Digipass Plug-In for SBR Administrator Reference - Vasco

Digipass Plug-In for SBR Administrator Reference ODBC Database
3.8.4 Upgrade RADIUS Profiles Information
The upgradeprofiles command is used to upgrade RADIUS profile information from the
format used in Digipass Plug-In for Funk 2.0 and 2.1, to the User Attributes format used in
Digipass Plug-In for SBR 2.2.
Prerequisites
These conditions must be met before this command can be run successfully:
Must be run on the machine on which the SBR Plug-In is installed.
The SBR Plug-In configuration file (dpsbrauth.xml) must be in the default location
(\Bin)
Attribute Group
You may have a custom Attribute Group name set in the SBR Plug-In Configuration. If so, you
will need to have the exact name available. Check the SBR Plug-In Configuration (SBR Settings
tab) if you are unsure.
Upgrade Profile Information
1. Open a command prompt and navigate to the installation’s bin directory by typing:
2. Type:
cd \bin
dpdbadmin upgradeprofiles
The progress and success/failure of the command will be displayed in the command prompt
window.
Command Line Syntax
dpdbadmin upgradeprofiles [-attrgroup ] [-q] [-l] [-v]
Table 27: DPDBadmin upgradeprofiles Command Line Options
Option Description
-attrgroup OPTIONAL. Specifies the name of the Attribute Group to which the RADIUS Profile should be added. If
this is not specified, the default RADIUS will be used.
-q Quiet mode, will not output commentary text.
-l Record messages to a log file.
-v Use verbose logging output.
DPDBadmin upgradeprofiles Command Sample
dpdbadmin upgradeprofiles -attrgroup RADIUS -l c:\temp\upgrade.log
© 2006 VASCO Data Security Inc. 59