KippMed Catalog - CareFusion

ordering
Information
Customer Support:
For information or assistance please contact customer service
toll-free at 1-800-520-7999, or 1-909-390-9080, or please visit
our website at www.medegen.com/mms
Terms and Conditions:
All pricing is F.O.B. Ontario, CA. Purchase orders should be
addressed to:
Address:
Medegen Medical
930 Wanamaker Ave
Ontario, CA 91761
Fax: 909-390-9081
For email orders please contact the customer service
department.
Approved credit terms:Net 30 days
Return Goods Policy:
All returned goods must be approved prior to return and be
accompanied by a Return Material Authorization (RMA) number.
Special (non-standard) orders are not eligible for return
unless product is proven defective.
A 15% restocking charge to apply against returns due to
incorrect orders and must be returned within 30days of invoice
date and must be in original, sealed packaging.
For a full list of terms and conditions please contact customer
service.
Breakdown of part number code:
Part Number=
1000-100-004
1000=
Component
Identification
Code
100=
Tubing Diameter
Code/ Custom
Application Code
004=
Material
Code
Note on product drawings: All dimensions are for reference only.
Measurements shown are in inches/mm. Individual procurement
drawings available upon request. Inquire about additional sizes and
material availability.
Material
Code
001
004
007
008
009
022
023
024
027
031
032
043
056
062
069
071
072
073
078
079
080
081
082
083
088
090
091
092
101
102
103
Resin Type
ISO 13485 Certified
Polycarbonate
Acrylic
Polypro
Polypro
Acrylic
ABS
Polyethylene
Low density Polyethylene
Linear low density Polyethylene
Polyester
Polycarbonate
Copolyster
Polypro
Polypro
ABS
PVC
Polyethylene
Polyethylene
Low density Polyethylene
Polycarbonate
Acrylic
Low density Polyethylene
Polypro
ABS
Polypro
PVC
Low density Polyethylene
Polycarbonate
ABS
ABS
Low density Polyethylene

Needleless
access
Connectors
KippMed’s needleless access connectors feature a dual
seal, coupled with Tru-Swab Technology, which prevents
microbial ingress by allowing for thorough disinfection of the
access site during swabbing.
The Leader’s Choice ®
3

4
NAC prn
FEATURES
Dual seal technology
Tru-Swab Technology
No metal components
Meets ISO specifications
3 piece design
Patented design
Lipid resistant polycarbonate material
Latex free
Materials available for gamma radiation and
ETO sterilization
Options:
Part Number
9100-022 (clear)
9100-079 (opaque)
benefits
P/N NAC prn
Ensures closure upon luer disconnection
Safe for use throughout the hospital
High visibility of fluid pathway for clinical
monitoring
Compatible with all ISO luers
Patent # 5,782,816
Wide range of applications: Anesthesia, IV
fluid delivery, contrast media delivery,
dialysis sets, etc.
nac prn

nac y-site P/N nac-yxxx
FEATURES
Tru-Swab Technology
Largest selection of bond pocket sizes
Dual seal technology
No metal components
Meets ISO specifications
3 piece design
Patented design
Lipid resistant polycarbonate
Latex free
Materials available for gamma radiation and
ETO sterilization
Options:
Part
Number
NAC-Y088
NAC-Y140
NAC-Y143
NAC-Y164
NAC-Y170
“A” Inside Tubing
Fitment
.090/.082(2.29/2.08)
.143/.134(3.63/3.40)
.143/.136(3.63/3.45)
.165/.152(4.19/3.86)
.160/.158(4.06/4.01)
nac-yxxx
benefits
Accommodates many tubing sizes
Eliminates assembly step and decreases
inventory
Ensures closure upon luer disconnection
Safe for use throughout the hospital
High visibility of fluid pathway for clinical
monitoring
Compatible with all ISO luers
Patent # 5,782,816
Wide range of applications: Anesthesia, IV
fluid delivery, contrast media delivery,
dialysis sets, etc.
“B” Fitment
Depth
.375(9.53)
.375(9.53)
.375(9.53)
.375(9.53)
.375(9.53)
“C” Overall
Length
1.44(36.57)
1.44(36.57)
1.44(36.57)
1.44(36.57)
1.44(36.57)
5

male luer
lock adaptors
Male luer lock adaptors offer high-low ribs, smooth edges,
and full threads for positive connection to female luer lock
adaptors.
The Leader’s Choice ®
7

