtain wall safing applications.<br />
• Top-of-wall joints.<br />
• Single or multiple metallic pipes,<br />
conduits & tubing.<br />
7
Smoke & acouStIcal ProductS<br />
8<br />
oRdeRing infoRMATion<br />
oRdeRing infoRMATion<br />
SMoke ‘n’ Sound AcouSTicAl SpRAy<br />
feATuReS & BenefiTS:<br />
• Water-based - <strong>for</strong> easy installation and clean-up.<br />
• Excellent smoke seal.<br />
• Acoustically tested - reduces noise transmission.<br />
• High build characteristics.<br />
• Safe. Low VOCs. No solvents! Non-halogenated.<br />
• Economical spray application saves labor!<br />
SMoke ‘n’ Sound AcouSTicAl SeAlAnT<br />
Smoke ‘N’ Sound Acoustical Sealant is a high quality acrylic latex<br />
sealant designed <strong>for</strong> sealing through-penetrations (such as pipes,<br />
conduits, cabling, busways, openings) and membrane penetrations<br />
(such as p-traps and outlet boxes) in smoke rated walls.<br />
feATuReS & BenefiTS:<br />
• Economical - high per<strong>for</strong>mance without the high price!<br />
• Safe <strong>for</strong> contact with plastics.<br />
• Water-resistant - will not re-emulsify when dry.<br />
• Water-based - easy installation, cleanup, and disposal.<br />
• Remains Flexible - allows movement.<br />
• Acoustically Tested - reduces noise transmission.<br />
• Safe. Low VOCs. No solvents! Non-halogenated.<br />
See compatible<br />
sealant grade<br />
Acoustical<br />
Sealant<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
01155 SNS205 Smoke & Acoustical Spray 5 gal. Pail (1,155 cu. In., 19.0 l) 1 n/a 68.00<br />
See compatible<br />
spray grade<br />
Acoustical<br />
Spray<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
01154 SNS105 Smoke ‘N’ Sound Sealant Yellow - 5 gal. Pail 1,155 cu. In. (19.0 l) 1 1 68.00<br />
11154 SNS105W Smoke ‘N’ Sound Sealant White - 5 gal. Pail 1,155 cu. In. (19.0 l) 1 1 70.80<br />
11151 SNS120W Smoke ‘N’ Sound Sealant White - 20 oz. Sausage 36 cu. In. (592 ml) 1 12 2.06<br />
ApplicATionS<br />
• Smoke Control: Where stopping the<br />
passage of smoke is necessary such<br />
as in smoke barrier walls.<br />
• Noise Control: Where reducing the<br />
transmission of sound through wall<br />
openings is necessary to help ensure<br />
occupant privacy and peaceful<br />
environment.<br />
• Infectious/Dust Control: Where<br />
reducing the transmission of dust and<br />
other airborne particulates through<br />
wall openings is necessary.<br />
ApplicATionS<br />
• Smoke Control: Where stopping the<br />
passage of smoke is necessary such<br />
as in smoke barrier walls.<br />
• Noise Control: Where reducing the<br />
transmission of sound through wall<br />
openings is necessary to help ensure<br />
occupant privacy and peaceful<br />
environment.<br />
• Infectious/Dust Control: Where<br />
reducing the transmission of dust and<br />
other airborne particulates through<br />
wall openings is necessary.<br />
1.800.992.1180
Patent 7, 240, 905<br />
oRdeRing infoRMATion<br />
www.stifirestop.com<br />
Speedflex JoinT SySTeM<br />
The Speedflex Joint System combines a unique backer product<br />
with SpecSeal® spray-applied coatings. This system installs over<br />
joints rather than within them to allow maximum joint movement<br />
(+100%). Excellent repair system <strong>for</strong> cracked or improperly sealed<br />
joints.<br />
feATuReS & BenefiTS:<br />
• Seismic testing.<br />
• Replaces mineral wool in construction joints.<br />
• Tested to ASTM E 1966 and ANSI/UL 2079.<br />
• Clean, professional appearance.<br />
• Can be used to repair cracked joints.<br />
• Use with other SpecSeal ® <strong>Firestop</strong> <strong>Products</strong>.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
08144 SFjP40 Fire Rated joint Profile Forming Material 1 100 1.00<br />
oRdeRing infoRMATion<br />
fyReflAnge ducT Angle<br />
FyreFlange firestop angle provides duct support and<br />
firestopping in one product. It has a factory applied intumescent<br />
gasket and is designed and engineered to eliminate the need <strong>for</strong><br />
firestop caulk and backing materials. FyreFlange saves time and<br />
labor while providing excellent fire protection.<br />
feATuReS & BenefiTS:<br />
• Single stage installation.<br />
• Economical - saves labor.<br />
• Clearly marked <strong>for</strong> easy inspection.<br />
• Red color <strong>for</strong> easy identification.<br />
