77 0700 00 - Page 2 - Tunstall GmbH

Sound detector wall mounted
Z 00 8200 00
General description
The wall mounted sound detector is used for
acoustic monitoring of rooms. It raises automati‐
cally a call caused by acoustic noise.
Behind the removable cover there are control ele‐
ments: The sound detector can be switched ON
and OFF. Sensitivity and time delay can be ad‐
justed.
A potential‐free switch can be connected for
switching ON/OFF the sound detector. This switch
can be installed at a central place.
Order number Product name Notes
Z 00 8200 00 Sound detector wall mounted
The sound detector can be connected to 24 V (e.g.
Flamenco system, EccoLine system) as well as to
40 V (CommuniCall system).
Specification
Adjustable sensitivity, i.e. setting which
loudness causes a call.
Adjustable time delay approx. 1 - 8 seconds,
i.e. setting after which noise duration a call is
raised
Sensitive microphone
Potentiometer for setting sensitivity
DIP switch for setting time delay
DIP switch for switching ON/OFF
LED for checking the level setting
Connection to call system via potential free
contact
Design standard switch housing
Gira Standard 55
Wall mounted
Housing made of break protected and
impact‐resistant thermoplastic with high UV
stability and an easy‐care surface
Technical data
Colour: Pure white semi gloss
similar to RAL 9010
Material: Thermoplastic
Power supply: 24 V DC or 40 V DC
Supply current:
24 Volts: 17 - 44 mA
40 Volts: 23 - 50 mA
Dimensions (HxWxD): 80.7 x 80.7 x 46 mm
Tunstall GmbH, Orkotten 66, 48291 Telgte, Germany, www.tunstall.de Flamenco Data Sheet Date 08/2010 Specifications are subject to change without notice.
91