male luer lock adaptor
FEATURES
Wide variety of bond pocket sizes
Wide selection of materials
ISO compliant
Materials available for gamma radiation and
ETO sterilization
Options:
Part Number
“A” Inside Diameter
Tubing Fitment Taper
“B” Outside Diameter “C” Thru Hole
Diameter
benefits
P/N 1001-XXX-XXX
Accommodates many tubing sizes
Safe for use with a variety of drugs, fluids
and solvents
Compatible with all ISO luers and caps
Wide range of applications: anesthesia, IV
fluid delivery, contrast media delivery, etc.
“D” Fitment Depth Overall Length
(mm)
Materials Available
1001-062 .065/.055(1.65/1.40) .150/.154(3.81/3.91) .045(1.14) .450(11.43) .950
004
1001-078 .082/.072(2.08/1.83) .150/.154(3.81/3.91) .062(1.57) .450(11.43) .950
004,009,071
1001-080 .088/.075(2.24/1.91) .150/.154(3.81/3.91) .062(1.57) .450(11.43) .950
004
1001-085 .088/.077(2.24/1.98) .150/.154(3.81/3.91) .062(1.57) .450(11.43) .950
004,022,071
1001-088 .090/.085(2.29/2.16) .150/.154(3.81/3.91) .062(1.57) .450(11.43) .950
004,022
1001-095 .100/.090(2.54/2.29) .150/.154(3.81/3.91) .062(1.57) .370(9.40) .950
004,071
1001-105 .106/.100(2.69/2.54) .150/.154(3.81/3.91) .062(1.57) .450(11.43) .950
004,009,022,071,083
1001-110 .115/.105(2.92/2.67) .150/.154(3.81/3.91) .098(2.49) .450(11.43) .950
004,022
1001-124 .128/.118(3.25/3.00) .212/.218(5.38/5.54) .098(2.49) .450(11.43) .950
004
1001-130 .134/.123(3.40/3.12) .212/.218(5.38/5.54) .098(2.49) .450(11.43) .950
004
1001-143 .150/.135(3.80/3.43) .212/.218(5.38/5.54) .098(2.49) .450(11.43) .950
004,022
1001-145 .142/.123(3.61/3.12) .212/.218(5.38/5.54) .098(2.49) .450(11.43) .950
022
1001-149 .145/.138(3.68/3.51) .212/.218(5.38/5.54) .098(2.49) .450(11.43) .950
004
1001-156 .163/.131(4.14/3.33) .212/.218(5.38/5.54) .098(2.49) .450(11.43) .950
004,022,071
1001-173 .178/.168(4.52/4.27) .254/.260(6.45/6.60) .098(2.49) .450(11.43) .950
004
1001-187 .192/.182(4.88/4.62) .254/.260(6.45/6.60) .125(3.18) .450(11.43) .950
004,022
**1005-146 .170/.146(4.32/3.71) .254/.260(6.45/6.60) .098(2.49) .400(10.16) .950
004,022
**Note: The tubing fitment of p/n 1005-146-xxx is a female luer slip. It can be used for attachment to a male luer slip, rubber sleeve stopper (injection site) or tubing engagement.
1001-xxx-xxx
9

male luer
lock caps
KippMed’s vented and non-vented male luer lock caps are
available in a wide variety of materials and colors; these
caps can be used as dust covers or dead-ender caps for
many product configurations.
The Leader’s Choice ®
11

12
VENTED MALE luer lock CAP
FEATURES
Standard luer taper, vented through center
Variety of materials and colors available
upon request
Universal luer lock thread
ISO compatible
Smooth edges
High-low ribs
Materials available for gamma radiation and
ETO sterilization
Options:
benefits
P/N 1007-XXX-XXX
Accommodates all standard female luers
Allows for contact to female luers
Locks onto all standard female luers
Ensures solid grip
Prevents skin abrasions
Part Number “A” Inside Diameter Materials Available
1007-000
1007-021
1007-027
1007-030
1007-125
.058(1.47)
.021(.533)
.027(.685)
.030(.762)
.125(3.17)
Compatible with all ISO luers and caps
007,008,072,101,102
008*
101*
008*
004*
*special material/
minimum order applies
1007-xxx-xxx