• No additional firestop or backing materials required.<br />
• Eliminates the need <strong>for</strong> multiple inspections.<br />
• Can be installed over or under duct insulation.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
32208 FFA2208 Fyreflange Steel Angle 2” x 2” x 96” (51 mm x 51 mm x 244 cm) 1 6 4.25<br />
30022 FFc22 corner Angle Pack - 8 per pack 1 n/a .81<br />
30023 FFS22 Fyreflange Splice - 6 per pack 1 n/a .70<br />
JoInt SYStem<br />
ApplicATionS<br />
• Head of wall construction joints.<br />
• Fluted deck.<br />
• Flat slab.<br />
• Repair/retrofit of cracked joints.<br />
fIreStoP anGle<br />
ApplicATionS<br />
• For use with max. 2 in. thick light<br />
density insulation, insulated or noninsulated<br />
ducts in walls.<br />
• UL Classified ® sytems <strong>for</strong> HvAc ducts<br />
through gypsum and masonry walls.<br />
9
fIreStoP collarS<br />
oRdeRing infoRMATion<br />
inTuMeScenT fiReSTop collARS<br />
The Right Combination of Price & Per<strong>for</strong>mance.<br />
The economical solution <strong>for</strong> firestopping common plastic pipe that<br />
doesn’t compromise safety or per<strong>for</strong>mance.<br />
feATuReS & BenefiTS:<br />
• Easy installation - uses STI’s quick closure design.<br />
• Compact profile - use it in all the tight spots!<br />
• Water-resistant - no water soluble or hygroscopic ingredients.<br />
• Fast-acting expansion (up to 60x) - to seal off burning pipes.<br />
• Safe <strong>for</strong> contact with plastics.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
03901 lcc150 For 1.5” (3.8 cm) dia. Plastic Pipe 1 6 0.22<br />
03902 lcc200 For 2.0” (5.1 cm) dia. Plastic Pipe 1 6 0.25<br />
03903 lcc300 For 3.0” (7.6 cm) dia. Plastic Pipe 1 6 0.49<br />
03904 lcc400 For 4.0” (10.2 cm) dia. Plastic Pipe 1 6 0.73<br />
03600 SSc600 For 6.0” (15.2 cm) dia. Plastic Pipe 1 2 4.67<br />
Patent Pending<br />
oRdeRing infoRMATion<br />
RTc inTuMeScenT fiReSTop collARS<br />
Factory-manufactured device designed to seal plastic pipes penetrating<br />
fire rated walls and floors.<br />
feATuReS & BenefiTS:<br />
• Adjustable - one collar fits 3” and 4” pipes and corresponding couplings.<br />
• Rapid expansion - closes off burning pipes quickly.<br />
• Small profile - use it in all the tight spots!<br />
• Flexible and durable - no loose flakes (eye hazards).<br />
• Water-resistant - no water soluble or hygroscopic ingredients.<br />
• Economical - lower installed cost.<br />
• High volume char - expands up to 60 times!<br />
• Replaces traditional field-erected wrap strip/restraining collar systems <strong>for</strong><br />
pipe couplings.<br />
• Reduces inventory - one convenient product covers 3 and 4 in. trade size<br />
pipes. Use caulk <strong>for</strong> 2 in. and smaller trade size pipes!<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
03835 RTc350 For 3” (7.6 cm) and 4” (10.2 cm) Trade Size Pipe and corresponding couplings 1 6 0.70<br />
ApplicATionS<br />
• Combustible penetrants (factory<br />
manufactured).<br />
• Protects a variety of plastic pipes -<br />
Pvc, Pvc Foam core (ccPvc), cPvc,<br />
AbS, and AbS Foam core (ccAbS).<br />
• Vented (DWV) and closed (electrical<br />
conduit and water supply) installations.<br />
ApplicATionS<br />
• Protects a variety of plastic pipes and<br />
couplings including Pvc, Pvc cellular<br />
core (ccPvc), cPvc, AbS, and AbS<br />
cellular core (ccAbS).<br />
• Both vented (DWV) and closed (electrical<br />
conduit or water supply) installations.<br />
• All common constructions including<br />
concrete floors, concrete over steel<br />
deck, concrete walls, concrete block<br />
wall, gypsum board/stud walls, wood<br />
flooring/ceiling assemblies.<br />
10 1.800.992.1180
oRdeRing infoRMATion<br />
www.stifirestop.com<br />
WraP StrIPS and reStraInInG collarS<br />
SSW inTuMeScenT WRAp STRipS<br />
When you need a great solution <strong>for</strong> firestopping insulated and<br />
combustible pipe penetrations choose RED2 Wrap Strip. If your<br />
project takes you beyond stock PVC and ABS piping and into the<br />
tougher-to-protect plastics like PP, FRPP and PVDF, you need the<br />
unmatched power and protection of BLU and BLU2 Wrap Strips!<br />
feATuReS & BenefiTS:<br />
The industry’s broadest range of ul ® classified systems including<br />
the largest tested plastic pipes!<br />
