manual MAP1 en - Audionet
manual MAP1 en - Audionet
manual MAP1 en - Audionet
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Note:<br />
• Many devices use the SCART connector for RGB video output. If your video source<br />
is equipped with a SCART output connector (e.g. the <strong>Audionet</strong> DVD player VIP), it<br />
has to be connected as follows:<br />
Pin assignm<strong>en</strong>t of the SCART-connector<br />
Signal SCART Pin DVI Pin<br />
Red 15 C1<br />
Gre<strong>en</strong> 11 C2<br />
Blue 7 C3<br />
C-Sync 19 C4<br />
Connection diagram for YUV or RGB video input using video inputs 4 and output 5 :<br />
16<br />
45<br />
V Y U<br />
= CB Y CR<br />
or<br />
B G R<br />
+Sync<br />
from output of video source<br />
Video outputs Progressive Scan Card:<br />
The output signal of the Progressive Scan Card is available at video output 16 . If only<br />
the Progressive Scan Card (and not the DVI Module) is installed, pins 8 and C1 to C4 of<br />
the DVI video connector provide the analog progressive video signal (see chapter 'Pin<br />
assignm<strong>en</strong>t DVI output connector ')
Change language