NON-VENTED MALE luer lock CAP
FEATURES
Standard luer taper, non-vented
Variety of materials and colors available
upon request
Universal luer lock thread
ISO compatible
Smooth edges
Materials available for gamma radiation and
ETO sterilization
Styles available: vented, non vented and non
vented recessed luer
Options:
Part Number Materials Available
1008-000
1008-153
Recessed
shortened luer:
1008-162
benefits
004,007,008,056,072,073,
080,088,101,102
008
007,024,081,101
1008-xxx-xxx
P/N 1008-XXX-XXX
Accommodates all standard female luers
Allows for contact to female luers
Locks onto all standard female luers
Ensures solid grip
Prevents skin abrasions
Compatible with all ISO luers and caps
13

male luer
slip adaptors
KippMed’s male luer slip adaptors with hex feature can be
used separately or in conjunction with hex and 12pt thru hole
threaded locking hubs.
The Leader’s Choice ®
15

male luer Slip
P/N 1013-XXX-XXX
FEATURES
Wide variety of bond pocket sizes
Hub locks onto male luer
Luer slip taper is made with friction ramp
ISO compliant
Materials available for gamma radiation and
ETO sterilization
Designed for use with threaded locking hub (p/n 2013)
Options:
Part Number “A” Inside Tubing
Fitment
1013-078
1013-084
1013-090
1013-143
1013-156
.080/.072(2.03/1.83)
.078/.080(1.98/2.03)
.095/.086(2.41/2.18)
.142/.134(3.61/3.40)
.152/.135(3.86/3.43)
“B” Thru Hole
Diameter
.056(1.42)
.056(1.42)
.056(1.42)
.082(2.08)
.082(2.08)
benefits
Accommodates many tubing sizes
Safe for use with a variety of drugs, fluids
and solvents
Provide mechanical advantage when
disconnected
Compatible with all ISO luers and caps
Friction ramp eliminates inadvertent
disconnect
Fitment Depth Materials Available
.425(10.80)
.425(10.80)
.425(10.80)
.375(9.53)
.633(16.08)
1013-xxx-xxx
022
022
022
004,022
004,022
17

male luer
protector caps
Designed as a non-luer contact, tortuous path sterility barrier
when used exclusively with KippMed’s male luer lock
adaptors and T-adaptors.
The Leader’s Choice ®
19

20
male luer Protector cap
FEATURES
Non-luer contact with a tortuous path to
assist in creating a sterile barrier
Breather cap
High-low ribs
ISO compatible
Materials available for gamma radiation and
ETO sterilization
Options:
Part
Number
1054-288
Materials
Available
024
benefits
P/N 1054-288-024
Vented with standoffs, so it does not contact
the male luer taper
Safe for use with a wide variety of drugs,
fluids, and solvents
Compatible with all ISO luers and caps
Ensures solid grip to engage luer
Wide range of applications: Anesthesia, IV
fluid delivery, contrast media delivery,
dialysis sets, etc.
1054-288-024

male luer Protector cap
FEATURES
Male luer protective breather cap (push
on) designed as a non luer contact, tortuous
path sterility barrier when used exclusively
with KippMed male and female luer lock
adaptors and T-adaptors
ISO compatible
Materials available for gamma radiation and
ETO sterilization
Options:
Part
Number
1057-292
Materials
Available
1057-292-024
024
benefits
P/N 1057-292-024
Vented with standoffs, so it does not contact
the female taper
Safe for use with a wide variety of drugs,
fluids, and solvents
Compatible with all ISO luers and caps
Ensures solid grip to engage luer
Wide range of applications: Anesthesia, IV
fluid delivery, contrast media delivery,
dialysis sets, etc.
21

22
Shroud cap P/N 1080-427-xxx
FEATURES
Snap-on design breather cap
Vented with tortuous path
Gripper ribs
ISO compatible
Materials available for gamma radiation and
ETO sterilization
Options:
Part
Number
1080-427 024
Materials
Available
benefits
Ease of assembly
Allows priming of line with cap on
Easy removal
Safe for use with a variety of drugs, fluids,
and solvents
Compatible with all ISO luers
Wide range of applications: Anesthesia, IV
fluid delivery, contrast media delivery,
dialysis sets, etc.
1080-427-xxx

Female luer
lock adaptors
KippMed’s female luer lock adaptors offer gripper wings and
smooth edges, along with numerous tubing fitment ends to
accommodate a variety of tubing sizes.
The Leader’s Choice ®
23