• Easy installation - soft and flexible, less strip and less fasteners needed.<br />
• Rapid expansion - closes off burning penetrants faster.<br />
• High volume char - significant expansion seals off opening!<br />
• Water-resistant - no soluble or hygroscopic ingredients.<br />
• Economical - 12’ roll means no piecing…less waste!<br />
• Highly flexible - no foil...soft...supple...easier to install!<br />
• versatile per<strong>for</strong>mer - <strong>for</strong> a wide range of complex applications.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
03701 SSWblu blue Wrap Strip (2”Wx3/16”Tx12’l) 1 8 2.83<br />
03711 SSWblu2 blue Wrap Strip (2”Wx1/8”Tx12’l) 1 8 1.59<br />
03720 SSWblu220 1/8” Thick x 1.5” W x 8” l - Precut Wrap Strip <strong>for</strong> 2” Pipe 25 25 1.64<br />
03730 SSWblu230 1/8” Thick x 3” W x 11-3/16” l - Precut Wrap Strip <strong>for</strong> 3” Pipe 25 25 4.74<br />
03740 SSWblu240 1/8” Thick x 4” W x 14-5/8” l - Precut Wrap Strip <strong>for</strong> 4” Pipe 25 25 7.82<br />
03125 SSW125 1/8” Thick x 1-1/2” W x 8-1/8” l - Precut Wrap Strip <strong>for</strong> 2” Pipe 25 - 1.38<br />
03250 SSW250 1/4” Thick x 1-1/2” W x 12-1/8” l - Precut Wrap Strip <strong>for</strong> 3” Pipe 25 - 5.13<br />
03375 SSW375 3/8” Thick x 1-1/2” W x 16-1/8” l - Precut Wrap Strip <strong>for</strong> 4” Pipe 25 - 8.88<br />
03702 SSWREd Red Wrap Strip (1.5” W x 1/4” T x 12’ l) 1 10 3.03<br />
03712 SSWREd2 Red Wrap Strip (1.5”Wx1/8”Tx12’l) 1 8 1.14<br />
03750 SSWRc Metal Restraining collar 25’ (For use with SSWblu) 1 1 5.06<br />
03752 SSWRc2 Metal Restraining collar 25’ (For use with SSWREd) 1 1 3.76<br />
03753 WSc-8 Pre<strong>for</strong>med Restraining collar <strong>for</strong> 6” & 8” Plastic Pipe <strong>for</strong> use with blu/blu2 1 1 1.52<br />
03754 WSc-8REd Pre<strong>for</strong>med Restraining collar <strong>for</strong> 6” Plastic Pipe <strong>for</strong> use with REd/REd2 1 1 1.06<br />
03760 WSc-12 Pre<strong>for</strong>med Restraining collar <strong>for</strong> 10” & 12” Plastic Pipe <strong>for</strong> use with blu/blu2 1 1 2.00<br />
STI has several accessories available <strong>for</strong> installing firestop. Caulk tubes, mineral wool boards and<br />
even warning labels <strong>for</strong> labeling your barriers.<br />
oRdeRing infoRMATion<br />
uPc # Part # description Qty. case Qty.<br />
Weight<br />
Each - lbs.<br />
05001 SSAMW Mineral Wool boards (2) 2’x4’x1.5” Per box (5.08 x 10.16 x 3.81 cm) 1 - 12.00<br />
05020 SSAcg caulk gun (11 oz.) 1 4 1.49<br />
05021 SSAQcg 29 oz. caulk gun 1 - 2.50<br />
05022 SSAScg 20 oz. caulk gun 1 - 2.90<br />
09554 Z1002-892-cg <strong>Firestop</strong> Penetration Warning label (5 3/8” x 4 1/2”) (13.65 x 11.43 cm) 1 1000/roll 0.01<br />
03775 SSWFT Foil Tape 2” x 30’ 1 6 0.44<br />
ApplicATionS<br />
• <strong>Firestop</strong>ping combustible penetrants<br />
such as nonmetallic pipes or pipe<br />
insulation.<br />
• All common <strong>for</strong>ms of construction -<br />
concrete floors, concrete over steel<br />
deck, concrete walls, concrete block<br />
walls, gypsum board/stud walls, and<br />
wood floor/ceiling assemblies.<br />
• Can be used with restraining collars<br />
or as a tuck-in.<br />
fIreStoP anGle<br />
fIreStoP acceSSorIeS<br />
11
PathWaYS<br />
®<br />
conTinuouSly STopping fiRe - WiThouT conTinuouSly fiReSTopping<br />
SpecificATionS<br />
• Maximum resistance to fire and smoke whether empty or 100% visually<br />
filled.<br />
• Assures fire and smoke protection with every new or retrofit cable<br />
installation.<br />
• Superior fire and smoke leakage vs. standard sleeve and putty systems.<br />
• Unlike conventional sleeve and putty system, EZ-Path ® remains fire and<br />
smoke compliant 100% of the time!<br />
• U.S. Patent 6,732,481.<br />
• Built-in firestopping system automatically adjusts to the number of<br />
cables installed — assures it is firestopped — even at maximum cable<br />
loading.<br />
• Intumescent material rapidly responds to flames or heat by quickly<br />
sealing the pathways and preventing the passage of flames and smoke.<br />
• Excellent F, T & L Ratings.<br />
• Published total leakage area values - no additional putty or pieces to<br />
maintain ratings.<br />
• UL ® classified and FM Approved in accordance with ASTM E814 (ul 1479).<br />
