manual MAP1 en - Audionet
manual MAP1 en - Audionet manual MAP1 en - Audionet
Leave the equalizer setup mode by using one of the other setup menu keys. The MAP 1 then enters the corresponding menu. If you wait for approx. 12 seconds without pressing any key, the MAP 1 will return to RUN mode automatically. 1 MPE- selects the previous MPE *) filter of the current channel. 2 MPE+ selects the next MPE filter of the current channel. 3 Freq- decreases the center frequency of the current MPE filter. 4 Freq+ increases the center frequency of the current MPE filter. *) MPE = Minimum Phase Equalizer Screen page 8 MAP 1: 7/9 pages Current Activity 1 Q- decreases the Q-factor of the current MPE filter. 2 Q+ increases the Q-factor of the current MPE filter. 3 Gain- decreases the gain factor of the current MPE filter. 4 Gain+ increases the gain factor of the current MPE filter. 24 Devices Mi 14:51 1 MPE- MPE+ 2 3 MAP 1: 8/9 pages Freq- Freq+ 4 Current Activity Devices Mi 14:51 1 Q- Q+ 2 3 Gain- Gain+ 4
Tip: • For further information on the use and configuration of an parametric, digital equalizer please refer to the documentation of the analyser software CARMA which is available for download free of charge on our internet site www.audionet.de. Screen page 9 2 MAP 1: 9/9 pages Power Toggle Current Activity 1 If the MAP 1 is in stand-by mode, press key Power On to switch the unit on. 2 Use Power Toggle to switch on/off the MAP 1. This key has the same function as the key power on the front panel. If the MAP 1 is in stand-by mode, Power Toggle will switch on the unit. If the MAP 1 is already switched on, Power Toggle will switch off the unit to stand-by mode. 3 If the MAP 1 is switched on, use key Power Off to switch the unit off to stand-by mode. 25 Power On Devices Mi 14:51 1 Power Off 3
- Page 1: Multi Channel Audio/Video Pre - Amp
- Page 4 and 5: Placement and connection Important:
- Page 6 and 7: Overview of connections 7 Digital i
- Page 8 and 9: (refer to owner's manual of VIP), t
- Page 10 and 11: configured. Your MAP 1 needs inform
- Page 12 and 13: Overview of menu structure RUN Mode
- Page 14 and 15: 5 Activities key: Press this key to
- Page 16 and 17: 3 Vol+ , increases the volume of th
- Page 18 and 19: Screen page 3 MAP 1: 3/9 pages Curr
- Page 20 and 21: If this reference level is set corr
- Page 22 and 23: to the names of the other user sett
- Page 26 and 27: Setup Description of all menu items
- Page 28 and 29: Menu Channel Setup This menu compri
- Page 30 and 31: Edit Channel Name: While in menu Ch
- Page 32 and 33: Note: • This menu item is only av
- Page 34 and 35: Note: • This setting refers to Li
- Page 36 and 37: Subwoofer: If a subwoofer is availa
- Page 38 and 39: Display While in RUN mode the 2 nd
- Page 40 and 41: On the left of the 2 nd line the pr
- Page 42 and 43: On Screen Display (OSD) Activate th
- Page 44 and 45: setting for digital and analog DVI
- Page 46 and 47: Note: • If the optional DVI Modul
- Page 48 and 49: Settings for analog RGB-video outpu
- Page 50 and 51: USB Audio With the USB Audio interf
- Page 52 and 53: • The USB Audio input of the MAP
- Page 54 and 55: Security advice • Avoid packaging
Leave the equalizer setup mode by using one of the other setup m<strong>en</strong>u keys. The MAP 1<br />
th<strong>en</strong> <strong>en</strong>ters the corresponding m<strong>en</strong>u. If you wait for approx. 12 seconds without pressing<br />
any key, the MAP 1 will return to RUN mode automatically.<br />
1 MPE- selects the previous MPE *) filter of the curr<strong>en</strong>t channel.<br />
2 MPE+ selects the next MPE filter of the curr<strong>en</strong>t channel.<br />
3 Freq- decreases the c<strong>en</strong>ter frequ<strong>en</strong>cy of the curr<strong>en</strong>t MPE filter.<br />
4 Freq+ increases the c<strong>en</strong>ter frequ<strong>en</strong>cy of the curr<strong>en</strong>t MPE filter.<br />
*) MPE = Minimum Phase Equalizer<br />
Scre<strong>en</strong> page 8<br />
MAP 1:<br />
7/9 pages<br />
Curr<strong>en</strong>t<br />
Activity<br />
1 Q- decreases the Q-factor of the curr<strong>en</strong>t MPE filter.<br />
2 Q+ increases the Q-factor of the curr<strong>en</strong>t MPE filter.<br />
3 Gain- decreases the gain factor of the curr<strong>en</strong>t MPE filter.<br />
4 Gain+ increases the gain factor of the curr<strong>en</strong>t MPE filter.<br />
24<br />
Devices<br />
Mi 14:51<br />
1 MPE- MPE+<br />
2<br />
3<br />
MAP 1:<br />
8/9 pages<br />
Freq- Freq+ 4<br />
Curr<strong>en</strong>t<br />
Activity<br />
Devices<br />
Mi 14:51<br />
1 Q- Q+<br />
2<br />
3<br />
Gain- Gain+ 4