24
Female Luer Lock Adaptor
FEATURES
Wide variety of bond pocket sizes
Wide selection of materials
ISO compatible
Gripper wings
Materials available for gamma radiation and
ETO sterilization
Options:
Part Number “A” Inside Diameter
Tubing Fitment Taper
1022-053
1022-062
1022-078
1022-080
1022-085
1022-091
1022-104
1022-130
1022-140
1022-143
1022-156
1022-187
.056/.046(1.42/1.17)
.065/.056(3.81/1.42)
.082/.073(2.08/1.85)
.085/.075(2.16/1.91)
.088/.079(2.24/2.00)
.096/.086(2.44/2.18)
.114/.100(2.90/2.54)
.134/.124(3.40/3.15)
.155/.130(3.94/3.30)
.150/.136(3.81/3.45)
.163/.134(4.14/3.40)
.192/.183(4.88/4.65)
benefits
“B” Outside Diameter “C” Thru Hole “D” Overall
Diameter Length
.150/.154(3.81/3.91) .032(0.81) .850(21.59)
.150/.154(3.81/3.91) .042(1.07) .850(21.59)
.150/.154(3.81/3.91) .059(1.50) .850(21.59)
.150/.154(3.81/3.91) .059(1.50) .850(21.59)
.150/.154(3.81/3.91) .059(1.50) .850(21.59)
.150/.154(3.81/3.91) .059(1.50) .850(21.59)
.200/.204(5.08/5.18) .077(1.96) .950(24.13)
.200/.204(5.08/5.18) .095(2.41) .950(24.13)
.254/.260(6.45/6.60) .065(1.65) .950(24.13)
.254/.260(6.45/6.60) .095(2.41) .950(24.13)
.254/.260(6.45/6.60) .122(3.10) .950(24.13)
.254/.260(6.45/6.60) .122(3.10) .950(24.13)
* Special material. Minimum order applies ** Not recommended for OD tube fitment.
P/N 1022-XXX-XXX
Accommodates many tubing sizes
Safe for use with a variety of drugs, fluids
and solvents
Compatible with all ISO luers
Gripper wings make for easier gripping to
disconnect from male luer
Wide range of applications: Anesthesia, IV
fluid delivery, contract media delivery, etc.
“E” Fitment
Depth
.460(11.68)
.460(11.68)
.460(11.68)
.460(11.68)
.460(11.68)
.460(11.68)
.560(14.22)
.560(14.22)
.570(14.48)
.560(14.22)
.560(14.22)
.560(14.22)
Outside Diameter of
Tubing
.053(1.35)
.062(1.57)
.078(1.98)
.080(2.03)
.085(2.16)
.091(2.31)
.104(2.64)
.130(3.30)
.140(3.56)
.143(3.63)
.150(3.81) or .160(4.06)
.187(4.75)
Materials
Available
032
031*,032
032
032
031*,032
032
032
032
001*,079*
032
032
031*,032
1022-xxx-xxx

Female Luer Lock Adaptor
FEATURES
Wide variety of bond pocket sizes
Wide selection of materials
ISO compatible
Gripper wings
PVC material available for gamma radiation
and ETO sterilization
Options:
Part Number “A” Inside Diameter
Tubing Fitment Taper
1023-062
1023-078
1023-080
1023-085
1023-092
1023-104
1023-105
1023-127
1023-130
1023-143
1023-156
1023-173
1023-187
.065/.056(3.81/1.42)
.082/.073(2.08/1.85)
.085/.075(2.16/1.91)
.088/.079(2.24/2.01)
.097/.088(2.46/2.24)
.114/.100(2.90/2.54)
.110/.101(2.79/2.57)
.132/.122(3.35/3.10)
.134/.124(3.40/3.15)
.150/.136(4.88/4.65)
.163/.134(4.14/3.40)
.178/.168(4.52/4.27)
.192/.183(4.88/4.65)
benefits
“B” Outside Diameter “C” Thru Hole “D” Overall
Diameter Length
.150/.154(3.81/3.91) .042(1.07) .850(21.59)
.150/.154(3.81/3.91) .059(1.50) .850(21.59)
.150/.154(3.81/3.91) .059(1.50) .850(21.59)
.150/.154(3.81/3.91) .059(1.50) .850(21.59)
.200/.204(5.08/5.18) .062(1.57) .950(24.13)
.200/.204(5.08/5.18) .077(1.96) .950(24.13)
.200/.204(5.08/5.18) .090(2.29) .950(24.13)
.200/.204(5.08/5.18) .098(2.49) .950(24.13)
.200/.204(5.08/5.18) .095(2.41) .950(24.13)
.254/.260(6.45/6.60) .095(2.41) .950(24.13)
.254/.260(6.45/6.60) .122(3.10) .950(24.13)
.254/.260(6.45/6.60) .125(3.18) .950(24.13)
.254/.260(6.45/6.60) .122(3.10) .950(24.13)
P/N 1023-XXX-XXX
Accommodates many tubing sizes
Safe for use with a variety of drugs, fluids
and solvents
Compatible with all ISO luers
** Not recommended for OD tube fitment.
1023-xxx-xxx
Gripper wings make for easier gripping to
disconnect from male luer
Wide range of applications: Anesthesia, IV
fluid delivery, contract media delivery, etc.
“E” Fitment
Depth
.460(11.68)
.460(11.68)
.460(11.68)
.460(11.68)
.560(14.22)
.560(14.22)
.560(14.22)
.560(14.22)
.560(14.22)
.560(14.22)
.560(14.22)
.560(14.22)
.560(14.22)
Outside Diameter of
Tubing
.062(1.57)
.078(1.98)
.080(2.03)
.085(2.16)
.092(2.34)
.104(2.64)
.105(2.67)
.127(3.23)
.130(3.30)
.143(3.63)
.150(3.81) or .160(4.06)
.173(4.39)
.187(4.75)
Materials
Available
071
071
071
071
071
071
071
071
071
071
071
071
071
25