• UL systems are available <strong>for</strong> up to 4 hour rated floor and wall constructions.<br />
FIRESTOP dEvIcE FOR uSE IN THROugH-PENETRATION FIRESTOP<br />
SYSTEMS. SEE ul dIREcTORY OF PROducTS cERTIFIEd FOR<br />
cANAdA ANd ul FIRE RESISTANcE dIREcTORY.<br />
MAxiMuM fiRe And SMoke pRoTecTion<br />
All data, video, and communications cable bundles shall utilize an enclosed fire rated<br />
pathway device wherever said cables penetrate rated walls. The fire-rated pathway<br />
shall contain a built-in fire sealing system sufficient to maintain the hourly fire rating<br />
of the barrier being penetrated. The self-contained sealing system shall automatically<br />
adjust to the installed cable loading and shall permit cables to be installed, removed,<br />
or retrofitted without the need to adjust, remove or reinstall firestop materials. The<br />
pathway shall be ul ® classified and/or FM Systems Approved and tested to the<br />
requirements of ASTM E814 (ul1479).<br />
Specified divisions<br />
dIv. 7 07 84 00 Penetration <strong>Firestop</strong>ping<br />
dIv. 26 26 00 00 Electrical<br />
dIv. 27 27 00 00 communications<br />
12 1.800.992.1180
SOFTEN<br />
chooSe The RighT eZ-pATh ® configuRATion foR youR cABling needS!<br />
www.stifirestop.com<br />
pAyS foR iTSelf in A feW chAngeS... A ZeRo MAinTenAnce SoluTion<br />
Height x Width<br />
Inches (mm)<br />
length<br />
Inches (mm)<br />
PathWaYS<br />
Series 22 Series 33 Series 44<br />
1.5” x 1.5”<br />
(38 mm x 38 mm)<br />
3.0” x 3.0”<br />
(76 mm x 76 mm)<br />
4” x 4-5/8”<br />
(102 mm x 118 mm)<br />
10.5” (267 mm) 10.5” (267 mm) 14” (356 mm)<br />
volume Expansion 40x 16x 16x<br />
can be ganged up to 3 up to 7<br />
up to 5 in walls<br />
up to 16 in floors<br />
can be lengthened -- 6” (152 mm) increments --<br />
Insert into cored Hole 2” (51 mm) 4” (102 mm) 6” (153 mm)<br />
Attached to conduit -- 4” (102 mm) --<br />
Fire Rated in Walls up to 4 hours up to 4 hours up to 4 hours<br />
Fire Rated in Floors -- up to 4 hours up to 4 hours<br />
Approx. Max cable capacity 25 + 120 + 244 +<br />
Approx. Max cable capacity<br />
(ganged)<br />
Approx. Max cable capacity<br />
(grid)<br />
When compared to<br />
traditional sleeves<br />
sealed with sealant<br />
or putty, EZ-Path ® will<br />
have paid <strong>for</strong> itself<br />
in just three cable<br />
changes or less. The<br />
savings will increase<br />
with each additional<br />
cable change.<br />
• All-in-one design installs in minutes.<br />
• Conveniently packaged kits <strong>for</strong> easy installation — no additional<br />
parts to order.<br />
• Splits apart <strong>for</strong> old work.<br />
• Wide range of accessories.<br />
• Group pathways <strong>for</strong> additional capacity.<br />
• Organizes and manages cables.<br />
• Clean, professional, engineered appearance.<br />
• Easy moves, adds and changes.<br />
• Can be installed as the wall is being built.<br />
75 + 840 + 1,220 +<br />
-- -- 3,904 + in floors<br />
Cable capacity estimates are based upon using CAT5. Cable diameters vary widely by manufacturer. Consult STI’s cable estimator online <strong>for</strong> accurate estimates.<br />
www.stifirestop.com/ezpath<br />
®<br />
13
PathWaYS<br />
®<br />
fiReSTopping iS no longeR The pRoBleM... iT’S The SoluTion!<br />
All pathway kits are conveniently packaged with 22, 33, and 44 Series EZ-PATH ® Fire Rated Pathways, plates, gaskets and labels <strong>for</strong> installation!<br />
• An EZ-Path ® Solution <strong>for</strong> high volume cable penetrations through<br />
floors.<br />
• A bolt-in solution <strong>for</strong> riser applications that brings the safety and<br />
simplicity of EZ-Path ® to your vertical cable installations.<br />
• The EZ-Path ® Modular Floor grid System can handle literally thousands<br />
of cables.<br />
• Modular Floor Grid Systems utilize the high volume, EZ-Path ® 44<br />
Series Pathways installed in banks of four to provide your cabling<br />
systems with room to grow.<br />
• Organize cables by type, use or trade.<br />
• Install in walls or floors to provide managed portals to route cables.<br />
• Install one or gang them up <strong>for</strong> additional capacity and better cable<br />
organization!<br />
ModulAR flooR gRid SySTeM<br />
Sturdy steel grids mount one, two or four banks or pathways in built-in slots <strong>for</strong> a total of up to sixteen pathways through a single<br />
