Paper Technology Journal 19 - Voith

4
32
3
19/05
Vahit
Gokhan
Project
Manager GAP
INSAAT,
Çalik Holding
“For our new paper machine we have
decided on the solution by Voith as
Voith’s was the one we trusted most.
They were in a position to meet all our
requirements by cooperating in a spirit
of partnership with us. In retrospect I
must say that we made the right
decision. The project was a complete
success.”
Fig. 3: Çalik Holding, plant Yaslik in Turkmenistan.
Fig. 4: DuoCentriNipcoFlex press.
Fig. 5: Winder.
tioned raw materials, the resulting paper
comes up to all expectations.
To everyone’s satisfaction, the production
line was inaugurated on 21st May
2004 in an unforgettable ceremony, in
the presence of the Turkmenistan President
Mr. Saparmyrat Türkmenba¸sy and
Dr. Hermut Kormann, President and CEO
of the Corporate Management Board of
Voith AG. The mill is now a good reference
and can be visited by potential customers
of the Middle East area.
For this PM Voith has
delivered:
● Masterjet FB Headbox with ModuleJet
dilution water technology for best
basis weight distribution and fiber
orientation, lamellas to improve paper
structure and a Profilmatic control
concept.
● Fourdrinier and Duoformer D for a
good formation and symmetric dewatering.
● DuoCentriNipcoFlex press to ensure
highest dry content, since straw pulp
has a high content of fines.
● Double tier pre- and after dryer
section, SpeedSizer, rope tail-transfer
system.
● DuoSoftNip Calender with thermo rolls
heated with warm oil in order to
minimize two-sidedness.
● Reel wind-up diameters up to
2,600 mm, jumbo rolls magazine,
Unwind and Variflex S Winder.
The order included also lubrication system
and basic process engineering.
5