26
Female Luer Lock Adaptor
FEATURES
Wide variety of bond pocket sizes
Wide selection of materials
ISO compliant
Gripper wings
Materials available for gamma radiation and
ETO sterilization
Options:
Part Number “A” Inside Diameter
Tubing Fitment Taper
1024-078
1024-085
1024-105
1024-134
1024-156
1024-162
.081/.073(2.05/1.85)
.088/.079(2.23/2.00)
.110/.101(2.79/2.56)
.145/.123(3.68/3.12)
.152/.134(3.86/3.40)
.163/.151(4.14/3.83)
** Not recommended for OD tube fitment.
“B” Thru Hole
Diameter
.059(1.49)
.059(1.49)
.090(2.28)
.095(2.41)
.122(3.09)
.122(3.09)
benefits
“C” Fitment
Depth
P/N 1024-XXX-XXX
Accommodates many tubing sizes
Lipid and alcohol resistant materials
Safe for use with a variety of drugs, fluids
and solvents
Compatible with all ISO luers and caps
Gripper wings make for easier gripping to
disconnect from male luer
Wide range of applications: anesthesia, IV
fluid delivery, contrast media delivery, etc.
.445(11.30)
.445(11.30)
.445(11.30)
.455(11.30)
.455(11.30)
.445(11.30)
“D” Overall Length Materials
Available
.850(21.59)
.850(21.59)
.850(21.59)
.850(21.59)
.850(21.59)
.850(21.59)
043
043
043
043
043,079,092
043
1024-xxx-xxx

Female Luer Lock Adaptor
FEATURES
Wide variety of bond pocket sizes
Full thread for maximum thread engagement
ISO compliant
Gripper wings
Materials available for gamma radiation and
ETO sterilization
Options:
Part Number “A” Inside Diameter
Tubing Fitment Taper
1029-088
1029-104
.091/.082(2.31/2.08)
.109/.099(2.77/2.51)
** Not recommended for OD tube fitment.
“B” Outside Diameter “C” Thru Hole
Diameter
.200(5.08)
.200(5.08)
benefits
P/N 1029-XXX-XXX
Accommodates many tubing sizes
Lipid and alcohol resistant materials
Safe for use with a variety of drugs, fluids
and solvents
Compatible with all ISO luers and caps
1029-xxx-xxx
Gripper wings make for easier gripping to
disconnect from male luer
Wide range of applications: anesthesia, IV
fluid delivery, contrast media delivery, etc.
.058(1.47)
.080(2.03)
“D” Overall Length “E” Fitment
Depth
.950(24.13)
.950(24.13)
.560(14.22)
.560(14.22)
Materials
Available
071,090
090
27

Female luer
lock caps
KippMed’s female luers are standard, economically priced
end caps for male luer lock adaptors feature gripping ribs for
easy application and removal.
The Leader’s Choice ®
29