floor opening. A single bank Floor grid comes complete with pathways. Multi-bank Modular Floor grids are installed with firestop<br />
panels sealing each slot. As additional cable capacity is required, firestop panels are removed and pathway modules containing<br />
four pathways are installed in each slot.<br />
For our easy-to-use installation guide on the complete EZ-PATH ® Fire Rated Pathway product line,<br />
contact STI customer service or download a copy at www.stifirestop.com/literature.<br />
14 1.800.992.1180
upc<br />
730573-<br />
www.stifirestop.com<br />
cATAlog<br />
nuMBeR deScRipTion<br />
Series 22 eZ-path ® fire-Rated pathway kits*<br />
oRdeRing infoRMATion<br />
PathWaYS<br />
Min. QTy/<br />
cASe QTy.<br />
00022 EZd22 † Series 22 - Fire-Rated Pathway kit 6<br />
Series 33 eZ-path ® fire-Rated pathway, kits*, Accessories and plate packs**<br />
00004 EZd33FWS † Series 33 - Fire-Rated Pathway device 6<br />
00034 EZdP33FWS Series 33 - Square kit - device with square wall plate pack 4<br />
00035 EZdP133cWk Series 33 - circular kit - device with circular wall plate pack 1<br />
00005 EZd33E Series 33 - Extension Module 1<br />
00533 EZdP33WR Series 33 - Retro-Fit kit - device with retro-fit wall plate pack 1<br />
00835 EZdP133Fk Series 33 - kick in kit - device with kick-in plate pack 1<br />
00235 EZdP233gk Series 33 - Two-gang kit - Two (2) devices with two-gang plate pack 1<br />
00335 EZdP333gk Series 33 - Three-gang kit - Three (3) devices with three-gang plate pack 1<br />
00435 EZdP433gk Series 33 - Four-gang kit - Four (4) devices with four-gang plate pack 1<br />
00436 EZdP433gk-c<br />
Series 33 - color coded Four-gang kit<br />
Four (4) devices (1-orange, 1-blue, 1-yellow, 1-white) with four-gang plate pack<br />
00735 EZdP733gk Series 33 - Seven-gang kit - Seven (7) devices with seven-gang plate pack 1<br />
00036 EZdP133cAk Series 33 - conduit Attachment kit-device with conduit attachment plate pack 1<br />
00137 EZP133cW Series 33 - circular Wall Plate Pack 1<br />
00133 EZP133W Series 33 - Single Square Wall Plate Pack 1<br />
00233 EZP233W Series 33 - double Wall Plate Pack 1<br />
00333 EZP333W Series 33 - Triple Wall Plate Pack 1<br />
00433 EZP433W Series 33 - Four-gang Plate Pack 1<br />
00733 EZP733W Series 33 - Seven-gang Plate Pack 1<br />
00135 EZP133Pc Series 33 - One Pair (2) Positioning clamps 1<br />
00833 EZP133k Series 33 - Single kick-In Plate Pack - (For use with floor applications) 6<br />
00535 EZP133R Series 33 - Retro-Fit Mounting Plate Pack 1<br />
00138 EZP133cA Series 33 - conduit Attachment Plate Pack 1<br />
00933 RcM33 Series 33 - One Pair (2) Radius control Modules 1<br />
Series 44 eZ-path ® fire-Rated pathway, kits*, grid Assemblies, and plate packs**<br />
00007 EZd44 Series 44 - Fire-Rated Pathway device 4<br />
00044 EZdP44 Series 44 - Fire-Rated Pathway kit - device with single wall plate pack 1<br />
00045 EZdP144Fk Series 44 - Floor kit - device with floor plate pack 1<br />
00444 EZdg444 Series 44 - Single bank Floor grid - Four (4) devices with floor frame 1<br />
00048 EZd444Mb Series 44 - Single bank of devices - Four (4) devices with hanger bracket 1<br />
00845 EZdg844 Series 44 - Multi-slot Frame kit <strong>for</strong> 8 Pathways - (Includes eight (8) Series 44 devices with EZg844) 1<br />
00645 EZdg1644 Series 44 - Multi-slot Frame kit <strong>for</strong> 16 Pathways - (Includes sixteen (16) Series 44 devices with EZg1644) 1<br />
00144 EZP144W Series 44 - Single Wall Plate Pack 1<br />
00544 EZP544W Series 44 - Multi-gang Wall Plate Pack 1<br />
00834 EZP144F Series 44 - Split Floor Plate Pack 1<br />
00844 EZg844 Series 44 - Multi-Slot Frame <strong>for</strong> Eight (8) Pathways 1<br />
00644 EZg1644 Series 44 - Multi-Slot Frame <strong>for</strong> Sixteen (16) Pathways 1<br />
* All Kits include appropriate quantity of pathways, wall plates, gaskets, labels, required set screws and an allen key. **All plate packs include wall plates, gaskets, labels, required set screws and an allen key.<br />
† Available in custom colors on a special order basis in yellow, blue and white.<br />
1<br />
15
fIreStoP comPoSIte Sheet<br />
oRdeRing infoRMATion<br />
coMpoSiTe SheeT<br />
Lightweight, easily fabricated panels surface mount to walls and<br />
floors to provide a neat, clean firestop seal <strong>for</strong> medium to large<br />
