The radio receiver Audionet CAT: natural broadcasting.

The radio receiver Audionet CAT:
natural broadcasting.
An analogue radio set, the Audionet CAT is a classical radio with modern
setting and search capabilities and the best audio characteristics for
broadcasting FM and AM radio programmes in optimal sound. Its sound
reproduction, as fruity as it is lithe, convinces the listener with the
quantity of information provided and its succinct spatial performance.
With its unheard-of purity, transparency and dynamism, the CAT gives
radio a new sound. You will hardly believe how good radio can be. The
analogue receiver unit decodes antenna and cable signals accurately and
with great sensitivity. Signals are processed and transferred via Audionet‘s
award-winning tried and tested ULA technology.
Press commentary:
The circuitry is produced for exemplary distortion-freedom, speed and
stability. Its construction is designed to enable the individual channels to
work as independently from each other as possible. Using only hand-picked
components, we have succeeded in reducing sound-damaging influences to
the bare minimum, thus guaranteeing exemplary reproduction stability.
The sensitivity of the CAT channel search can be adjusted; it displays the
station name and other radio information in clear-text. The CAT can be
remote controlled and comes with remote activation via Audionet Link.
tom Franzen, Stereo: (…) An energetic impulsive sound with an attractive spatiality. (…) The output signal is ready in its cinch and symmetric XLR bushings. Good handling.
With a poled mains phase, a warning is displayed after activation. (…) The sound is pure energy.

General Information and Technical Data CAT:
// Function
analog FM/AM radio receiver
// Special FeatureS
number of presets: 99
radio data system RDS
direct frequency selection
switchable receiver sensitivity
remote activation over Audionet Link
(optical fiber)
automatic mains phase recognition
// optionS
external power supply Audionet EPS G2
Audionet System Remote Control
Harmony One
Find out more: www.audionet.de
Listen and be amazed.
// in- anD outputS
inputs
1 FM antenna, 75 Ohm
1 MW antenna, double-pole
audio outputs:
1 pair RCA sockets, single-ended,
gold-plated and Teflon insulated
1 pair Neutrik XLR, balanced,
gold-plated
remote activation
1 Audionet Link OUT, optical (TosLink)
external power supply EPS G2: 7-pin
socket
mains
IEC male power insert connector
// SpeciFicationS
input frequency range
FM 87.5-108.0 MHz
AM 522-1611 kHz
frequency response
30 - 15,000 Hz (+/- 1dB)
THD + N
66 dB
output impedance
68 Ohm
mains
220..240 Volt / 50..60 Hz
also available in
110..120 Volt / 50..60 Hz
power consumption
max. 30 W
dimensions & weight
430 * 70 * 310 mm, 8 kg
// FiniSh
front
brushed aluminium, 10 mm, black
anodized, light grey printing or
brushed aluminium, 10 mm, silver
anodized, black printing
display
red or blue
cover
aluminium, 2 mm, black anodized
chassis
2 mm sheet steel, black varnished
The incomparable listening room which we have developed enables us to evaluate tonal signals and check their
quality, so as to identify even the smallest tonal differences. Without going into overly-much detail, you can expect
that we have invested as much effort in this creation as we put into the development of our amplifiers and players.
Experience an acoustically overwhelming environment in which absolutely no musical information is lost.
If you would like to experience this truly astounding acoustic experience, just get in touch.
Audionet is a registered trademark of
IDEKTRON Unternehmens- und Technologieberatung GmbH & Co. Entwicklungs- und Produktions-KG
Herner Straße 299 | 44809 Bochum | fon +49(o)234/50727-0 | fax +49(o)234/50727-27 | kontakt@audionet.de | www.audionet.de
Errors and omissions excepted. Specifications and design are subject to changes without prior notice.