30
Vented female luer cap
FEATURES
Gripper ribs
ISO compatible
Materials available for gamma radiation and
ETO sterilization
Options:
Part
Number
1073-000
1073-150
Materials
Available
023
023
benefits
P/N 1073-xxx-xxx
Safe for use with a variety of drugs, fluids,
and solvents
Ribs allow for easy removal
Compatible with all ISO luers
Wide range of applications: Anesthesia, IV
fluid delivery, contrast media delivery,
dialysis sets, etc.
1073-xxx-xxx

non-vented female luer cap
FEATURES
Gripper ribs
ISO compatible
Materials available for gamma radiation and
ETO sterilization
Options:
Part
Number
1074-000
Materials
Available
008*,027
benefits
P/N 1074-xxx-xxx
Safe for use with a variety of drugs, fluids,
and solvents
Ribs allow for easy removal
Compatible with all ISO luers
1074-xxx-xxx
Wide range of applications: Anesthesia, IV
fluid delivery, contrast media delivery,
dialysis sets, etc.
*Special material.
Minimum order applies.
31

32
female wide wing cap
FEATURES
Selected materials and colors available
upon request
Standard luer taper
Universal luer lock thread
Gripper wings
Vented or non-vented
ISO compatible
Materials available for gamma radiation and
ETO sterilization
Options:
Part
Number
Materials
Available
1075-001 056,062
benefits
P/N 1075-001-xxx
Accommodates all standard male luers
Locks onto all standard male luers, contacts
the male luer taper
Gripper wings make for easy disconnect
from male luer
Compatible with all ISO luers
Wide range of applications: Anesthesia, IV
fluid delivery, contrast media delivery,
dialysis sets, etc.
1075-001-xxx

female luer
protector caps
KippMed’s female protectors are designed as a non-luer
contact, tortuous path sterility barriers when used with
KippMed’s luer lock adaptors.
The Leader’s Choice ®
33

34
Female luer Protector cap
FEATURES
Non-luer contact with a tortuous path to
assist in creating a sterile barrier
Breather cap
High-low ribs
ISO compatible
Materials available for gamma radiation and
ETO sterilization
Options:
Part
Number
1052-256
Materials
Available
024
benefits
P/N 1052-256-024
Vented with standoffs, so it does not contact
the male luer taper
Safe for use with a wide variety of drugs,
fluids, and solvents
Compatible with all ISO luers and caps
Wide range of applications: Anesthesia, IV
fluid delivery, contrast media delivery,
dialysis sets, etc.
1052-256-024

Female luer Protector cap
FEATURES
Non breather cap
Universal luer lock thread
High-low ribs
ISO compatible
Materials available for gamma radiation and
ETO sterilization
Options:
Part
Number
1058-303
Materials
Available
benefits
1058-303-xxx
024
P/N 1058-303-xxx
Locks onto all standard female luers, does
not contact female luer taper
Ensures solid grip to engage luer
Compatible with all ISO luers
Wide range of applications: Anesthesia, IV
fluid delivery, contrast media delivery,
dialysis sets, etc.
35

36
Female luer Protector cap
FEATURES
Breather cap
Crush rib design
ISO compatible
Materials available for gamma radiation and
ETO sterilization
Options:
Part
Number
1060-400 024
Materials
Available
benefits
P/N 1060-400-xxx
Safe for use with a variety of drugs, fluids,
and solvents
Provides ease of assembly while preventing
accidental removal during shipping
Compatible with all ISO luers
Wide range of applications: Anesthesia, IV
fluid delivery, contrast media delivery,
dialysis sets, etc.
1060-400-xxx

manifolds
Pressure activated and inline check valves make KippMed’s
manifolds perfect for use in anesthesia, oncology, surgery,
and critical care.
The Leader’s Choice ®
37

38
2 port manifold
P/N mtpc-003-03
FEATURES
Pressure activated valves
Inline check valve
Rotating male luer lock
ISO compliant
Priming volume < 1.0ml
Housing pressure to 45 PSI/ 3 Bar
Wide port spacing 1.5 inches/ 3.8 cm
Chemically resistant material
Latex free
Materials available for gamma radiation and
ETO sterilization
benefits
Allows syringe connection without risk of
accidental infusion and eliminates stopcock
handles
No retrograde fluid up the IV line
Secure connection
Compatible with all ISO luers
Maximum delivery of drug to the patient
Can be used with any infusion pump
Accommodates multiple 60cc syringes
Can be used to deliver lipids, propofol, and a
wide variety of other drugs.
mtpc-003-03