openings with a variety of penetrants in fire-rated floors and walls.<br />
feATuReS & BenefiTS:<br />
• Lighter and thinner - approximately 1/2 the weight and thickness of<br />
traditional composite sheet.<br />
• Easier to fabricate - engineered with the installer in mind.<br />
• Can be cut and installed with common sheet metal tools.<br />
• Intumescent - expands up to 15 times when exposed to temperatures in<br />
excess of 350°F (177°c) compared to 8-10 times <strong>for</strong> competing brands.<br />
Forms a dense insulative char that minimizes heat transfer.<br />
• Hole reduction - reduces large openings when used in conjunction with<br />
other SpecSeal ® or EZ-Path ® <strong>Firestop</strong> <strong>Products</strong>.<br />
• Tested to ASTM E 814 (ANSI/UL 1479).<br />
• Acoustically tested - reduces sound transmission.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
11628 cS1628 16 x 28 in. (41 x 71 cm) composite Sheet 1 2 4.40<br />
12436 cS2436 24 x 36 in. (61 x 92 cm) composite Sheet 1 2 8.40<br />
13636 cS3636 36 x 36 in. (92 x 92 cm) composite Sheet 1 2 12.60<br />
14136 cS3641 36 x 41 in. (92 x 104 cm) composite Sheet 1 2 14.40<br />
15228 cS2852 28 x 52 in. (71 x 132 cm) composite Sheet 1 2 14.20<br />
fIreStoP mortar<br />
oRdeRing infoRMATion<br />
SSM fiReSTop MoRTAR<br />
A Lightweight, Cementitious, Fire-Rated Compound.<br />
SpecSeal ® <strong>Firestop</strong> Mortar is suitable <strong>for</strong> openings of all sizes. Its<br />
method of application makes it specifically useful <strong>for</strong> medium to<br />
large openings through concrete or masonry floors or walls with<br />
simple to very complicated combinations of penetrants.<br />
feATuReS & BenefiTS:<br />
• Light weight/low density - less <strong>for</strong>ming and support required. Easy retrofit!<br />
• Fast drying - <strong>for</strong>ms come down faster!<br />
• Economical - highest yield per pound means lower installed cost.<br />
• Wide range of application - includes aluminum cable tray.<br />
• Red color - easy identification and inspection.<br />
• Chemical adhesion - reduces the need <strong>for</strong> expensive and<br />
time-consuming concrete fasteners.<br />
• Trowelable and self-leveling.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
04106 SSM106 Mortar 6 gal. Pail (22 lbs., 10 kilos) 1 n/a 24.00<br />
04200 SSM22b Mortar bag (22 lbs., 10 kilos) 1 n/a 23.00<br />
ApplicATionS<br />
• Medium to large openings through<br />
common constructions.<br />
• Single or multiple cable trays <strong>for</strong><br />
power, voice, data.<br />
• Bus ducts.<br />
• Multiple metallic conduits & tubing.<br />
Multiple mixed penetrants of many<br />
types.<br />
• Blank Openings (penetrants removed).<br />
• Suitable <strong>for</strong> clean room/area<br />
environment.<br />
• Combine with the EZ-PATH® System<br />
<strong>for</strong> cable penetrations through large<br />
openings.<br />
• Plastic pipes.<br />
• Insulated metallic pipes.<br />
• Metal pipes.<br />
ApplicATionS<br />
• Large openings through concrete<br />
floors and walls.<br />
• Cable trays.<br />
• Bus duct.<br />
• Multiple pipes.<br />
• Insulated pipes.<br />
• Plastic pipes.<br />
• Cables<br />
16 1.800.992.1180
oRdeRing infoRMATion<br />
oRdeRing infoRMATion<br />
www.stifirestop.com<br />
SSB inTuMeScenT fiReSTop pilloWS<br />
Compressible cushions can be easily installed and removed. The<br />
perfect firestop solution <strong>for</strong> medium to large openings including<br />
cable bundles, cable trays, bus ducts and multiple conduits.<br />
feATuReS & BenefiTS:<br />
• Intumescent - expands in all directions <strong>for</strong> a tough, tight seal.<br />
• Re-installable <strong>for</strong> easy retrofitting of cables.<br />
• Single side application makes installation easy <strong>for</strong> tough access<br />
openings.<br />
• Heat-sealed poly cover protects core and makes pillows slide in and out<br />
with ease.<br />
• Superior air leakage ratings!<br />
• Broad base of tested systems.<br />
• UL Classified (up to 4 hr.).<br />
• FM Approved.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
06140 SSb14 <strong>Firestop</strong> Pillow 1”x 4”x 9” (2.5 x 10 x 23 cm) 1 20 0.18<br />
06240 SSb24 <strong>Firestop</strong> Pillow 2”x 4”x 9” (5.0 x 10 x 23 cm) 1 10 0.27<br />
