Technical documentation - W.E.ST. Elektronik GmbH
Technical documentation - W.E.ST. Elektronik GmbH
Technical documentation - W.E.ST. Elektronik GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SAVE (data storing in EEPROM)<br />
W.E.<strong>ST</strong>. <strong>Elektronik</strong> <strong>GmbH</strong><br />
Kommando Parameter Vorgabe Einheit<br />
save - - -<br />
Every parameter change is immediately active but only saved in RAM. For permanent storing in<br />
EEPROM the command SAVE is used to copy the parameter from RAM into EEPROM memory.<br />
LOADBACK (copy of the EEPROM into the active RAM)<br />
Kommando Parameter Vorgabe Einheit<br />
loadback - - -<br />
Über dieses Kommando können die Daten vom EEPROM wieder ins RAM zurück geschrieben werden.<br />
Dies ist hilfreich, wenn die aktuelle Reglerparametrierung nicht optimal ist.<br />
DEFAULT (parameter reset)<br />
Kommando Parameter Vorgabe Einheit<br />
default - - -<br />
With this command, the data will be written back from EEPROM to RAM. This is helpful when the previous<br />
control parameter (before the last saving) will be reactivated.<br />
PROCESS DATA (monitoring)<br />
Kommando Parameter Einheit<br />
w<br />
c<br />
u<br />
ia<br />
ib<br />
Demand value<br />
Control deviation<br />
Actuator signal<br />
output-current valve A<br />
output current valve B<br />
0,01%<br />
0,01%<br />
0,01%<br />
0,01%<br />
0,01%<br />
The process data can be read out now. They show the actual and command values.<br />
Seite 21 von 22 12.03.2008