3 port manifold
P/N mtpc-005-04
FEATURES
Pressure activated valves
Inline check valve
Rotating male luer lock
ISO compliant
Priming volume < 1.0ml
Housing pressure to 45 PSI/ 3 Bar
Wide port spacing 1.5 inches/ 3.8 cm
Chemically resistant material
Latex free
Materials available for gamma radiation and
ETO sterilization
benefits
mtpc-005-04
Allows syringe connection without risk of
accidental infusion and eliminates stopcock
handles
No retrograde fluid up the IV line
Secure connection
Compatible with all ISO luers
Maximum delivery of drug to the patient
Can be used with any infusion pump
Accommodates multiple 60cc syringes
Can be used to deliver lipids, propofol, and a
wide variety of other drugs.
39

spin locs
KippMed’s Spin-Loc rotating male luer locks with retractable
rotating hub are available in macrobore and minibore sizes.
The Leader’s Choice ®
41

42
mAcrobore spin loc
FEATURES
Wide variety of bond pocket sizes
Wide selection of materials
High-low ribs
Full threads
Smooth edges
Retractable and rotating hub
ISO compatible
Materials available for gamma radiation and
ETO sterilization
Options:
Part
Number
9002-000
9003-000
9008-002
“A” Inside Tubing
Fitment
.152/.135(3.86/3.43)
.152/.135(3.86/3.43)
.142/.134(3.61/3.40)
benefits
P/N 900x-xxx
Accommodates many tubing sizes
Ensures solid grip to engage luer
Positive, secure connection to female luer
Limits abrasions to sensitive skin
Allows luer slip connection
Limits catheter tension and torque
Safe for use with a variety of drugs, fluids,
and solvents
Compatible with all ISO luers
“B” Thru Hole
Diameter
.082(2.08)
.082(2.08)
.082(2.08)
“C” Fitment
Depth
.633(16.08)
.633(16.08)
.375(9.53)
Note: Any combination of material is
available. Please call customer service
for further assistance.
900x-xxx

microbore spin loc
FEATURES
Wide variety of bond pocket sizes
Wide selection of materials
High-low ribs
Full threads
Smooth edges
Retractable and rotating hub
ISO compatible
Materials available for gamma radiation and
ETO sterilization
Options:
Part Number “A” Inside Diameter
Fitment Taper
9009-001
9009-010
9009-018
.080/.078(2.03/1.98)
.095/.086(2.41/2.18)
.080/.072(2.03/1.83)
9009-xxx
benefits
P/N 9009-xxx
Accommodates many tubing sizes
Ensures solid grip to engage luer
Positive, secure connection to female luer
Limits abrasions to sensitive skin
Allows luer slip connection
Limits catheter tension and torque
Safe for use with a variety of drugs, fluids,
and solvents
Compatible with all ISO luers
“B” Thru Hole
Diameter
.056(1.42)
.056(1.42)
.056(1.42)
“C” Fitment Depth
.425(10.80)
.425(10.80)
.425(10.80)
Note: Any combination of material
is available. Please call customer
service for further assistance.
43

Straight
Connectors
KippMed’s straight tubing connectors are designed for
transitioning from one inside or outside tubing diameter
to another.
The Leader’s Choice ®
45

46
Straight connector
FEATURES
ISO compatible
Materials available for gamma radiation and
ETO sterilization
Options:
Part
Number
*1061-000
*1061-120
Materials
Available
004
004
benefits
P/N 1061-xxx-xxx
Safe for use with a variety of drugs, fluids,
and solvents
Accommodates many tubing sizes
*Special order. Minimum
order applies.
1061-xxx-xxx

threaded
locking hubs
KippMed’s line of locking hubs offer the option of a more
secure male luer lock connection.
The Leader’s Choice ®
51

52
threaded Locking Hub
FEATURES
Hex and 12 pt. thru hole
Round thru hole
Wide selection of materials
ISO compatible
Smooth edges
High-low ribs
Materials available for gamma radiation and
ETO sterilization
Options:
benefits
P/N 1009-XXX-XXX
More secure male luer lock connection
Safe for use with a variety of drugs, fluids
and solvents
Compatible with all ISO luers and caps
Wide range of applications: anesthesia, IV
fluid delivery, contrast media delivery, etc.
Ensures solid grip to engage luer
Prevents skin abrasions
Note: Use 1009-000/-012 with male slip luer adaptor (p/n 1011)
for fixed male luer. Use 1009-244 with T-adaptors (p/n 1035 and
1036) for a rotating male luer.
Part Number “A” Inside Diameter Materials Available
1009-000
1009-012
1009-193
1009-203
1009-244
Hex
12 pt.
.193(4.90)
.203(5.16)
.244(6.20)
004
004
004,022
004,022
022
1009-xxx-xxx