06260 SSb26 <strong>Firestop</strong> Pillow 2”x 6”x 9” (5.0 x 15 x 23 cm) 1 22 0.35<br />
06360 SSb36 <strong>Firestop</strong> Pillow 3”x 6”x 9” (7.6 x 15 x 23 cm) 1 16 0.48<br />
SSp inTuMeScenT fiReSTop puTTy<br />
Non-hardening, intumescent putty is easily installed and removed<br />
making it the perfect choice <strong>for</strong> cable penetrations requiring<br />
occasional retrofitting.<br />
feATuReS & BenefiTS:<br />
• Non-hardening <strong>for</strong> easy installation and retrofitting of cables.<br />
• Two-stage intumescence provides aggressive expansion.<br />
• Highly adhesive: stays put!<br />
• Unaffected by humidity, condensation, water.<br />
• Soft, pliable, easy to install.<br />
• Tested and proven acoustical properties.<br />
• No tools required.<br />
• UL Classified (up to 3 hr.)<br />
• FM Approved.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
02100 SSP100 Putty 36 cu. In. Tube (.6 l) 1 6 2.30<br />
02101 SSP28 Putty 24 cu. In. Tube (.39 l) 1 1 1.85<br />
fIreStoP PIlloWS<br />
ApplicATionS<br />
• Medium to large openings through<br />
common constructions.<br />
• Loose cable <strong>for</strong> power, voice, data.<br />
• Single or multiple cable trays <strong>for</strong><br />
power, voice, data.<br />
• Bus ducts.<br />
• Multiple metallic conduits & tubing.<br />
• Multiple, mixed penetrants of all<br />
types.<br />
fIreStoP PuttY<br />
ApplicATionS<br />
• Small to medium openings through<br />
common constructions.<br />
• Single or multiple cables <strong>for</strong> power,<br />
voice, data.<br />
• Single or multiple cable trays <strong>for</strong><br />
power, voice, data.<br />
• Sleeved openings <strong>for</strong> cable bundles<br />
• Conduits.<br />
17
fIreStoP SleeveS<br />
oRdeRing infoRMATion<br />
ReAdy Sleeve<br />
A complete code compliant firestop sleeve assembly <strong>for</strong> new cable<br />
installations. Includes all mounting hardware and internal and<br />
external firestop sealing materials. Available in 1” (33 mm OD),<br />
2” (60 mm OD), and 4” (114 mm OD) sizes with standard or large<br />
escutcheon plates.<br />
feATuReS & BenefiTS:<br />
• Complete! Includes sleeve, all mounting hardware, firestopping<br />
materials.<br />
• Saves money by reducing expensive shop and field labor.<br />
• Standard and large escutcheons available.<br />
• Meets code requirements <strong>for</strong> internal/external firestop sealing.<br />
• Meets code requirements <strong>for</strong> wall attachment.<br />
• Built-in bushings protect cables.*<br />
• Includes SpecSeal® Series SSP Intumescent <strong>Firestop</strong> Putty sufficient<br />
<strong>for</strong> 1” (25 mm) depth at both ends.<br />
• UL Classified (up to 4 hr.)<br />
* Standard <strong>for</strong> 2”(60 mm OD) and 4”(114 mm OD) sizes. Separate bushing<br />
provided <strong>for</strong> 1” (25 mm).<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
20100 FS100 1” (25 mm) <strong>Firestop</strong> Sleeve 1 6 1.00<br />
20200 FS200 2” (51 mm) <strong>Firestop</strong> Sleeve 1 6 2.00<br />
20400 FS400 4” (102 mm) <strong>Firestop</strong> Sleeve 1 6 4.00<br />
20201 FS201 2” (51 mm) <strong>Firestop</strong> Sleeve w/ large escutcheon plates 1 n/a 2.90<br />
20401 FS401 4” (102 mm) <strong>Firestop</strong> Sleeve w/ large escutcheon plates 1 n/a 4.80<br />
oRdeRing infoRMATion<br />
ReAdy SpliT Sleeve<br />
Ready Sleeve convenience <strong>for</strong> existing cable installations. Split<br />
sleeve and two-piece wall plates allow sleeve to be assembled<br />
around cables and locked into the wall or floor. Available in 1” (33<br />
mm OD), 2” (60 mm OD), and 4” (114 mm OD) sizes.<br />
feATuReS & BenefiTS:<br />
• Complete! Includes split sleeve, all mounting hardware, firestopping<br />
materials.<br />
• Over-sized plates <strong>for</strong> larger or irregular openings.<br />
• Built-in bushings protect cables.<br />
• Meets code requirements <strong>for</strong> internal/external firestop sealing.<br />
• Optional wall attachment points provided <strong>for</strong> sleeve stabilization.<br />
• Includes SpecSeal® <strong>Firestop</strong> Putty as well as split external firestop<br />
gasket.<br />
• UL Classified (up to 4 hr ).<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
21000 FSR100 1” (25 mm) Split <strong>Firestop</strong> Sleeve 1 4 1.25<br />
22000 FSR200 2” (51 mm) Split <strong>Firestop</strong> Sleeve 1 4 2.50<br />
