Digipass Plug-In for SBR Administrator Reference - Vasco

More documents

Recommendations

Info

Digipass Plug-In for SBR Administrator Reference Error and Status Codes Error Code Message Notes -22 An object error has occurred General-purpose error on an operation on an object. This should be supplemented with more specific details. -23 A required field was missing An operation was attempted without specifying one or more mandatory input fields. -24 Auditing failed An operation failed because auditing was mandatory, but failed. -30 The configuration is invalid The configuration data in the configuration file are invalid. The error record should indicate which specific data were invalid. -31 A type mismatch has occurred General-purpose error when one datatype is expected but a different datatype was provided. -32 One or more objects were not initialized Internal initialization error. More specific error details will be recorded. -33 The cache is full An attempt was made to add an entry to a cache, but the cache has reached its configured maximum size. -34 The cache entry has reached the maximum reference count -35 The system is currently too busy to service the request An attempt was made to retrieve an item from a cache, but the item was already in use and the configuration indicates a limit on the number of times an item can be retrieved from the cache at one time. The system received a new request for processing, but hit a resource usage limit of some type. This indicates that the system is too loaded to handle the request. For example, there may be no spare database connection to use, even after waiting a short time for one to become available. -80 A timeout has occurred An operation failed because of a timeout. -140 A Digipass error has occurred General-purpose failure of a Digipass operation such as OTP verification, Reset PIN, Unlock, etc. This is normally accompanied by a more specific error code and message from the VACMAN Controller library. -150 Delivery of the Virtual Digipass One- Time Password failed A Virtual Digipass OTP was generated successfully, but delivery by text message failed. A separate message will give more details about the failure. -200 The license has expired The License Key has an expiration date set, and the date has passed. A permanent License Key must be obtained. -201 The license data are invalid One of the details embedded into the License Key is invalid for the Component in which it is being loaded. The Component will not be able to use the License Key. This may be IP address, Component Type, or any other detail that can be seen in the License Key text. -202 The License Key is corrupted The signature at the bottom of the License Key is invalid. This would typically occur if the License Key details were modified in any way. -250 Decryption has failed - no Storage Key is specified in the Encryption Settings -251 Decryption has failed - an incorrect Cipher is specified in the Encryption Settings Some encrypted data has been created or modified using configured, rather than default, encryption settings. This error occurs when that data is read by a component that does not have configured encryption settings – the component is therefore unable to decrypt the data. It is necessary to configure the encryption settings in the component. See 4 Sensitive Data Encryption for more information on encryption settings. Some encrypted data has been created or modified using differently configured encryption settings. This error occurs when that data is read by a component with configured encryption settings that use a different Cipher Name – the © 2006 VASCO Data Security Inc. 178
Digipass Plug-In for SBR Administrator Reference Error and Status Codes Error Code -252 Decryption has failed - an incorrect Storage Key is specified in the Encryption Settings Message Notes component is therefore unable to decrypt the data. It is necessary to make sure that the encryption settings in all components are identical. See 4 Sensitive Data Encryption for more information. Some encrypted data has been created or modified using differently configured encryption settings. This error occurs when that data is read by a component with configured encryption settings that use a different Storage Key – the component is therefore unable to decrypt the data. It is necessary to make sure that the encryption settings in all components are identical. See 4 Sensitive Data Encryption for more information. -300 A database error occurred General-purpose error on a database operation. This should be supplemented with more specific details. -350 The request received was discarded A replication update that was received was found to be superseded by a later change. In this case, the update is discarded, as it is no longer relevant. This may occur when creating a record, after a record has been deleted then re-created. It may occur when modifying a record, if a later modification occurred before replication could apply the first change. -351 The request received must be retried A replication update that was received could not be applied immediately. In this case, the update is rejected. The retry mechanism at the source server will re-send the update, according to its configuration settings. This may occur if a record does not exist yet, when trying to apply a modification or deletion. It may occur after a record has been deleted and re-created, when a modification of the record is replicated but the sequence of deletion and re-creation has not been followed in the correct order. -352 A replication queue entry had an invalid hash value When an entry was read from the replication queue before sending, its integrity hash value check failed. This suggests that the queue entry may have been modified since it was added to the queue. In this case, the queue entry is not trusted and an error is reported. -353 The replication queue is full An operation failed because it needed to update the database, but the update could not be added to the Replication queue. If the queue is full, no database updates are allowed, to avoid the databases getting too far out of synchronization. Check the Replication Status dialog in the Administration MMC Interface and the Replication audit messages to investigate why the queue has become full. It is necessary to reduce the queue size in order for the system to continue to function. If this error occurs often, without good reason, consider increasing the maximum queue size. This can be configured in the Replication tab of the Authentication Server Configuration GUI. -500 The Service was already started When trying to start a Service, the Service was already running. -501 The Service was already stopped When trying to stop a Service, the Service was not running. -10051 File name is blank. No file name was specified. -10052 Failed to open File. The file could not be opened. The file does not exist or the user attempting to open the file does not have read permission for the file. © 2006 VASCO Data Security Inc. 179
Page 1 and 2:
Modify these field values (right-cl
Page 3 and 4:
Digipass Plug-In for SBR Administra
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128: Digipass Plug-In for SBR Administra
Page 177: Digipass Plug-In for SBR Administra
Page 185: Digipass Plug-In for SBR Administra
show all

Digipass Plug-In for SBR Administrator Reference - Vasco

Create successful ePaper yourself

Delete template?

Save as template?