manual MAP1 en - Audionet
manual MAP1 en - Audionet manual MAP1 en - Audionet
Subwoofer: If a subwoofer is available in your speaker configuration, press Vol+ key to activate it (available). If a subwoofer is not available, press Vol- key to deactivate the subwoofer channel (not available). Note: • You can only switch off the subwoofer, if Front speakers are set to Large and no channel group is set to X-Bass. Otherwise the display shows Configuration not allowed if you press Vol- key. Set Subwoofer Phase: Select phase of the Subwoofer to normal or inverted. Important: The following additional conditions apply to the Bass Manager: • Channel group Front can not be set to None. • If Front is set to Small all other channel groups are forced to Small and the Subwoofer is activated. • Only if channel group Surround is available (= not None), group Back can be selected to any other than None. • If channel group Surround is switched to None, group Back is forced to None automatically. • If the Subwoofer is not available and one of the channel groups is set to X-Bass, the Subwoofer will be activated automatically (set to available). • If any channel group is set to X-Bass, the Subwoofer cannot be deactivated. 36
Menu Delay Manager Use this menu to enter the distances from your speakers to your listening position (Set Speaker Distance). The distance ranges from 0 to 1500 cm in steps of 5cm. Alternatively, you can enter the distances in inches (see 'Set Distance Unit'). According to the entered distances, the MAP 1 calculates the necessary delays of each channel to ensure, that all signals from all speakers arrive at the same time at the listening position. Use keys Vol- and Vol+ to enter the distance, select channel to be setup with keys Ch+ / Ch- . The order of channels is the same as in the Level Setup menu. Subwoofer Distance Offset: This option 'virtually' moves the subwoofer relative to the listening position (= adjusting the 'phase' of the subwoofer). Use positive values, if you want to delay the signal from the subwoofer relative to all other channels. Use negative values, if the signal from the subwoofer should arrive earlier than the signals from all other speakers. Set Distance Unit: To choose the unit for measuring the distances of speakers, use Vol+ to select Centimeter or Vol- to select Inches. Distances already entered into the system are converted to the selected unit automatically. 37
- Page 1: Multi Channel Audio/Video Pre - Amp
- Page 4 and 5: Placement and connection Important:
- Page 6 and 7: Overview of connections 7 Digital i
- Page 8 and 9: (refer to owner's manual of VIP), t
- Page 10 and 11: configured. Your MAP 1 needs inform
- Page 12 and 13: Overview of menu structure RUN Mode
- Page 14 and 15: 5 Activities key: Press this key to
- Page 16 and 17: 3 Vol+ , increases the volume of th
- Page 18 and 19: Screen page 3 MAP 1: 3/9 pages Curr
- Page 20 and 21: If this reference level is set corr
- Page 22 and 23: to the names of the other user sett
- Page 24 and 25: Leave the equalizer setup mode by u
- Page 26 and 27: Setup Description of all menu items
- Page 28 and 29: Menu Channel Setup This menu compri
- Page 30 and 31: Edit Channel Name: While in menu Ch
- Page 32 and 33: Note: • This menu item is only av
- Page 34 and 35: Note: • This setting refers to Li
- Page 38 and 39: Display While in RUN mode the 2 nd
- Page 40 and 41: On the left of the 2 nd line the pr
- Page 42 and 43: On Screen Display (OSD) Activate th
- Page 44 and 45: setting for digital and analog DVI
- Page 46 and 47: Note: • If the optional DVI Modul
- Page 48 and 49: Settings for analog RGB-video outpu
- Page 50 and 51: USB Audio With the USB Audio interf
- Page 52 and 53: • The USB Audio input of the MAP
- Page 54 and 55: Security advice • Avoid packaging
Subwoofer:<br />
If a subwoofer is available in your speaker configuration, press Vol+ key to activate it<br />
(available). If a subwoofer is not available, press Vol- key to deactivate the<br />
subwoofer channel (not available).<br />
Note:<br />
• You can only switch off the subwoofer, if Front speakers are set to Large and no<br />
channel group is set to X-Bass. Otherwise the display shows Configuration<br />
not allowed if you press Vol- key.<br />
Set Subwoofer Phase:<br />
Select phase of the Subwoofer to normal or inverted.<br />
Important:<br />
The following additional conditions apply to the Bass Manager:<br />
• Channel group Front can not be set to None.<br />
• If Front is set to Small all other channel groups are forced to Small and the<br />
Subwoofer is activated.<br />
• Only if channel group Surround is available (= not None), group Back can<br />
be selected to any other than None.<br />
• If channel group Surround is switched to None, group Back is forced to<br />
None automatically.<br />
• If the Subwoofer is not available and one of the channel groups is set to<br />
X-Bass, the Subwoofer will be activated automatically (set to available).<br />
• If any channel group is set to X-Bass, the Subwoofer cannot be deactivated.<br />
36