threaded locking hub
FEATURES
Smooth edges
High-low ribs
ISO compatible
Materials available for gamma radiation and
ETO sterilization
Note: Use with male luer slip adaptor (p/n 1013) for rotating male
luer.
Options:
Part
Number
2013-150
2013-280
Materials
Available
022
022
benefits
P/N 2013-xxx-xxx
Offers option of a more secure male luer
lock connection
Prevents skin abrasions
Ensures solid grip to engage luer
2013-xxx-xxx
Safe for use with a variety of drugs, fluids,
and solvents
Wide range of applications: Anesthesia, IV
fluid delivery, contrast media delivery,
dialysis sets, etc.
53

miscellaneous
KippMed offers a complete line of drip chambers, clamps
and vial access devices at competitive prices to meet
your needs.
The Leader’s Choice ®
55

56
Drip chamber P/N 9100-xxx
FEATURES
ID/OD bond pocket
Non-DEHP materials
Universal air vent
ISO compatible
Materials available for gamma radiation and
ETO sterilization
Options:
benefits
Provides a secure tubing connection
ID is .120” - .130”
OD is not to exceed .205”
Compatible with most intravenous solutions
Allows for vented and non-vented
applications
Universal drip chamber is available in 10, 15, 20, and 60 drop sizes.
9100-205-208 without filter
9100-214-217 with 15 micron filter
9100-xxx

Pinch clamp P/N JD017
FEATURES
Large pinch clamp
Audible closure indication
Release rib rounded edges
Made for 6.8mm maximum tubing
On/Off design
2000/case
Materials available for gamma radiation and
ETO sterilization
Jd017
Options:
Part
Number
Materials
Available
benefits
JD017 Polypropylene White
Great for large bore tubing
Safety feature to ensure clamping
Smooth on patient’s fragile skin
Accommodates a variety of tubing sizes
Color
57

58
Pinch clamp P/N JD040, 41, 42
FEATURES
Small pinch clamp
Audible closure indication
Release rib rounded edges
Made for 2mm to 5.5 tubing
On/Off design
8000/box
Materials available for gamma radiation and
ETO sterilization
Options:
Part
Number
JD040
JD041
JD042
Materials
Available
Polypropylene
Polypropylene
Polypropylene
benefits
Safety feature to ensure clamping
Smooth on patient’s fragile skin
Accommodates a variety of tubing sizes
Color
White
Red
Blue
Jd040, 41, 42

Slide clamps
P/N kl0923 & kl0924
KL0923
Standard slide clamp
Accommodates .164” tubing
Material LDPE, white
Rounded edges
1600/case
Materials available for gamma radiation and
ETO sterilization
KL0924
Mini slide clamp
Accommodates .062” - .088” tubing
Small opening for removal or addition
Material LDPE, white
Rounded edges
1600/case
KL0923
KL0924
Materials available for gamma radiation and
ETO sterilization
kl0923 & kl0924
59

60
Vial adaptors P/N sfxxx
SF100*
Vial residual less than .002cc
Female luer slip
Sharp tip for easy vial penetration
Fits multiple vial sizes
Can be used for multiple vial withdrawals
Safe for use with a variety of drugs, fluids,
and solvents
SF200s* and sf200l*
Vial residual less than .002cc
Female luer slip
Sharp tip for easy vial penetration
Locking flanges
SF100
SF200s
SF200l
SF200S for use on 13mm (1/2”) vial tops
SF200L for use on 20mm (3/4”) vial tops
Safe for use with a variety of drugs, fluids,
and solvents
* Protective sheath (p/n edge-3) must be purchased with all vial adaptors.
SFxxx

Double ended cap
P/N 1085-708-xxx / 9007-xxx
FEATURES
Non-vented
Available in blister pouches as 9007-xxx,
bulk non-sterile
One end fits male luers the other fits female
luers
Recessed male luer
Variety of colors
Easy grip feature
ISO compatible
benefits
Acts as a flow-stop device on male & female
luers
Easily carried by clinician for quick use as
9007-xxx
Meets requirements for male & female luer
capping
Reduces potential for touch contamination
Colors allow for easy identification
Safe for use with a variety of drugs, fluids,
and solvents
Materials available for gamma radiation and
ETO sterilization
Compatible with all ISO luers
Options:
Part
Number
1085-708
9007-003
Materials
Available
007,056,082,088,
095
Red only
1085-708-xxx
1085-708-xxx
9007-xxx
61