24000 FSR400 4” (102 mm) Split <strong>Firestop</strong> Sleeve 1 4 6.25<br />
ApplicATionS<br />
• Protect, support and seal cables<br />
routed through rated and non-rated<br />
walls & floors.<br />
• All common constructions up to 10”<br />
(250 mm) thick.<br />
• Available trade sizes 1” (33 mm OD),<br />
2” (60 mm Od), 4” (114 mm Od).<br />
• Standard small escutcheons <strong>for</strong><br />
accurate gypsum board openings.<br />
• Large escutcheons <strong>for</strong> concrete or<br />
masonry openings.<br />
ApplicATionS<br />
• New or existing cable installations<br />
through walls or floors.<br />
• All common constructions up to 10”<br />
(250 mm) thick.<br />
• Available trade sizes 1” (33 mm OD),<br />
2” (60 mm Od), 4” (114 mm Od).<br />
• Oversized or irregular openings.<br />
18 1.800.992.1180
oRdeRing infoRMATion<br />
www.stifirestop.com<br />
poWeRShield elecTRicAl Box inSeRTS<br />
When used within metallic switch and receptacle boxes, inserts<br />
are UL Tested and Classified to permit larger boxes and reduced<br />
spacing.<br />
feATuReS & BenefiTS:<br />
• Easy installation! Just peel and stick to inside of box.<br />
• Can be installed be<strong>for</strong>e or after wall is closed.<br />
• Non-conductive liner face.<br />
• Easy retrofit installation.<br />
• Low profile <strong>for</strong> minimum impact on box volume.<br />
• Tested and proven acoustical properties.<br />
• One step installation saves time and labor.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
02500 EP44 Electrical box Insert 3 3/4” x 3 3/4” x 1/8” pad 1 20 0.09<br />
02505 EP45 Electrical box Insert 4-1/4” x 4-1/4” x 1/8” pad 1 20 0.10<br />
oRdeRing infoRMATion<br />
SSp inTuMeScenT puTTy pAdS<br />
Externally applied to switch and receptacle boxes, pads are UL<br />
tested and Classified to permit larger boxes and reduced spacing<br />
in gypsum board walls.<br />
feATuReS & BenefiTS:<br />
• Fits common 4S box with no cutting or trimming.<br />
• Two-Stage intumescence provides aggressive expansion.<br />
• Highly adhesive: stays put.<br />
• Unaffected by humidity, condensation, water.<br />
• Soft, pliable, easy to install.<br />
• Tested and proven acoustical properties.<br />
• Poly liner allows hands-off, clean installation.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
02200 SSP4S Putty Pad 7.25” x 7.25” x 3/16” 1 20 0.59<br />
02300 SSP9S Putty Pad 9.00” x 9.00” x 3/16” 1 20 0.99<br />
oRdeRing infoRMATion<br />
cABle SpRAy<br />
Water-based, spray-applied coating used to provide short term<br />
circuit integrity and improved flame spread characteristics <strong>for</strong><br />
grouped electrical cables.<br />
feATuReS & BenefiTS:<br />
• Easy and economical to use.<br />
• Water-based - easy cleanup, installation and disposal.<br />
• Low friction <strong>for</strong>mula - Less pump wear.<br />
• Brushable <strong>for</strong> touch ups and spot repairs.<br />
uPc # Part # description Qty. case Qty. Weight<br />
Each - lbs.<br />
07104 cS105 cable Spray 5 gal. (1,155 cu.In., 19.0 l) Pail 1 n/a 55.00<br />
electrIcal box InSertS<br />
ApplicATionS<br />
• Single & multi-gang metallic boxes up<br />
to 14” (356 mm) long.<br />
• A variety of non-metallic boxes.<br />
• Plastic & steel faceplates.<br />
• 1& 2 hr. wood or steel stud walls.<br />
fIreStoP PuttY PadS<br />
ApplicATionS<br />
• Single & multi-gang metallic boxes up<br />
to 14” (356 mm) long.<br />
• A variety of non-metallic boxes.<br />
• Plastic & steel faceplates.<br />
• 1& 2 hr. wood or steel stud walls.<br />
fIreStoP SPraY<br />
aPPlIcatIonS<br />
• Encapsulate grouped cables.<br />
• Apply as fire breaks in cable tray runs.<br />
19
Distributed By:<br />
STI is a member of the following industry organizations:<br />
200 Evans Way<br />
Somerville, Nj 08876 uSA<br />
Toll Free: 800-992-1180<br />
Fax: 908-526-9623<br />
e-mail: specseal@stifirestop.com<br />
www.stifirestop.com<br />
ZSTI 3113 Rev: 10/2009<br />
SpecSeal ® , EZ-Path ® , Triple S ® and Speed Flex are registered trademarks of Specified Technologies Inc.<br />
FyreFlange TM , Ready TM , Powershield TM , Fast Tack and High-Traffic are trademarks of Specified<br />
Technologies Inc. Pensil is a registered trademark of general Electric company. ul ® is a registered<br />
trademark of underwriters laboratories, Inc.<br />
© copyright 2009. All rights reserved.