manual MAP1 en - Audionet

More documents

Recommendations

Info

• The USB Audio input of the MAP 1 is a fully-fledged digital input like all other inputs. Therefore, you can use all features of the MAP 1 with the USB Audio input, too, that apply to stereo PCM signals like Dolby Pro Logic IIx or DTS Neo:6. Also, the parametric digital equalizer is available as well as bass and delay management. • If the USB Audio connection from your computer to the MAP 1 is interrupted, the MAP 1 will issue the warning Receiver Out Of Lock!. When the connection is established again, the MAP 1 will prompt the same messages as with all other digital inputs (see chapter 'Display'). • In case you would like to check, if Microsoft Windows recognized your MAP 1 correctly, please open up the Device Manager of your Windows system. You will find the MAP 1 in the following 3 places in the list of devices: Sound, video and game controllers → USB Audio Device Human Interface Devices → USB Human Interface Device Universal Serial Bus controllers → USB Composite Device. The diagram on the following page gives an overview of an example list of entries in the Device Manager. 52
Example entries in Device Manager: 53
Page 1: Multi Channel Audio/Video Pre - Amp
Page 4 and 5: Placement and connection Important:
Page 6 and 7: Overview of connections 7 Digital i
Page 8 and 9: (refer to owner's manual of VIP), t
Page 10 and 11: configured. Your MAP 1 needs inform
Page 12 and 13: Overview of menu structure RUN Mode
Page 14 and 15: 5 Activities key: Press this key to
Page 16 and 17: 3 Vol+ , increases the volume of th
Page 18 and 19: Screen page 3 MAP 1: 3/9 pages Curr
Page 20 and 21: If this reference level is set corr
Page 22 and 23: to the names of the other user sett
Page 24 and 25: Leave the equalizer setup mode by u
Page 26 and 27: Setup Description of all menu items
Page 28 and 29: Menu Channel Setup This menu compri
Page 30 and 31: Edit Channel Name: While in menu Ch
Page 32 and 33: Note: • This menu item is only av
Page 34 and 35: Note: • This setting refers to Li
Page 36 and 37: Subwoofer: If a subwoofer is availa
Page 38 and 39: Display While in RUN mode the 2 nd
Page 40 and 41: On the left of the 2 nd line the pr
Page 42 and 43: On Screen Display (OSD) Activate th
Page 44 and 45: setting for digital and analog DVI
Page 46 and 47: Note: • If the optional DVI Modul
Page 48 and 49: Settings for analog RGB-video outpu
Page 50 and 51: USB Audio With the USB Audio interf
Page 54 and 55: Security advice • Avoid packaging

manual MAP1 en - Audionet

Create successful ePaper yourself

Delete template?

Save as template?