Technical documentation
Technical documentation
Technical documentation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Revisions<br />
W.E.ST. Elektronik GmbH<br />
Date Module revision Comment<br />
14.02.2006 1113 rev 1 New hardware based on the ME5 board.<br />
27.04.2007 1113 rev 2 Software adaptation of the 4… 20 mA output<br />
14.05.2008 1113 rev 3<br />
Ordering code<br />
POS-123A-11* - with analogue ± 10 V output<br />
POS-123I-11* - with analogue 4… 20 mA output<br />
The working direction of the sensor signal is changeable.<br />
AIN:X -1000 1000 10000 V or AIN:X -1250 1000 10000 C<br />
will invert the working range.<br />
Optional<br />
POS-123P - with integrated power stage<br />
POS-123PDP - with integrated Profibus PD and SSI sensor interface (see doc. POS-123PDP)<br />
* = Version number, for ordering not necessary. Changes of the last digit (13 to 14) indicate technical improvements<br />
at 100% compatibility. Changes from 13 to 20 indicate significant technical improvements. In<br />
this case check the <strong>documentation</strong> about the parameter and wiring.<br />
Accessories<br />
RS232-SO - programming cable with RS232C interface<br />
USB-SO - programming cable with USB interface<br />
HHT-302 - Hand held terminal<br />
WPC-300 - Start up software<br />
W.E.ST. Elektronik GmbH<br />
Poststraße 26<br />
D-41372 Niederkrüchten<br />
Fax.: +49 (0) 2163 57 73 55 - 11<br />
Homepage: www.w-e-st.de or www.west-electronics.com<br />
EMAIL: info@w-e-st.de<br />
Date: 14.04.2008<br />
Revision: 9<br />
The right of changes are reserved.<br />
Seite 3 von 24
Change language