Digipass Plug-In for SBR Administrator Reference - Vasco

Digipass Plug-In for SBR Administrator Reference Configuration Settings
11 Configuration Settings
11.1 SBR Plug-In
A Graphical User Interface (GUI) is available for use in configuring the SBR Plug-In To open
the SBR Plug-In Configuration GUI, click on the Start Button and select Programs -> VASCO
-> Digipass Plug-In for SBR -> SBR Plug-In Configuration.
Note
A restart of the Steel-Belted RADIUS service is required after any change to
SBR Plug-In configuration settings. When exiting the Configuration GUI, you
will be prompted to allow an automatic restart of the service.
11.1.1 RADIUS Attributes
See the RADIUS Attributes topic in the Product Guide for a description of the use of RADIUS
profiles and attributes in the SBR Plug-In.
RADIUS Profile
To use a RADIUS Profile from SBR, these conditions must be met:
The Attribute Group and Profile Attribute Name settings in the Configuration GUI
must have a value.
The Digipass User account must have an entry in their Authorization
Profile/Attribute list as follows:
Attribute Group matches the Attribute Group configuration setting
Name matches the Profile Attribute Name setting
Usage = Profile
Value matches the name of a RADIUS Profile that exists in SBR
Alternatively, if the above conditions are not met, the Default RADIUS Profile
configuration setting matches the name of a RADIUS Profile that exists in SBR.
To configure the SBR Plug-In to use a RADIUS Profile from SBR:
1. Enter an Attribute Group.
2. Enter a Profile Attribute Name.
3. If needed, enter the name of a RADIUS Profile in the Default RADIUS Profile field.
4. Click on Apply.
User Attributes
To set user-specific RADIUS attributes, these conditions must be met:
The Attribute Group setting in the SBR Plug-In Configuration must have a value.
The Set User Attributes checkbox in the SBR Plug-In Configuration must be ticked.
© 2006 VASCO Data Security Inc. 119