Digipass Plug-In for SBR Administrator Reference - Vasco

Digipass Plug-In for SBR Administrator Reference Configuration Settings
11.2.4 Configuration Settings
The table below lists the options, their default values, and a brief explanation of each.
Table 56: Message Delivery Component Configuration Settings
Option
Name
General tab
Config.
GUI Field
Server/ IP Server IP
Address
Default
Value
Notes
This string is the IP address of the local server. It needs to correspond
with the licensing as well as the IP address configured for the
server.Data type: String with valid IP4 address or hostname that can be
resolved through DNS
Server/ Port Port 20003 This integer is the TCP/IP port on which the local server is listening.
Must correspond with the SBR server settings.Data type: Integer with
valid Port address (1-65535)
Gateway/
ProxyIP
Gateway/
ProxyPort
Gateway/
Timeout
Gateway/
MaxConnecti
ons
Tracing/
TraceFile
Tracing/
TraceMask
Gateway-
Acnt/
Username
Gateway-
Acnt/
Password
Proxy IP IP address of the HTTP proxy used by the MDC to contact the HTTP
gateway. This can be used when the firewall settings do not allow a
direct connection.Empty - no proxy being used.Data type: String with
valid IP4 address
Port Port number to contact the HTTP proxy on.Must be supplied if the
ProxyIP setting is used.Data type: Integer with valid Port address (1-
65535)
Proxy
Timeout
Max
Connections
30 Time in seconds that the MDC will wait on a response from the
HTTP/gateway.Data type: integer
10 Maximum allowed number of concurrent connections to the HTTP
gateway.Data type: Integer (1-100)
File Name The file that tracing output should be written to.None – no tracing.Data
type: String
Tracing 0 The tracemask specifies how much tracing is done.0 – no tracing1 –
basic tracing2 – full tracingData type: Integer
(General
tab)Usernam
e
(General
tab)Password
& Confirm
Password
Gateway Settings tab
Gateway/
Description
Gateway/
HTTPMethod
Gateway/
URL
Gateway
Name
Query
Method
Protocol and
Address
Sets the account Username the HTTP gateway. The given value will be
used as content for the variable [acc_User] in the query string.Data
type: String
Sets the account password the HTTP gateway. The given value will be
used as content for the variable [acc_pwd] in the query string.Data
type: String
This is an informational field, naming or describing the HTTP gateway. It
can be set to provide a description for a particular service, but is ignored
by the MDC.Data type: String
POST Designates either the GET or POST method for use in transferring
account and message data to the HTTP/HTTPS gateway.Data type:
String (“GET” or “POST”)
Required parameter.Sets the URL to the HTTP gateway. The address
should not contain any variables, but is should contain the protocol
identifier.Note: the protocol identifier of “https://” can be used to SSLencrypt
the link between the MDC and the HTTP gateway. In this case it
is required to specify a filename where the server certificates can be
found.Data type: String
Gateway/ Query String